Thrace Plastics Holding and Commercial has a quick ratio of 0.94. It indicates that the company cannot currently fully pay back its current liabilities.
Thrace Plastics Holding and Commercial (ATH:PLAT) Quick Ratio Explanation
The quick ratio is more conservative than the Current Ratio because it excludes inventories from current assets. The ratio derives its name presumably from the fact that assets such as cash and marketable securities are quick sources of cash. Inventories generally take time to be converted into cash, and if they have to be sold quickly, the company may have to accept a lower price than book value of these inventories. As a result, they are justifiably excluded from assets that are ready sources of immediate cash.
In general, low or decreasing quick ratios generally suggest that a company is over-leveraged, struggling to maintain or grow sales, paying bills too quickly or collecting receivables too slowly. On the other hand, a high or increasing quick ratio generally indicates that a company is experiencing solid top-line growth, quickly converting receivables into cash, and easily able to cover its financial obligations. Such companies often have faster inventory turnover and cash conversion cycles.
The higher the quick ratio, the better the company's liquidity position.
Thrace Plastics Holding and Commercial Quick Ratio Related Terms
Thrace Plastics Holding and Commercial Quick Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Thrace Plastics Holding and Commercial Quick Ratio Chart
Thrace Plastics Holding and Commercial Annual Data
For the Textile Manufacturing subindustry, Thrace Plastics Holding and Commercial's Quick Ratio, along with its competitors' market caps and Quick Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Thrace Plastics Holding and Commercial Quick Ratio vs Manufacturing - Apparel & Accessories Industry
For the Manufacturing - Apparel & Accessories industry and Consumer Cyclical sector, Thrace Plastics Holding and Commercial's Quick Ratio distribution charts can be found below:
* The bar in red indicates where Thrace Plastics Holding and Commercial's Quick Ratio falls into.
Thrace Plastics Holding and Commercial Quick Ratio Calculation
The quick ratio measures a company's ability to meet its short-term obligations with its most liquid assets. For this reason, the ratio excludes inventories from current assets.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Thrace Plastics Holding and Commercial (ATH:PLAT) has a Quick Ratio of 0.94 as of Mar. 2026. Quick ratio is the ratio of current assets less inventory to current liabilities. View historical data on Thrace Plastics Holding and Commercial and its competitors. This is near median its historical median of 1.00. Over the past decade, Thrace Plastics Holding and Commercial's Quick Ratio has ranged from 0.66 to 1.43. According to the industry distribution chart, Thrace Plastics Holding and Commercial ranks #609 out of 1068 companies in the Manufacturing - Apparel & Accessories industry, placing it in the top 57%.
Is Thrace Plastics Holding and Commercial's Quick Ratio too high?
Thrace Plastics Holding and Commercial's current Quick Ratio of 0.94 is near median its 10-year median of 1.00. Over the past 10 years, this metric has ranged from a low of 0.66 to a high of 1.43. The Manufacturing - Apparel & Accessories industry median Quick Ratio is 1.10. Thrace Plastics Holding and Commercial's value of 0.94 is 14.5% below this industry median. Based on the distribution chart, Thrace Plastics Holding and Commercial ranks #609 out of 1068 companies in the Manufacturing - Apparel & Accessories industry, which is below the industry midpoint. Overall, Thrace Plastics Holding and Commercial has a GF Score™ of 78/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Thrace Plastics Holding and Commercial's Quick Ratio compare to AIN?
According to the Manufacturing - Apparel & Accessories industry distribution chart, Thrace Plastics Holding and Commercial ranks #609 out of 1068 companies for Quick Ratio. This places Thrace Plastics Holding and Commercial in the lower half of its industry. The industry median Quick Ratio is 1.10. Thrace Plastics Holding and Commercial's value of 0.94 is 14.5% below this benchmark. Historically, Thrace Plastics Holding and Commercial's own Quick Ratio has ranged from 0.66 to 1.43 over the past decade. While the company's 10-year median is 1.00 vs. the industry median of 1.10, Thrace Plastics Holding and Commercial has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Quick Ratio for a Manufacturing - Apparel & Accessories company?
The median Quick Ratio among Manufacturing - Apparel & Accessories companies is 1.10, based on 1,068 companies in the industry. Companies in the top quartile (top 25%) have a Quick Ratio significantly above this median, while those in the bottom quartile fall well below. However, Quick Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Thrace Plastics Holding and Commercial's current Quick Ratio of 0.94 is 14.5% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Quick Ratio mean?
A high Quick Ratio can signal that a stock is expensive relative to its fundamentals. Quick ratio is the ratio of current assets less inventory to current liabilities. View historical data on Thrace Plastics Holding and Commercial and its competitors. For the Manufacturing - Apparel & Accessories industry, the median Quick Ratio is 1.10 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Thrace Plastics Holding and Commercial's current Quick Ratio is 0.94, which is near median its own 10-year median of 1.00. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Thrace Plastics Holding and Commercial stock overvalued right now?
Based on GuruFocus' analysis, Thrace Plastics Holding and Commercial (ATH:PLAT) is currently considered Fairly Valued. The stock's GF Value™ is €4.44, compared to a current price of €4.64 — trading 4.5% above its estimated fair value. The current Quick Ratio is 0.94, which is near median its 10-year median of 1.00 and 14.5% below the Manufacturing - Apparel & Accessories industry median of 1.10. Thrace Plastics Holding and Commercial's overall GF Score™ is 78/100 with 11 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Quick Ratio calculated?
Quick Ratio is calculated from a company's financial statements. For Thrace Plastics Holding and Commercial (ATH:PLAT), the current Quick Ratio is 0.94 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Thrace Plastics Holding and Commercial (ATH:PLAT) Overvalued in 2026?
Based on GuruFocus' analysis, Thrace Plastics Holding and Commercial stock appears to be overvalued.
The current stock price of €4.64 is trading 4.5% above its estimated GF Value™ of €4.44.
GuruFocus considers Thrace Plastics Holding and Commercial to be Fairly Valued.
Key valuation signals for ATH:PLAT:
Quick Ratio: 0.94 (near median its 10-year median of 1.00)
GF Value™: €4.44 vs. price of €4.64 (4.5% above fair value)
Industry Position: 14.5% below the Manufacturing - Apparel & Accessories median (#609 of 1068)
No single metric tells the full story. See the ATH:PLAT stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Thrace Plastics Holding and Commercial Business Description
Thrace Plastics Holding and Commercial SA are engaged in the production and distribution of polypropylene products. The business segments of the company are the technical fabrics sector which is concerned with the production and trade of synthetic fabrics for industrial and technical uses; packaging sector which is concerned with production and trade of industrial products, including mainly bags and palletizing film for the packaging of fertilizers, fish feed, animal feed and chemical and inert materials; and Other, that includes agriculture sector. Geographically, the company generates majority of its revenue from European Union Countries.
78GF Score
Get the complete analysis for ATH:PLAT
Quick Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ATH:PLAT has been successfully added to your 
