Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Ta Chen Stainless Pipe Co (TPE:2027) EBITDA Margin % Explanation
EBITDA Margin % is the ratio of EBITDA divided by net sales or Revenue. It is an performance metric measuring company's operating profitability. EBITDA Margin takes depreciation and amortization, interest expense and tax into account, which makes it easy to compare the relative profitability of companies of different sizes in the same industry.
Ta Chen Stainless Pipe Co EBITDA Margin % Related Terms
Ta Chen Stainless Pipe Co EBITDA Margin % Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
TPE:2027 vs NUE, STLD, RS: EBITDA Margin % Comparison
For the Steel subindustry, Ta Chen Stainless Pipe Co's EBITDA Margin %, along with its competitors' market caps and EBITDA Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Ta Chen Stainless Pipe Co EBITDA Margin % vs Steel Industry
For the Steel industry and Basic Materials sector, Ta Chen Stainless Pipe Co's EBITDA Margin % distribution charts can be found below:
* The bar in red indicates where Ta Chen Stainless Pipe Co's EBITDA Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Ta Chen Stainless Pipe Co (TPE:2027) has a EBITDA Margin % of 24.94% as of Jun. 2026. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Ta Chen Stainless Pipe Co and its competitors. This is 96% above median its historical median of 12.73. Over the past decade, Ta Chen Stainless Pipe Co's EBITDA Margin % has ranged from 4.76 to 20.19. According to the industry distribution chart, Ta Chen Stainless Pipe Co ranks #100 out of 611 companies in the Steel industry, placing it in the top 16.4%.
Is Ta Chen Stainless Pipe Co's EBITDA Margin % too high?
Ta Chen Stainless Pipe Co's current EBITDA Margin % of 24.94% is 96% above median its 10-year median of 12.73. Over the past 10 years, this metric has ranged from a low of 4.76 to a high of 20.19. The Steel industry median EBITDA Margin % is 6.56. Ta Chen Stainless Pipe Co's value of 24.94% is 280.2% above this industry median. Based on the distribution chart, Ta Chen Stainless Pipe Co ranks #100 out of 611 companies in the Steel industry, which is in the top quartile — a strong position relative to peers. Overall, Ta Chen Stainless Pipe Co has a GF Score™ of 80/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Ta Chen Stainless Pipe Co's EBITDA Margin % compare to NUE and STLD?
According to the Steel industry distribution chart, Ta Chen Stainless Pipe Co ranks #100 out of 611 companies for EBITDA Margin %. This places Ta Chen Stainless Pipe Co in the top 16% of its industry — outperforming the majority of peers. The industry median EBITDA Margin % is 6.56. Ta Chen Stainless Pipe Co's value of 24.94% is 280.2% above this benchmark. Historically, Ta Chen Stainless Pipe Co's own EBITDA Margin % has ranged from 4.76 to 20.19 over the past decade. While the company's 10-year median is 12.73 vs. the industry median of 6.56, Ta Chen Stainless Pipe Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EBITDA Margin % for a Steel company?
The median EBITDA Margin % among Steel companies is 6.56, based on 611 companies in the industry. Companies in the top quartile (top 25%) have a EBITDA Margin % significantly above this median, while those in the bottom quartile fall well below. However, EBITDA Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Ta Chen Stainless Pipe Co's current EBITDA Margin % of 24.94% is 280.2% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EBITDA Margin % mean?
A high EBITDA Margin % can signal that a stock is expensive relative to its fundamentals. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Ta Chen Stainless Pipe Co and its competitors. For the Steel industry, the median EBITDA Margin % is 6.56 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Ta Chen Stainless Pipe Co's current EBITDA Margin % is 24.94%, which is 96% above median its own 10-year median of 12.73. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Ta Chen Stainless Pipe Co stock overvalued right now?
Based on GuruFocus' analysis, Ta Chen Stainless Pipe Co (TPE:2027) is currently considered Modestly Overvalued. The stock's GF Value™ is NT$43.77, compared to a current price of NT$50.60 — trading 15.6% above its estimated fair value. The current EBITDA Margin % is 24.94%, which is 96% above median its 10-year median of 12.73 and 280.2% above the Steel industry median of 6.56. Ta Chen Stainless Pipe Co's overall GF Score™ is 80/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EBITDA Margin % calculated?
EBITDA Margin % is calculated from a company's financial statements. For Ta Chen Stainless Pipe Co (TPE:2027), the current EBITDA Margin % is 24.94% as of Jun. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Ta Chen Stainless Pipe Co (TPE:2027) Overvalued in 2026?
Based on GuruFocus' analysis, Ta Chen Stainless Pipe Co stock appears to be overvalued.
The current stock price of NT$50.60 is trading 15.6% above its estimated GF Value™ of NT$43.77.
GuruFocus considers Ta Chen Stainless Pipe Co to be Modestly Overvalued.
Key valuation signals for TPE:2027:
EBITDA Margin %: 24.94% (96% above median its 10-year median of 12.73)
GF Value™: NT$43.77 vs. price of NT$50.60 (15.6% above fair value)
Industry Position: 280.2% above the Steel median (#100 of 611)
No single metric tells the full story. See the TPE:2027 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Ta Chen Stainless Pipe Co Ltd is engaged in the manufacturing, processing, and selling of stainless steel pipes and stainless steel pipe fittings, stainless steel plates, as well as the manufacturing and sale of venetian blinds. It is also engaged in the manufacturing and selling of aluminum products and the sale of screws and nuts. The Group's operating segments are: Stainless steel and aluminum, Aluminum manufacturing, Screws and nuts, and Curtain and decorations. The majority of its revenue is derived from the Stainless steel and aluminum segment, which offers stainless steel pipes, stainless steel pipe fittings, as well as stainless steel plates (rolls), bars, and aluminum products. Geographically, the Group generates maximum revenue from the USA, followed by Taiwan and other markets.
80GF Score
Get the complete analysis for TPE:2027
EBITDA Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:2027 has been successfully added to your 
