EV-to-FCF is calculated as enterprise value divided by its free cash flow. As of today, Tong-Tai Machine Tool Co's Enterprise Value is NT$13,633 Mil.
Tong-Tai Machine Tool Co's Free Cash Flow for the trailing twelve months (TTM) ended in Dec. 2025 was NT$-1,127 Mil. Therefore, Tong-Tai Machine Tool Co's EV-to-FCF for today is -12.10.
The historical rank and industry rank for Tong-Tai Machine Tool Co's EV-to-FCF or its related term are showing as below:
TPE:4526'
s EV-to-FCF Range Over the Past 10 Years
Min: -462.38 Med: 9.64 Max: 1069.09
Current: -12.66
During the past 13 years, the highest EV-to-FCF of Tong-Tai Machine Tool Co was 1069.09. The lowest was -462.38. And the median was 9.64.
TPE:4526's EV-to-FCF is ranked worse than 100% of 1728
companies
in the Industrial Products industry
Industry Median: 26.445
vs TPE:4526: -12.66
EV-to-FCF is a valuation multiple that allows analysts and investors to compare stocks, preferably in the same sector or industry. This important multiple is often used in conjunction with, or as an alternative to, the PE Ratio (TTM) to determine the fair market value of a company.
Tong-Tai Machine Tool Co (TPE:4526) EV-to-FCF Explanation
EV-to-FCF is a valuation multiple that allows analysts and investors to compare stocks, preferably in the same sector or industry. This important multiple is often used in conjunction with, or as an alternative to, the PE Ratio (TTM) to determine the fair market value of a company.
Tong-Tai Machine Tool Co's PE Ratio (TTM) for today is calculated as:
Tong-Tai Machine Tool Co's share price for today is NT$39.00.
Tong-Tai Machine Tool Co's Earnings per Share (Diluted) for the trailing twelve months (TTM) ended in Dec. 2025 adds up the quarterly data reported by the company within the most recent 12 months, which was NT$1.810.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Enterprise Value is used because it is a more complete measure in reflecting how much an investor pays when buying a company. Free Cash Flow is an important financial metric because it represents the actual amount of cash at a company's disposal. Companies with a low EV-to-FCF ratio, combined with a strong balance sheet are generally considered as undervalued.
Tong-Tai Machine Tool Co EV-to-FCF Related Terms
Tong-Tai Machine Tool Co EV-to-FCF Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Specialty Industrial Machinery subindustry, Tong-Tai Machine Tool Co's EV-to-FCF, along with its competitors' market caps and EV-to-FCF data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Tong-Tai Machine Tool Co EV-to-FCF vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Tong-Tai Machine Tool Co's EV-to-FCF distribution charts can be found below:
* The bar in red indicates where Tong-Tai Machine Tool Co's EV-to-FCF falls into.
Tong-Tai Machine Tool Co's current Enterprise Value is NT$13,633 Mil.
Tong-Tai Machine Tool Co's Free Cash Flow for the trailing twelve months (TTM) ended in Dec. 2025 adds up the quarterly data reported by the company within the most recent 12 months, which was NT$-1,127 Mil.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Tong-Tai Machine Tool Co (TPE:4526) has a EV-to-FCF of -12.10 as of Jul. 08, 2026. EV to FCF ratio is the company's enterprise value divided by free cash flow. View historical data on Tong-Tai Machine Tool Co and its competitors. According to the industry distribution chart, Tong-Tai Machine Tool Co ranks #999999 out of 1728 companies in the Industrial Products industry.
Is Tong-Tai Machine Tool Co's EV-to-FCF too high?
Tong-Tai Machine Tool Co's current EV-to-FCF is -12.10. Based on the distribution chart, Tong-Tai Machine Tool Co ranks #999999 out of 1728 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, Tong-Tai Machine Tool Co has a GF Score™ of 50/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Tong-Tai Machine Tool Co's EV-to-FCF compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Tong-Tai Machine Tool Co ranks #999999 out of 1728 companies for EV-to-FCF. This places Tong-Tai Machine Tool Co in the lower half of its industry. The industry median EV-to-FCF is 26.45. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EV-to-FCF for an Industrial Products company?
The median EV-to-FCF among Industrial Products companies is 26.45, based on 1,728 companies in the industry. Companies in the top quartile (top 25%) have a EV-to-FCF significantly above this median, while those in the bottom quartile fall well below. However, EV-to-FCF should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EV-to-FCF mean?
A high EV-to-FCF can signal that a stock is expensive relative to its fundamentals. EV to FCF ratio is the company's enterprise value divided by free cash flow. View historical data on Tong-Tai Machine Tool Co and its competitors. For the Industrial Products industry, the median EV-to-FCF is 26.45 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Tong-Tai Machine Tool Co's current EV-to-FCF is -12.10. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Tong-Tai Machine Tool Co stock overvalued right now?
Based on GuruFocus' analysis, Tong-Tai Machine Tool Co (TPE:4526) is currently considered Significantly Overvalued. The stock's GF Value™ is NT$20.28, compared to a current price of NT$39.00 — trading 92.3% above its estimated fair value. The current EV-to-FCF is -12.10. Tong-Tai Machine Tool Co's overall GF Score™ is 50/100 with 7 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EV-to-FCF calculated?
EV-to-FCF is calculated from a company's financial statements. For Tong-Tai Machine Tool Co (TPE:4526), the current EV-to-FCF is -12.10 as of Jul. 08, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Tong-Tai Machine Tool Co (TPE:4526) Overvalued in 2026?
Based on GuruFocus' analysis, Tong-Tai Machine Tool Co stock appears to be overvalued.
The current stock price of NT$39.00 is trading 92.3% above its estimated GF Value™ of NT$20.28.
GuruFocus considers Tong-Tai Machine Tool Co to be Significantly Overvalued.
Key valuation signals for TPE:4526:
EV-to-FCF: -12.10
GF Value™: NT$20.28 vs. price of NT$39.00 (92.3% above fair value)
No single metric tells the full story. See the TPE:4526 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Tong-Tai Machine Tool Co Ltd is engaged in the manufacturing and selling of machines and selling of machine tools, computer components, computer numerical control lathes, and cutting centers. Its products line includes machine tools, such as vertical machining, 5-axis machining, tapping, horizontal machining, 5-axis horizontal machining, multi-tasking turning, and ultrasonic-assisted machining centers, as well as boring and milling machines, horizontal and vertical CNC lathes, and wheel machines; and PCB machines, comprising drilling and routing machines. The company operates in various geographical areas including Taiwan, China, Europe, Asia, and others. The company has three segments: Machine Manufacturer, which derives key revenue; Component Manufacturer and Others.
50GF Score
Get the complete analysis for TPE:4526
EV-to-FCF is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:4526 has been successfully added to your 
