Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Ta Chen Stainless Pipe Co's PEG Ratio or its related term are showing as below:
TPE:2027'
s PEG Ratio Range Over the Past 10 Years
Min: 0.27 Med: 1.29 Max: 52.85
Current: 1.44
During the past 13 years, Ta Chen Stainless Pipe Co's highest PEG Ratio was 52.85. The lowest was 0.27. And the median was 1.29.
TPE:2027's PEG Ratio is ranked worse than 65.83% of 199
companies
in the Steel industry
Industry Median: 1.3
vs TPE:2027: 1.44
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Ta Chen Stainless Pipe Co (TPE:2027) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Ta Chen Stainless Pipe Co PEG Ratio Related Terms
Ta Chen Stainless Pipe Co PEG Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Steel subindustry, Ta Chen Stainless Pipe Co's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Ta Chen Stainless Pipe Co PEG Ratio vs Steel Industry
For the Steel industry and Basic Materials sector, Ta Chen Stainless Pipe Co's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Ta Chen Stainless Pipe Co's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Ta Chen Stainless Pipe Co (TPE:2027) has a PEG Ratio of 1.44 as of Aug. 25, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Ta Chen Stainless Pipe Co and its competitors. This is 12% above median its historical median of 1.29. Over the past decade, Ta Chen Stainless Pipe Co's PEG Ratio has ranged from 0.27 to 52.85. According to the industry distribution chart, Ta Chen Stainless Pipe Co ranks #131 out of 199 companies in the Steel industry, placing it in the top 65.8%.
Is Ta Chen Stainless Pipe Co's PEG Ratio too high?
Ta Chen Stainless Pipe Co's current PEG Ratio of 1.44 is 12% above median its 10-year median of 1.29. Over the past 10 years, this metric has ranged from a low of 0.27 to a high of 52.85. The Steel industry median PEG Ratio is 1.30. Ta Chen Stainless Pipe Co's value of 1.44 is 10.8% above this industry median. Based on the distribution chart, Ta Chen Stainless Pipe Co ranks #131 out of 199 companies in the Steel industry, which is below the industry midpoint. Overall, Ta Chen Stainless Pipe Co has a GF Score™ of 80/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Ta Chen Stainless Pipe Co's PEG Ratio compare to NUE and STLD?
According to the Steel industry distribution chart, Ta Chen Stainless Pipe Co ranks #131 out of 199 companies for PEG Ratio. This places Ta Chen Stainless Pipe Co in the lower half of its industry. The industry median PEG Ratio is 1.30. Ta Chen Stainless Pipe Co's value of 1.44 is 10.8% above this benchmark. Historically, Ta Chen Stainless Pipe Co's own PEG Ratio has ranged from 0.27 to 52.85 over the past decade. While the company's 10-year median is 1.29 vs. the industry median of 1.30, Ta Chen Stainless Pipe Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for a Steel company?
The median PEG Ratio among Steel companies is 1.30, based on 199 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Ta Chen Stainless Pipe Co's current PEG Ratio of 1.44 is 10.8% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Ta Chen Stainless Pipe Co and its competitors. For the Steel industry, the median PEG Ratio is 1.30 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Ta Chen Stainless Pipe Co's current PEG Ratio is 1.44, which is 12% above median its own 10-year median of 1.29. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Ta Chen Stainless Pipe Co stock overvalued right now?
Based on GuruFocus' analysis, Ta Chen Stainless Pipe Co (TPE:2027) is currently considered Modestly Overvalued. The stock's GF Value™ is NT$43.77, compared to a current price of NT$50.60 — trading 15.6% above its estimated fair value. The current PEG Ratio is 1.44, which is 12% above median its 10-year median of 1.29 and 10.8% above the Steel industry median of 1.30. Ta Chen Stainless Pipe Co's overall GF Score™ is 80/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Ta Chen Stainless Pipe Co (TPE:2027), the current PEG Ratio is 1.44 as of Aug. 25, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Ta Chen Stainless Pipe Co (TPE:2027) Overvalued in 2026?
Based on GuruFocus' analysis, Ta Chen Stainless Pipe Co stock appears to be overvalued.
The current stock price of NT$50.60 is trading 15.6% above its estimated GF Value™ of NT$43.77.
GuruFocus considers Ta Chen Stainless Pipe Co to be Modestly Overvalued.
Key valuation signals for TPE:2027:
PEG Ratio: 1.44 (12% above median its 10-year median of 1.29)
GF Value™: NT$43.77 vs. price of NT$50.60 (15.6% above fair value)
Industry Position: 10.8% above the Steel median (#131 of 199)
No single metric tells the full story. See the TPE:2027 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Ta Chen Stainless Pipe Co Ltd is engaged in the manufacturing, processing, and selling of stainless steel pipes and stainless steel pipe fittings, stainless steel plates, as well as the manufacturing and sale of venetian blinds. It is also engaged in the manufacturing and selling of aluminum products and the sale of screws and nuts. The Group's operating segments are: Stainless steel and aluminum, Aluminum manufacturing, Screws and nuts, and Curtain and decorations. The majority of its revenue is derived from the Stainless steel and aluminum segment, which offers stainless steel pipes, stainless steel pipe fittings, as well as stainless steel plates (rolls), bars, and aluminum products. Geographically, the Group generates maximum revenue from the USA, followed by Taiwan and other markets.
80GF Score
Get the complete analysis for TPE:2027
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:2027 has been successfully added to your 
