SuperAlloy Industrial CoTPE:1563 -0.70%59 Operating Margin % is 3.34% as of Dec. 2025, which is 70% below its 10-year median of 11.05. GuruFocus rates TPE:1563 with a GF Score™ of 59/100 and a GF Value™ of NT$59.42 (Modestly Overvalued). The stock has 10 warning signs investors should review. Among 1,322 Vehicles & Parts companies, SuperAlloy Industrial Co ranks better than 70.12% on this metric.
SuperAlloy Industrial Co (TPE:1563) Operating Margin % Explanation
Just like Gross Margin %, it is important to see a company maintains its operating margin over time. Among the same industry, a company with higher operating margin is more efficient in its operation. It is also more stable during industry slowdown or recessions. Peter Lynch prefers those with higher margins than those with lower margins.
Be Aware
Operating Margin % can be manipulated by adjusting the rate of depreciation, depletion and amortization (DDA).
If a company is facing competition, its Operating Margin % may decline. Often the Operating Margin % declines well before the company's Revenue or even profit decline. Therefore, Operating Margin % is a very important indicator of whether the company is facing problems.
For instance, by 2012, Nokia (NOK)'s problems were well known and its stock had lost more than 90% of its market value since 2007. But Nokias Operating Margin % had already been in decline since 2002, although its Earnings per Share (Diluted) were still rising. Investors who paid attention to Operating Margin % would have avoided this huge loss. The same can be said for Research-in-Motion (RIMM).
Therefore, Operating Margin % is a very important screening filter for GuruFocus. GuruFocus's Buffett-Munger screener requires that the profit margin is either consistent or expanding. The Model Portfolio of the Buffett-Munger screener has outperformed the market every year since inception in 2009.
SuperAlloy Industrial Co Operating Margin % Related Terms
SuperAlloy Industrial Co Operating Margin % Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
TPE:1563 vs ORLY, AZO: Operating Margin % Comparison
For the Auto Parts subindustry, SuperAlloy Industrial Co's Operating Margin %, along with its competitors' market caps and Operating Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
SuperAlloy Industrial Co Operating Margin % vs Vehicles & Parts Industry
For the Vehicles & Parts industry and Consumer Cyclical sector, SuperAlloy Industrial Co's Operating Margin % distribution charts can be found below:
* The bar in red indicates where SuperAlloy Industrial Co's Operating Margin % falls into.
SuperAlloy Industrial Co Operating Margin % Calculation
Operating Margin % - also known as operating income margin, operating profit margin and return on sales (ROS) - is the ratio of Operating Income divided by net sales or Revenue, usually presented in percent.
SuperAlloy Industrial Co's Operating Margin % for the fiscal year that ended in Dec. 2025 is calculated as
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
SuperAlloy Industrial Co (TPE:1563) has a Operating Margin % of 3.34% as of Dec. 2025. Operating margin is the ratio of total operating income to net sales. View historical data on SuperAlloy Industrial Co and its competitors. This is 70% below median its historical median of 11.05. Over the past decade, SuperAlloy Industrial Co's Operating Margin % has ranged from 1.95 to 25.76. According to the industry distribution chart, SuperAlloy Industrial Co ranks #395 out of 1322 companies in the Vehicles & Parts industry, placing it in the top 29.9%.
Is SuperAlloy Industrial Co's Operating Margin % too high?
SuperAlloy Industrial Co's current Operating Margin % of 3.34% is 70% below median its 10-year median of 11.05. Over the past 10 years, this metric has ranged from a low of 1.95 to a high of 25.76. The Vehicles & Parts industry median Operating Margin % is 4.88. SuperAlloy Industrial Co's value of 3.34% is 31.6% below this industry median. Based on the distribution chart, SuperAlloy Industrial Co ranks #395 out of 1322 companies in the Vehicles & Parts industry, which is above the industry midpoint. Overall, SuperAlloy Industrial Co has a GF Score™ of 59/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does SuperAlloy Industrial Co's Operating Margin % compare to ORLY and AZO?
According to the Vehicles & Parts industry distribution chart, SuperAlloy Industrial Co ranks #395 out of 1322 companies for Operating Margin %. This puts SuperAlloy Industrial Co in the upper half of its industry. The industry median Operating Margin % is 4.88. SuperAlloy Industrial Co's value of 3.34% is 31.6% below this benchmark. Historically, SuperAlloy Industrial Co's own Operating Margin % has ranged from 1.95 to 25.76 over the past decade. While the company's 10-year median is 11.05 vs. the industry median of 4.88, SuperAlloy Industrial Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Operating Margin % for a Vehicles & Parts company?
The median Operating Margin % among Vehicles & Parts companies is 4.88, based on 1,322 companies in the industry. Companies in the top quartile (top 25%) have a Operating Margin % significantly above this median, while those in the bottom quartile fall well below. However, Operating Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. SuperAlloy Industrial Co's current Operating Margin % of 3.34% is 31.6% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Operating Margin % mean?
A high Operating Margin % can signal that a stock is expensive relative to its fundamentals. Operating margin is the ratio of total operating income to net sales. View historical data on SuperAlloy Industrial Co and its competitors. For the Vehicles & Parts industry, the median Operating Margin % is 4.88 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. SuperAlloy Industrial Co's current Operating Margin % is 3.34%, which is 70% below median its own 10-year median of 11.05. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is SuperAlloy Industrial Co stock overvalued right now?
Based on GuruFocus' analysis, SuperAlloy Industrial Co (TPE:1563) is currently considered Modestly Overvalued. The stock's GF Value™ is NT$59.42, compared to a current price of NT$70.50 — trading 18.6% above its estimated fair value. The current Operating Margin % is 3.34%, which is 70% below median its 10-year median of 11.05 and 31.6% below the Vehicles & Parts industry median of 4.88. SuperAlloy Industrial Co's overall GF Score™ is 59/100 with 10 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Operating Margin % calculated?
Operating Margin % is calculated from a company's financial statements. For SuperAlloy Industrial Co (TPE:1563), the current Operating Margin % is 3.34% as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is SuperAlloy Industrial Co (TPE:1563) Overvalued in 2026?
Based on GuruFocus' analysis, SuperAlloy Industrial Co stock appears to be overvalued.
The current stock price of NT$70.50 is trading 18.6% above its estimated GF Value™ of NT$59.42.
GuruFocus considers SuperAlloy Industrial Co to be Modestly Overvalued.
Key valuation signals for TPE:1563:
Operating Margin %: 3.34% (70% below median its 10-year median of 11.05)
GF Value™: NT$59.42 vs. price of NT$70.50 (18.6% above fair value)
Industry Position: 31.6% below the Vehicles & Parts median (#395 of 1322)
No single metric tells the full story. See the TPE:1563 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
SuperAlloy Industrial Co Ltd is engaged in the manufacturing and retail business of lightweight metal products for Automotive industry. It manufactures aircraft parts, auto parts, aluminum and copper parts. Company operates in two reportable segments namely, Wheels and others. The Company is also involved in the import and export of raw materials. It also manufactures wheels of passenger cars, which include sedan, roadster, luxury car, sports car, SUV, hybrid and EV.
59GF Score
Get the complete analysis for TPE:1563
Operating Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:1563 has been successfully added to your 
