Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Ta Chen Stainless Pipe Co (TPE:2027) Forward PE Ratio Explanation
The Forward PE Ratio of a company is often used to compare current earnings to estimated future earnings, as well as gaining a clearer picture of what earnings will look like without charges and other accounting adjustments. If earnings are expected to grow in the future, the Forward PE Ratio will be lower than the current PE Ratio. This measure is also used to compare one company to another with a forward-looking focus.
Trailing PE Ratio relies on what is already done. It uses the current share price and divides by the total EPS (Basic) over the past 12 months. PE Ratio can be affected by Non Operating Income such as the sale of part of businesses. This may increase for the current year or quarter dramatically. But it cannot be repeated over and over. Therefore PE Ratio without NRI is a more accurate indication of valuation than PE Ratio .
Ta Chen Stainless Pipe Co Forward PE Ratio Related Terms
Ta Chen Stainless Pipe Co Forward PE Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Ta Chen Stainless Pipe Co Forward PE Ratio Chart
Ta Chen Stainless Pipe Co Annual Data
Trend
2024-12
2025-12
Forward PE Ratio
9.80
9.43
Ta Chen Stainless Pipe Co Quarterly Data
2024-12
2025-03
2025-06
2025-09
2025-12
2026-03
Forward PE Ratio
9.80
15.98
10.44
9.03
9.43
9.14
TPE:2027 vs NUE, STLD, RS: Forward PE Ratio Comparison
For the Steel subindustry, Ta Chen Stainless Pipe Co's Forward PE Ratio, along with its competitors' market caps and Forward PE Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Ta Chen Stainless Pipe Co Forward PE Ratio vs Steel Industry
For the Steel industry and Basic Materials sector, Ta Chen Stainless Pipe Co's Forward PE Ratio distribution charts can be found below:
* The bar in red indicates where Ta Chen Stainless Pipe Co's Forward PE Ratio falls into.
Ta Chen Stainless Pipe Co Forward PE Ratio Calculation
It's a measure of the price-to-earnings ratio (PE Ratio) using forecasted earnings for the calculation. While the earnings used are just an estimate and are not as reliable as current earnings data, there is still benefit in estimated P/E analysis. The forecasted earnings used in the formula can either be for the next 12 months or for the next full-year fiscal period.
Ta Chen Stainless Pipe Co (TPE:2027) has a Forward PE Ratio of 10.14 as of Aug. 14, 2026. Forward P/E ratio is the share price dividend by the expected per-share earnings in the next 12 months. View historical data on Ta Chen Stainless Pipe Co and its competitors. According to the industry distribution chart, Ta Chen Stainless Pipe Co ranks #36 out of 178 companies in the Steel industry, placing it in the top 20.2%.
Is Ta Chen Stainless Pipe Co's Forward PE Ratio too high?
Ta Chen Stainless Pipe Co's current Forward PE Ratio is 10.14. The Steel industry median Forward PE Ratio is 14.54. Ta Chen Stainless Pipe Co's value of 10.14 is 30.2% below this industry median. Based on the distribution chart, Ta Chen Stainless Pipe Co ranks #36 out of 178 companies in the Steel industry, which is in the top quartile — a strong position relative to peers. Overall, Ta Chen Stainless Pipe Co has a GF Score™ of 78/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Ta Chen Stainless Pipe Co's Forward PE Ratio compare to NUE and STLD?
According to the Steel industry distribution chart, Ta Chen Stainless Pipe Co ranks #36 out of 178 companies for Forward PE Ratio. This places Ta Chen Stainless Pipe Co in the top 20% of its industry — outperforming the majority of peers. The industry median Forward PE Ratio is 14.54. Ta Chen Stainless Pipe Co's value of 10.14 is 30.2% below this benchmark. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Forward PE Ratio for a Steel company?
The median Forward PE Ratio among Steel companies is 14.54, based on 178 companies in the industry. Companies in the top quartile (top 25%) have a Forward PE Ratio significantly above this median, while those in the bottom quartile fall well below. However, Forward PE Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Ta Chen Stainless Pipe Co's current Forward PE Ratio of 10.14 is 30.2% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Forward PE Ratio mean?
A high Forward PE Ratio can signal that a stock is expensive relative to its fundamentals. Forward P/E ratio is the share price dividend by the expected per-share earnings in the next 12 months. View historical data on Ta Chen Stainless Pipe Co and its competitors. For the Steel industry, the median Forward PE Ratio is 14.54 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Ta Chen Stainless Pipe Co's current Forward PE Ratio is 10.14. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Ta Chen Stainless Pipe Co stock overvalued right now?
Based on GuruFocus' analysis, Ta Chen Stainless Pipe Co (TPE:2027) is currently considered Modestly Overvalued. The stock's GF Value™ is NT$41.88, compared to a current price of NT$50.40 — trading 20.3% above its estimated fair value. The current Forward PE Ratio is 10.14 and 30.2% below the Steel industry median of 14.54. Ta Chen Stainless Pipe Co's overall GF Score™ is 78/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Forward PE Ratio calculated?
Forward PE Ratio is calculated from a company's financial statements. For Ta Chen Stainless Pipe Co (TPE:2027), the current Forward PE Ratio is 10.14 as of Aug. 14, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Ta Chen Stainless Pipe Co (TPE:2027) Overvalued in 2026?
Based on GuruFocus' analysis, Ta Chen Stainless Pipe Co stock appears to be overvalued.
The current stock price of NT$50.40 is trading 20.3% above its estimated GF Value™ of NT$41.88.
GuruFocus considers Ta Chen Stainless Pipe Co to be Modestly Overvalued.
Key valuation signals for TPE:2027:
Forward PE Ratio: 10.14
GF Value™: NT$41.88 vs. price of NT$50.40 (20.3% above fair value)
Industry Position: 30.2% below the Steel median (#36 of 178)
No single metric tells the full story. See the TPE:2027 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Ta Chen Stainless Pipe Co Ltd is engaged in the manufacturing, processing, and selling of stainless steel pipes and stainless steel pipe fittings, stainless steel plates, as well as the manufacturing and sale of venetian blinds. It is also engaged in the manufacturing and selling of aluminum products and the sale of screws and nuts. The Group's operating segments are: Stainless steel and aluminum, Aluminum manufacturing, Screws and nuts, and Curtain and decorations. The majority of its revenue is derived from the Stainless steel and aluminum segment, which offers stainless steel pipes, stainless steel pipe fittings, as well as stainless steel plates (rolls), bars, and aluminum products. Geographically, the Group generates maximum revenue from the USA, followed by Taiwan and other markets.
78GF Score
Get the complete analysis for TPE:2027
Forward PE Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:2027 has been successfully added to your 
