I-Chiun Precision Industry Co (TPE:2486) Piotroski F-Score: 7 (As of Jul. 03, 2026) — 17% Above Median


TPE:2486 I-Chiun Precision Industry Co Ltd TPE:2486
51 GF Score
Price NT$254.00
GF Value NT$82.48
Valuation Significantly Overvalued
! 5 Warning Signs
View Full Analysis

What is I-Chiun Precision Industry Co Piotroski F-Score?

I-Chiun Precision Industry Co TPE:2486 +9.96% 51 Piotroski F-Score is 7 as of Jul. 03, 2026, which is 17% above its 10-year median of 6.00. GuruFocus rates TPE:2486 with a GF Score™ of 51/100 and a GF Value™ of NT$82.48 (Significantly Overvalued). The stock has 5 warning signs investors should review. Among 2,428 Hardware companies, I-Chiun Precision Industry Co ranks better than 90.98% on this metric.

Good Sign:

Piotroski F-Score is 7, indicates a very healthy situation.

The zones of discrimination were as such:

Good or high score = 7, 8, 9
Bad or low score = 0, 1, 2, 3

I-Chiun Precision Industry Co has an F-score of 7. It is a good or high score, which usually indicates a very healthy situation.

The historical rank and industry rank for I-Chiun Precision Industry Co's Piotroski F-Score or its related term are showing as below:

TPE:2486' s Piotroski F-Score Range Over the Past 10 Years
Min: 3   Med: 6   Max: 8
Current: 7

During the past 13 years, the highest Piotroski F-Score of I-Chiun Precision Industry Co was 8. The lowest was 3. And the median was 6.

I-Chiun Precision Industry Co  (TPE:2486) Piotroski F-Score Explanation

The developer of the system is Joseph D. Piotroski is relatively unknown accounting professor who shuns publicity and rarely gives interviews.

He graduated from the University of Illinois with a B.S. in accounting in 1989, received an M.B.A. from Indiana University in 1994. Five years later, in 1999, after earning a Ph.D. in accounting from the University of Michigan, he became an associate professor of accounting at the University of Chicago.

In 2000, he wrote a research paper called "Value Investing: The Use of Historical Financial Statement Information to Separate Winners from Losers" (pdf).

He wanted to see if he can develop a system (using a simple nine-point scoring system) that can increase the returns of a strategy of investing in low price to book (referred to in the paper as high book to market) value companies.

What he found was something that exceeded his most optimistic expectations.

Buying only those companies that scored highest (8 or 9) on his nine-point scale, or F-Score as he called it, over the 20 year period from 1976 to 1996 led to an average out-performance over the market of 13.4%.

Even more impressive were the results of a strategy of investing in the highest F-Score companies (8 or 9) and shorting companies with the lowest F-Score (0 or 1).

Over the same period from 1976 to 1996 (20 years) this strategy led to an average yearly return of 23%, substantially outperforming the average S&P 500 index return of 15.83% over the same period.


I-Chiun Precision Industry Co Piotroski F-Score Related Terms


I-Chiun Precision Industry Co Piotroski F-Score Historical Data

* Premium members only.

The historical data trend for I-Chiun Precision Industry Co's Piotroski F-Score can be seen below:

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

I-Chiun Precision Industry Co Piotroski F-Score Chart

I-Chiun Precision Industry Co Annual Data
Trend Dec16 Dec17 Dec18 Dec19 Dec20 Dec21 Dec22 Dec23 Dec24 Dec25
Piotroski F-Score
Get a 7-Day Free Trial Premium Member Only Premium Member Only 5.00 6.00 8.00 5.00 7.00

I-Chiun Precision Industry Co Quarterly Data
Mar21 Jun21 Sep21 Dec21 Mar22 Jun22 Sep22 Dec22 Mar23 Jun23 Sep23 Dec23 Mar24 Jun24 Sep24 Dec24 Mar25 Jun25 Sep25 Dec25
Piotroski F-Score Get a 7-Day Free Trial Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only 5.00 6.00 3.00 4.00 7.00

TPE:2486 vs APH, GLW: Piotroski F-Score Comparison

For the Electronic Components subindustry, I-Chiun Precision Industry Co's Piotroski F-Score, along with its competitors' market caps and Piotroski F-Score data, can be viewed below:

* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.


I-Chiun Precision Industry Co Piotroski F-Score vs Hardware Industry

For the Hardware industry and Technology sector, I-Chiun Precision Industry Co's Piotroski F-Score distribution charts can be found below:

* The bar in red indicates where I-Chiun Precision Industry Co's Piotroski F-Score falls into.


TPE:2486
51GF Score
I-Chiun Precision Industry Co Ltd TPE:2486
Piotroski F-Score is just one metric. See GF Score™, valuation, warning signs, and more.
View Full Analysis

How is the Piotroski F-Score calculated?

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

This Year (Dec25) TTM:Last Year (Dec24) TTM:
Net Income was -1.991 + -11.364 + 51.174 + 12.799 = NT$51 Mil.
Cash Flow from Operations was 289.359 + 100.065 + -307.799 + 268.94 = NT$351 Mil.
Revenue was 1351.257 + 1597.597 + 1551.646 + 1545.919 = NT$6,046 Mil.
Gross Profit was 196.073 + 199.778 + 218.471 + 245.243 = NT$860 Mil.
Average Total Assets from the begining of this year (Dec24)
to the end of this year (Dec25) was
(11015.327 + 11626.415 + 11612.325 + 12069.712 + 12388.193) / 5 = NT$11742.3944 Mil.
Total Assets at the begining of this year (Dec24) was NT$11,015 Mil.
Long-Term Debt & Capital Lease Obligation was NT$3,864 Mil.
Total Current Assets was NT$5,631 Mil.
Total Current Liabilities was NT$2,588 Mil.
Net Income was -6.769 + 29.941 + -13.71 + 9.345 = NT$19 Mil.

Revenue was 1173.077 + 1338.299 + 1462.26 + 1518.742 = NT$5,492 Mil.
Gross Profit was 160.232 + 192.974 + 227.68 + 189.985 = NT$771 Mil.
Average Total Assets from the begining of last year (Dec23)
to the end of last year (Dec24) was
(7797.211 + 7977.866 + 9305.435 + 8483.999 + 11015.327) / 5 = NT$8915.9676 Mil.
Total Assets at the begining of last year (Dec23) was NT$7,797 Mil.
Long-Term Debt & Capital Lease Obligation was NT$3,194 Mil.
Total Current Assets was NT$5,656 Mil.
Total Current Liabilities was NT$2,005 Mil.

*Note: If the latest quarterly/semi-annual/annual total assets data is 0, then we will use previous quarterly/semi-annual/annual data for all the items in the balance sheet.

Profitability

Question 1. Return on Assets (ROA)

Net income before extraordinary items for the year divided by Total Assets at the beginning of the year.

Score 1 if positive, 0 if negative.

I-Chiun Precision Industry Co's current Net Income (TTM) was 51. ==> Positive ==> Score 1.

Question 2. Cash Flow Return on Assets (CFROA)

Net cash flow from operating activities (operating cash flow) divided by Total Assets at the beginning of the year.

Score 1 if positive, 0 if negative.

I-Chiun Precision Industry Co's current Cash Flow from Operations (TTM) was 351. ==> Positive ==> Score 1.

Question 3. Change in Return on Assets

Compare this year's return on assets (1) to last year's return on assets.

Score 1 if it's higher, 0 if it's lower.

ROA (This Year)=Net Income/Total Assets (Dec24)
=50.618/11015.327
=0.00459523

ROA (Last Year)=Net Income/Total Assets (Dec23)
=18.807/7797.211
=0.00241202

I-Chiun Precision Industry Co's return on assets of this year was 0.00459523. I-Chiun Precision Industry Co's return on assets of last year was 0.00241202. ==> This year is higher. ==> Score 1.

Question 4. Quality of Earnings (Accrual)

Compare Cash flow return on assets (2) to return on assets (1)

Score 1 if CFROA > ROA, 0 if CFROA <= ROA.

I-Chiun Precision Industry Co's current Net Income (TTM) was 51. I-Chiun Precision Industry Co's current Cash Flow from Operations (TTM) was 351. ==> 351 > 51 ==> CFROA > ROA ==> Score 1.

Funding

Question 5. Change in Gearing or Leverage

Compare this year's gearing (long-term debt divided by average total assets) to last year's gearing.

Score 0 if this year's gearing is higher, 1 otherwise.

Gearing (This Year: Dec25)=Long-Term Debt & Capital Lease Obligation/Average Total Assets from Dec24 to Dec25
=3864.438/11742.3944
=0.32910136

Gearing (Last Year: Dec24)=Long-Term Debt & Capital Lease Obligation/Average Total Assets from Dec23 to Dec24
=3193.647/8915.9676
=0.3581941

I-Chiun Precision Industry Co's gearing of this year was 0.32910136. I-Chiun Precision Industry Co's gearing of last year was 0.3581941. ==> This year is lower or equal to last year. ==> Score 1.

Question 6. Change in Working Capital (Liquidity)

Compare this year's current ratio (current assets divided by current liabilities) to last year's current ratio.

Score 1 if this year's current ratio is higher, 0 if it's lower

Current Ratio (This Year: Dec25)=Total Current Assets/Total Current Liabilities
=5630.982/2588.176
=2.17565652

Current Ratio (Last Year: Dec24)=Total Current Assets/Total Current Liabilities
=5655.836/2005.218
=2.82055916

I-Chiun Precision Industry Co's current ratio of this year was 2.17565652. I-Chiun Precision Industry Co's current ratio of last year was 2.82055916. ==> Last year's current ratio is higher ==> Score 0.

Question 7. Change in Shares in Issue

Compare the number of shares in issue this year, to the number in issue last year.

Score 0 if there is larger number of shares in issue this year, 1 otherwise.

I-Chiun Precision Industry Co's number of shares in issue this year was 232.25. I-Chiun Precision Industry Co's number of shares in issue last year was 234.131. ==> There is smaller number of shares in issue this year, or the same. ==> Score 1.

Efficiency

Question 8. Change in Gross Margin

Compare this year's gross margin (Gross Profit divided by sales) to last year's.

Score 1 if this year's gross margin is higher, 0 if it's lower.

Gross Margin (This Year: TTM)=Gross Profit/Revenue
=859.565/6046.419
=0.142161

Gross Margin (Last Year: TTM)=Gross Profit/Revenue
=770.871/5492.378
=0.14035287

I-Chiun Precision Industry Co's gross margin of this year was 0.142161. I-Chiun Precision Industry Co's gross margin of last year was 0.14035287. ==> This year's gross margin is higher. ==> Score 1.

Question 9. Change in asset turnover

Compare this year's asset turnover (total sales for the year divided by total assets at the beginning of the year) to last year's asset turnover ratio.

Score 1 if this year's asset turnover ratio is higher, 0 if it's lower

Asset Turnover (This Year)=Revenue/Total Assets at the Beginning of This Year (Dec24)
=6046.419/11015.327
=0.54890962

Asset Turnover (Last Year)=Revenue/Total Assets at the Beginning of Last Year (Dec23)
=5492.378/7797.211
=0.70440289

I-Chiun Precision Industry Co's asset turnover of this year was 0.54890962. I-Chiun Precision Industry Co's asset turnover of last year was 0.70440289. ==> Last year's asset turnover is higher ==> Score 0.

Evaluation

Piotroski F-Score= Que. 1+ Que. 2+ Que. 3+Que. 4+Que. 5+Que. 6+Que. 7+Que. 8+Que. 9
=1+1+1+1+1+0+1+1+0
=7

Good or high score = 7, 8, 9
Bad or low score = 0, 1, 2, 3

I-Chiun Precision Industry Co has an F-score of 7. It is a good or high score, which usually indicates a very healthy situation.

Frequently Asked Questions Learn more about Piotroski F-Score →
What does a Piotroski F-Score of 7 mean?
I-Chiun Precision Industry Co (TPE:2486) has a Piotroski F-Score of 7 as of Jul. 03, 2026. The Piotroski F-score grades a company's business operating strength from 0-9. View historical data on I-Chiun Precision Industry Co and its competitors. This is 17% above median its historical median of 6.00. Over the past decade, I-Chiun Precision Industry Co's Piotroski F-Score has ranged from 3.00 to 8.00. According to the industry distribution chart, I-Chiun Precision Industry Co ranks #219 out of 2428 companies in the Hardware industry, placing it in the top 9%.
Is I-Chiun Precision Industry Co's Piotroski F-Score too high?
I-Chiun Precision Industry Co's current Piotroski F-Score of 7 is 17% above median its 10-year median of 6.00. Over the past 10 years, this metric has ranged from a low of 3.00 to a high of 8.00. The Hardware industry median Piotroski F-Score is 5.00. I-Chiun Precision Industry Co's value of 7 is 40% above this industry median. Based on the distribution chart, I-Chiun Precision Industry Co ranks #219 out of 2428 companies in the Hardware industry, which is in the top quartile — a strong position relative to peers. Overall, I-Chiun Precision Industry Co has a GF Score™ of 51/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does I-Chiun Precision Industry Co's Piotroski F-Score compare to APH and GLW?
According to the Hardware industry distribution chart, I-Chiun Precision Industry Co ranks #219 out of 2428 companies for Piotroski F-Score. This places I-Chiun Precision Industry Co in the top 9% of its industry — outperforming the majority of peers. The industry median Piotroski F-Score is 5.00. I-Chiun Precision Industry Co's value of 7 is 40% above this benchmark. Historically, I-Chiun Precision Industry Co's own Piotroski F-Score has ranged from 3.00 to 8.00 over the past decade. While the company's 10-year median is 6.00 vs. the industry median of 5.00, I-Chiun Precision Industry Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Piotroski F-Score for a Hardware company?
The median Piotroski F-Score among Hardware companies is 5.00, based on 2,428 companies in the industry. Companies in the top quartile (top 25%) have a Piotroski F-Score significantly above this median, while those in the bottom quartile fall well below. However, Piotroski F-Score should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. I-Chiun Precision Industry Co's current Piotroski F-Score of 7 is 40% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Piotroski F-Score mean?
A high Piotroski F-Score can signal that a stock is expensive relative to its fundamentals. The Piotroski F-score grades a company's business operating strength from 0-9. View historical data on I-Chiun Precision Industry Co and its competitors. For the Hardware industry, the median Piotroski F-Score is 5.00 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. I-Chiun Precision Industry Co's current Piotroski F-Score is 7, which is 17% above median its own 10-year median of 6.00. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is I-Chiun Precision Industry Co stock overvalued right now?
Based on GuruFocus' analysis, I-Chiun Precision Industry Co (TPE:2486) is currently considered Significantly Overvalued. The stock's GF Value™ is NT$82.48, compared to a current price of NT$254.00 — trading 208% above its estimated fair value. The current Piotroski F-Score is 7, which is 17% above median its 10-year median of 6.00 and 40% above the Hardware industry median of 5.00. I-Chiun Precision Industry Co's overall GF Score™ is 51/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Piotroski F-Score calculated?
Piotroski F-Score is calculated from a company's financial statements. For I-Chiun Precision Industry Co (TPE:2486), the current Piotroski F-Score is 7 as of Jul. 03, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.

Is I-Chiun Precision Industry Co (TPE:2486) Overvalued in 2026?

Based on GuruFocus' analysis, I-Chiun Precision Industry Co stock appears to be overvalued. The current stock price of NT$254.00 is trading 208% above its estimated GF Value™ of NT$82.48. GuruFocus considers I-Chiun Precision Industry Co to be Significantly Overvalued.

Key valuation signals for TPE:2486:

  • Piotroski F-Score: 7 (17% above median its 10-year median of 6.00)
  • GF Value™: NT$82.48 vs. price of NT$254.00 (208% above fair value)
  • GF Score™: 51/100 with 5 warning signs
  • Industry Position: 40% above the Hardware median (#219 of 2428)

No single metric tells the full story. See the TPE:2486 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.


I-Chiun Precision Industry Co Business Description

Address No. 28, Xinzhi 8th Road, Xinzhuang District, New Taipei, TWN, 24890
I-Chiun Precision Industry Co Ltd is mainly engaged in the manufacturing, processing, and trading of machinery and parts, electronic parts, parts for appliances, semiconductor LED lead frames, precision molds, etc., as well as relevant import and export trade, and real estate leasing business. The Geographical presence of the company in China, Taiwan, and Other countries. The majority of its revenue is generated from China.
51GF Score

Get the complete analysis for TPE:2486

Piotroski F-Score is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.

NT$254.00
Price
NT$82.48
GF Value