Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
I-Chiun Precision Industry Co (TPE:2486) EV-to-EBIT Explanation
This is a more accurate valuation of companies' operation because it considers the debt and cash on its balance sheet, and non-operating items such as interest payment, tax, and one-time items are not included in the Operating Income.
I-Chiun Precision Industry Co's Enterprise Value for the quarter that ended in Jun. 2026 was NT$62,238 Mil.
I-Chiun Precision Industry Co's EBIT for the trailing twelve months (TTM) ended in Jun. 2026 adds up the quarterly data reported by the company within the most recent 12 months, which was NT$523 Mil.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
I-Chiun Precision Industry Co EV-to-EBIT Related Terms
I-Chiun Precision Industry Co EV-to-EBIT Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Electronic Components subindustry, I-Chiun Precision Industry Co's EV-to-EBIT, along with its competitors' market caps and EV-to-EBIT data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
I-Chiun Precision Industry Co EV-to-EBIT vs Hardware Industry
For the Hardware industry and Technology sector, I-Chiun Precision Industry Co's EV-to-EBIT distribution charts can be found below:
* The bar in red indicates where I-Chiun Precision Industry Co's EV-to-EBIT falls into.
I-Chiun Precision Industry Co's current Enterprise Value is NT$64,742 Mil.
I-Chiun Precision Industry Co's EBIT for the trailing twelve months (TTM) ended in Jun. 2026 adds up the quarterly data reported by the company within the most recent 12 months, which was NT$523 Mil.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
I-Chiun Precision Industry Co (TPE:2486) has a EV-to-EBIT of 123.82 as of Aug. 25, 2026. EV to EBIT ratio is the inverse of Joel Greenblatt's earnings yield definition. View historical data on I-Chiun Precision Industry Co and its competitors. This is 430% above median its historical median of 23.37. According to the industry distribution chart, I-Chiun Precision Industry Co ranks #1646 out of 1794 companies in the Hardware industry, placing it in the top 91.8%.
Is I-Chiun Precision Industry Co's EV-to-EBIT too high?
I-Chiun Precision Industry Co's current EV-to-EBIT of 123.82 is 430% above median its 10-year median of 23.37. The Hardware industry median EV-to-EBIT is 18.96. I-Chiun Precision Industry Co's value of 123.82 is 553.1% above this industry median. Based on the distribution chart, I-Chiun Precision Industry Co ranks #1646 out of 1794 companies in the Hardware industry, which is in the bottom quartile relative to peers. Overall, I-Chiun Precision Industry Co has a GF Score™ of 56/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does I-Chiun Precision Industry Co's EV-to-EBIT compare to APH and GLW?
According to the Hardware industry distribution chart, I-Chiun Precision Industry Co ranks #1646 out of 1794 companies for EV-to-EBIT. This places I-Chiun Precision Industry Co in the lower half of its industry. The industry median EV-to-EBIT is 18.96. I-Chiun Precision Industry Co's value of 123.82 is 553.1% above this benchmark. While the company's 10-year median is 23.37 vs. the industry median of 18.96, I-Chiun Precision Industry Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EV-to-EBIT for a Hardware company?
The median EV-to-EBIT among Hardware companies is 18.96, based on 1,794 companies in the industry. Companies in the top quartile (top 25%) have a EV-to-EBIT significantly above this median, while those in the bottom quartile fall well below. However, EV-to-EBIT should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. I-Chiun Precision Industry Co's current EV-to-EBIT of 123.82 is 553.1% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EV-to-EBIT mean?
A high EV-to-EBIT can signal that a stock is expensive relative to its fundamentals. EV to EBIT ratio is the inverse of Joel Greenblatt's earnings yield definition. View historical data on I-Chiun Precision Industry Co and its competitors. For the Hardware industry, the median EV-to-EBIT is 18.96 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. I-Chiun Precision Industry Co's current EV-to-EBIT is 123.82, which is 430% above median its own 10-year median of 23.37. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is I-Chiun Precision Industry Co stock overvalued right now?
Based on GuruFocus' analysis, I-Chiun Precision Industry Co (TPE:2486) is currently considered Significantly Overvalued. The stock's GF Value™ is NT$114.55, compared to a current price of NT$258.00 — trading 125.2% above its estimated fair value. The current EV-to-EBIT is 123.82, which is 430% above median its 10-year median of 23.37 and 553.1% above the Hardware industry median of 18.96. I-Chiun Precision Industry Co's overall GF Score™ is 56/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EV-to-EBIT calculated?
EV-to-EBIT is calculated from a company's financial statements. For I-Chiun Precision Industry Co (TPE:2486), the current EV-to-EBIT is 123.82 as of Aug. 25, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is I-Chiun Precision Industry Co (TPE:2486) Overvalued in 2026?
Based on GuruFocus' analysis, I-Chiun Precision Industry Co stock appears to be overvalued.
The current stock price of NT$258.00 is trading 125.2% above its estimated GF Value™ of NT$114.55.
GuruFocus considers I-Chiun Precision Industry Co to be Significantly Overvalued.
Key valuation signals for TPE:2486:
EV-to-EBIT: 123.82 (430% above median its 10-year median of 23.37)
GF Value™: NT$114.55 vs. price of NT$258.00 (125.2% above fair value)
Industry Position: 553.1% above the Hardware median (#1646 of 1794)
No single metric tells the full story. See the TPE:2486 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
I-Chiun Precision Industry Co Ltd is mainly engaged in the manufacturing, processing, and trading of machinery and parts, electronic parts, parts for appliances, semiconductor LED lead frames, precision molds, etc., as well as relevant import and export trade, and real estate leasing business. The Geographical presence of the company in China, Taiwan, and Other countries. The majority of its revenue is generated from China.
56GF Score
Get the complete analysis for TPE:2486
EV-to-EBIT is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:2486 has been successfully added to your 
