Thrace Plastics Holding and Commercial (ATH:PLAT) Forward PE Ratio Explanation
The Forward PE Ratio of a company is often used to compare current earnings to estimated future earnings, as well as gaining a clearer picture of what earnings will look like without charges and other accounting adjustments. If earnings are expected to grow in the future, the Forward PE Ratio will be lower than the current PE Ratio. This measure is also used to compare one company to another with a forward-looking focus.
Trailing PE Ratio relies on what is already done. It uses the current share price and divides by the total EPS (Basic) over the past 12 months. PE Ratio can be affected by Non Operating Income such as the sale of part of businesses. This may increase for the current year or quarter dramatically. But it cannot be repeated over and over. Therefore PE Ratio without NRI is a more accurate indication of valuation than PE Ratio .
Thrace Plastics Holding and Commercial Forward PE Ratio Related Terms
Thrace Plastics Holding and Commercial Forward PE Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Thrace Plastics Holding and Commercial Forward PE Ratio Chart
Thrace Plastics Holding and Commercial Annual Data
Trend
2019-12
2020-12
2021-12
2022-12
2024-12
2025-12
Forward PE Ratio
8.53
6.37
11.66
6.05
9.73
12.55
Thrace Plastics Holding and Commercial Quarterly Data
2019-06
2019-09
2019-12
2020-03
2020-06
2020-12
2021-03
2021-06
2021-09
2021-12
2022-03
2022-06
2022-09
2022-12
2023-03
2023-06
2023-09
2024-12
2025-03
2025-06
2025-09
2025-12
2026-03
Forward PE Ratio
9.72
9.03
8.53
5.49
7.63
6.37
4.60
5.01
13.18
11.66
8.56
6.04
5.53
6.05
6.18
14.45
9.03
9.73
10.24
9.49
12.64
12.55
11.25
ATH:PLAT vs AIN: Forward PE Ratio Comparison
For the Textile Manufacturing subindustry, Thrace Plastics Holding and Commercial's Forward PE Ratio, along with its competitors' market caps and Forward PE Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Thrace Plastics Holding and Commercial Forward PE Ratio vs Manufacturing - Apparel & Accessories Industry
For the Manufacturing - Apparel & Accessories industry and Consumer Cyclical sector, Thrace Plastics Holding and Commercial's Forward PE Ratio distribution charts can be found below:
* The bar in red indicates where Thrace Plastics Holding and Commercial's Forward PE Ratio falls into.
Thrace Plastics Holding and Commercial Forward PE Ratio Calculation
It's a measure of the price-to-earnings ratio (PE Ratio) using forecasted earnings for the calculation. While the earnings used are just an estimate and are not as reliable as current earnings data, there is still benefit in estimated P/E analysis. The forecasted earnings used in the formula can either be for the next 12 months or for the next full-year fiscal period.
Thrace Plastics Holding and Commercial (ATH:PLAT) has a Forward PE Ratio of 14.88 as of Jul. 09, 2026. Forward P/E ratio is the share price dividend by the expected per-share earnings in the next 12 months. View historical data on Thrace Plastics Holding and Commercial and its competitors. According to the industry distribution chart, Thrace Plastics Holding and Commercial ranks #142 out of 244 companies in the Manufacturing - Apparel & Accessories industry, placing it in the top 58.2%.
Is Thrace Plastics Holding and Commercial's Forward PE Ratio too high?
Thrace Plastics Holding and Commercial's current Forward PE Ratio is 14.88. The Manufacturing - Apparel & Accessories industry median Forward PE Ratio is 13.40. Thrace Plastics Holding and Commercial's value of 14.88 is 11.1% above this industry median. Based on the distribution chart, Thrace Plastics Holding and Commercial ranks #142 out of 244 companies in the Manufacturing - Apparel & Accessories industry, which is below the industry midpoint. Overall, Thrace Plastics Holding and Commercial has a GF Score™ of 77/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Thrace Plastics Holding and Commercial's Forward PE Ratio compare to AIN?
According to the Manufacturing - Apparel & Accessories industry distribution chart, Thrace Plastics Holding and Commercial ranks #142 out of 244 companies for Forward PE Ratio. This places Thrace Plastics Holding and Commercial in the lower half of its industry. The industry median Forward PE Ratio is 13.40. Thrace Plastics Holding and Commercial's value of 14.88 is 11.1% above this benchmark. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Forward PE Ratio for a Manufacturing - Apparel & Accessories company?
The median Forward PE Ratio among Manufacturing - Apparel & Accessories companies is 13.40, based on 244 companies in the industry. Companies in the top quartile (top 25%) have a Forward PE Ratio significantly above this median, while those in the bottom quartile fall well below. However, Forward PE Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Thrace Plastics Holding and Commercial's current Forward PE Ratio of 14.88 is 11.1% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Forward PE Ratio mean?
A high Forward PE Ratio can signal that a stock is expensive relative to its fundamentals. Forward P/E ratio is the share price dividend by the expected per-share earnings in the next 12 months. View historical data on Thrace Plastics Holding and Commercial and its competitors. For the Manufacturing - Apparel & Accessories industry, the median Forward PE Ratio is 13.40 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Thrace Plastics Holding and Commercial's current Forward PE Ratio is 14.88. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Thrace Plastics Holding and Commercial stock overvalued right now?
Based on GuruFocus' analysis, Thrace Plastics Holding and Commercial (ATH:PLAT) is currently considered Fairly Valued. The stock's GF Value™ is €4.46, compared to a current price of €4.87 — trading 9.1% above its estimated fair value. The current Forward PE Ratio is 14.88 and 11.1% above the Manufacturing - Apparel & Accessories industry median of 13.40. Thrace Plastics Holding and Commercial's overall GF Score™ is 77/100 with 8 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Forward PE Ratio calculated?
Forward PE Ratio is calculated from a company's financial statements. For Thrace Plastics Holding and Commercial (ATH:PLAT), the current Forward PE Ratio is 14.88 as of Jul. 09, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Thrace Plastics Holding and Commercial (ATH:PLAT) Overvalued in 2026?
Based on GuruFocus' analysis, Thrace Plastics Holding and Commercial stock appears to be overvalued.
The current stock price of €4.87 is trading 9.1% above its estimated GF Value™ of €4.46.
GuruFocus considers Thrace Plastics Holding and Commercial to be Fairly Valued.
Key valuation signals for ATH:PLAT:
Forward PE Ratio: 14.88
GF Value™: €4.46 vs. price of €4.87 (9.1% above fair value)
Industry Position: 11.1% above the Manufacturing - Apparel & Accessories median (#142 of 244)
No single metric tells the full story. See the ATH:PLAT stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Thrace Plastics Holding and Commercial Business Description
Thrace Plastics Holding and Commercial SA are engaged in the production and distribution of polypropylene products. The business segments of the company are the technical fabrics sector which is concerned with the production and trade of synthetic fabrics for industrial and technical uses; packaging sector which is concerned with production and trade of industrial products, including mainly bags and palletizing film for the packaging of fertilizers, fish feed, animal feed and chemical and inert materials; and Other, that includes agriculture sector. Geographically, the company generates majority of its revenue from European Union Countries.
77GF Score
Get the complete analysis for ATH:PLAT
Forward PE Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ATH:PLAT has been successfully added to your 