Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Mold-Tek TechnologiesNSE:MOLDTECH -3.20%84 EV-to-EBITDA is 15.63 as of Aug. 17, 2026, which is 30% above its 10-year median of 12.05. GuruFocus rates NSE:MOLDTECH with a GF Score™ of 84/100 and a GF Value™ of ₹243.28 (Modestly Undervalued). The stock has 4 warning signs investors should review. Among 1,485 Construction companies, Mold-Tek Technologies ranks worse than 85.72% on this metric.
EV-to-EBITDA is calculated as enterprise value divided by its EBITDA. As of today, Mold-Tek Technologies's enterprise value is ₹4,862 Mil.
Mold-Tek Technologies's EBITDA for the trailing twelve months (TTM) ended in Jun. 2026 was ₹311 Mil. Therefore, Mold-Tek Technologies's EV-to-EBITDA for today is 15.63.
The historical rank and industry rank for Mold-Tek Technologies's EV-to-EBITDA or its related term are showing as below:
NSE:MOLDTECH'
s EV-to-EBITDA Range Over the Past 10 Years
Min: 4.03 Med: 12.05 Max: 56.33
Current: 24.75
During the past 13 years, the highest EV-to-EBITDA of Mold-Tek Technologies was 56.33. The lowest was 4.03. And the median was 12.05.
NSE:MOLDTECH's EV-to-EBITDA is ranked worse than 85.72% of 1485
companies
in the Construction industry
Industry Median: 8.89
vs NSE:MOLDTECH: 24.75
EV-to-EBITDA is a valuation multiple used in finance and investment to measure the value of a company. This important multiple is often used in conjunction with, or as an alternative to, the PE Ratio to determine the fair market value of a company.
EV-to-EBITDA is a valuation multiple used in finance and investment to measure the value of a company. This important multiple is often used in conjunction with, or as an alternative to, the PE Ratio (TTM) to determine the fair market value of a company.
Mold-Tek Technologies's PE Ratio (TTM) for today is calculated as:
Mold-Tek Technologies's share price for today is ₹179.60.
Mold-Tek Technologies's Earnings per Share (Diluted) for the trailing twelve months (TTM) ended in Jun. 2026 adds up the quarterly data reported by the company within the most recent 12 months, which was ₹6.400.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Study has found that the companies with the lowest EV-to-EBITDA outperforms companies measured as cheap by other ratios such as PE Ratio (TTM).
Mold-Tek Technologies EV-to-EBITDA Historical Data
* Premium members only.
The historical data trend for Mold-Tek Technologies's EV-to-EBITDA can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
NSE:MOLDTECH vs PWR, FIX, EME: EV-to-EBITDA Comparison
For the Engineering & Construction subindustry, Mold-Tek Technologies's EV-to-EBITDA, along with its competitors' market caps and EV-to-EBITDA data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Mold-Tek Technologies EV-to-EBITDA vs Construction Industry
For the Construction industry and Industrials sector, Mold-Tek Technologies's EV-to-EBITDA distribution charts can be found below:
* The bar in red indicates where Mold-Tek Technologies's EV-to-EBITDA falls into.
Mold-Tek Technologies's current Enterprise Value is ₹4,862 Mil.
Mold-Tek Technologies's EBITDA for the trailing twelve months (TTM) ended in Jun. 2026 adds up the quarterly data reported by the company within the most recent 12 months, which was ₹311 Mil.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Mold-Tek Technologies (NSE:MOLDTECH) has a EV-to-EBITDA of 15.63 as of Aug. 17, 2026. EV to EBITDA ratio is the company's enterprise value divided by earnings before interest, taxes, depreciation and amortization. View historical data on Mold-Tek Technologies. This is 30% above median its historical median of 12.05. Over the past decade, Mold-Tek Technologies' EV-to-EBITDA has ranged from 4.03 to 56.33. According to the industry distribution chart, Mold-Tek Technologies ranks #1273 out of 1485 companies in the Construction industry, placing it in the top 85.7%.
Is Mold-Tek Technologies' EV-to-EBITDA too high?
Mold-Tek Technologies' current EV-to-EBITDA of 15.63 is 30% above median its 10-year median of 12.05. Over the past 10 years, this metric has ranged from a low of 4.03 to a high of 56.33. The Construction industry median EV-to-EBITDA is 8.89. Mold-Tek Technologies' value of 15.63 is 75.8% above this industry median. Based on the distribution chart, Mold-Tek Technologies ranks #1273 out of 1485 companies in the Construction industry, which is in the bottom quartile relative to peers. Overall, Mold-Tek Technologies has a GF Score™ of 84/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Mold-Tek Technologies' EV-to-EBITDA compare to PWR and FIX?
According to the Construction industry distribution chart, Mold-Tek Technologies ranks #1273 out of 1485 companies for EV-to-EBITDA. This places Mold-Tek Technologies in the lower half of its industry. The industry median EV-to-EBITDA is 8.89. Mold-Tek Technologies' value of 15.63 is 75.8% above this benchmark. Historically, Mold-Tek Technologies' own EV-to-EBITDA has ranged from 4.03 to 56.33 over the past decade. While the company's 10-year median is 12.05 vs. the industry median of 8.89, Mold-Tek Technologies has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EV-to-EBITDA for a Construction company?
The median EV-to-EBITDA among Construction companies is 8.89, based on 1,485 companies in the industry. Companies in the top quartile (top 25%) have a EV-to-EBITDA significantly above this median, while those in the bottom quartile fall well below. However, EV-to-EBITDA should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Mold-Tek Technologies's current EV-to-EBITDA of 15.63 is 75.8% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EV-to-EBITDA mean?
A high EV-to-EBITDA can signal that a stock is expensive relative to its fundamentals. EV to EBITDA ratio is the company's enterprise value divided by earnings before interest, taxes, depreciation and amortization. View historical data on Mold-Tek Technologies. For the Construction industry, the median EV-to-EBITDA is 8.89 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Mold-Tek Technologies's current EV-to-EBITDA is 15.63, which is 30% above median its own 10-year median of 12.05. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Mold-Tek Technologies stock overvalued right now?
Based on GuruFocus' analysis, Mold-Tek Technologies (NSE:MOLDTECH) is currently considered Modestly Undervalued. The stock's GF Value™ is ₹243.28, compared to a current price of ₹179.60 — trading 26.2% below its estimated fair value. The current EV-to-EBITDA is 15.63, which is 30% above median its 10-year median of 12.05 and 75.8% above the Construction industry median of 8.89. Mold-Tek Technologies' overall GF Score™ is 84/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EV-to-EBITDA calculated?
EV-to-EBITDA is calculated from a company's financial statements. For Mold-Tek Technologies (NSE:MOLDTECH), the current EV-to-EBITDA is 15.63 as of Aug. 17, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Mold-Tek Technologies (NSE:MOLDTECH) Overvalued in 2026?
Based on GuruFocus' analysis, Mold-Tek Technologies stock appears to be undervalued.
The current stock price of ₹179.60 is trading 26.2% below its estimated GF Value™ of ₹243.28.
GuruFocus considers Mold-Tek Technologies to be Modestly Undervalued.
Key valuation signals for NSE:MOLDTECH:
EV-to-EBITDA: 15.63 (30% above median its 10-year median of 12.05)
GF Value™: ₹243.28 vs. price of ₹179.60 (26.2% below fair value)
Industry Position: 75.8% above the Construction median (#1273 of 1485)
No single metric tells the full story. See the NSE:MOLDTECH stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Mold-Tek Technologies Ltd is an engineering and technology solutions provider company in India. It provides Structural Engineering and Detailing, Mechanical Engineering Services, and Information Technology Services. It operates through one segment, Engineering Services, and generates the majority of its revenue from the provision of structural engineering services.
84GF Score
Get the complete analysis for NSE:MOLDTECH
EV-to-EBITDA is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NSE:MOLDTECH has been successfully added to your 
