SuperAlloy Industrial CoTPE:1563 -0.70%59 PEG Ratio is 17.60 as of Jul. 08, 2026, which is 63% above its 10-year median of 10.80. GuruFocus rates TPE:1563 with a GF Score™ of 59/100 and a GF Value™ of NT$59.42 (Modestly Overvalued). The stock has 10 warning signs investors should review. Among 671 Vehicles & Parts companies, SuperAlloy Industrial Co ranks worse than 95.08% on this metric.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for SuperAlloy Industrial Co's PEG Ratio or its related term are showing as below:
TPE:1563'
s PEG Ratio Range Over the Past 10 Years
Min: 2.31 Med: 10.8 Max: 17.79
Current: 17.6
During the past 13 years, SuperAlloy Industrial Co's highest PEG Ratio was 17.79. The lowest was 2.31. And the median was 10.80.
TPE:1563's PEG Ratio is ranked worse than 95.08% of 671
companies
in the Vehicles & Parts industry
Industry Median: 1.17
vs TPE:1563: 17.60
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
SuperAlloy Industrial Co (TPE:1563) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
SuperAlloy Industrial Co PEG Ratio Related Terms
SuperAlloy Industrial Co PEG Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Auto Parts subindustry, SuperAlloy Industrial Co's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
SuperAlloy Industrial Co PEG Ratio vs Vehicles & Parts Industry
For the Vehicles & Parts industry and Consumer Cyclical sector, SuperAlloy Industrial Co's PEG Ratio distribution charts can be found below:
* The bar in red indicates where SuperAlloy Industrial Co's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
SuperAlloy Industrial Co (TPE:1563) has a PEG Ratio of 17.60 as of Jul. 08, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on SuperAlloy Industrial Co and its competitors. This is 63% above median its historical median of 10.80. Over the past decade, SuperAlloy Industrial Co's PEG Ratio has ranged from 2.31 to 17.79. According to the industry distribution chart, SuperAlloy Industrial Co ranks #638 out of 671 companies in the Vehicles & Parts industry, placing it in the top 95.1%.
Is SuperAlloy Industrial Co's PEG Ratio too high?
SuperAlloy Industrial Co's current PEG Ratio of 17.60 is 63% above median its 10-year median of 10.80. Over the past 10 years, this metric has ranged from a low of 2.31 to a high of 17.79. The Vehicles & Parts industry median PEG Ratio is 1.17. SuperAlloy Industrial Co's value of 17.60 is 1404.3% above this industry median. Based on the distribution chart, SuperAlloy Industrial Co ranks #638 out of 671 companies in the Vehicles & Parts industry, which is in the bottom quartile relative to peers. Overall, SuperAlloy Industrial Co has a GF Score™ of 59/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does SuperAlloy Industrial Co's PEG Ratio compare to ORLY and AZO?
According to the Vehicles & Parts industry distribution chart, SuperAlloy Industrial Co ranks #638 out of 671 companies for PEG Ratio. This places SuperAlloy Industrial Co in the lower half of its industry. The industry median PEG Ratio is 1.17. SuperAlloy Industrial Co's value of 17.60 is 1404.3% above this benchmark. Historically, SuperAlloy Industrial Co's own PEG Ratio has ranged from 2.31 to 17.79 over the past decade. While the company's 10-year median is 10.80 vs. the industry median of 1.17, SuperAlloy Industrial Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for a Vehicles & Parts company?
The median PEG Ratio among Vehicles & Parts companies is 1.17, based on 671 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. SuperAlloy Industrial Co's current PEG Ratio of 17.60 is 1404.3% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on SuperAlloy Industrial Co and its competitors. For the Vehicles & Parts industry, the median PEG Ratio is 1.17 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. SuperAlloy Industrial Co's current PEG Ratio is 17.60, which is 63% above median its own 10-year median of 10.80. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is SuperAlloy Industrial Co stock overvalued right now?
Based on GuruFocus' analysis, SuperAlloy Industrial Co (TPE:1563) is currently considered Modestly Overvalued. The stock's GF Value™ is NT$59.42, compared to a current price of NT$70.50 — trading 18.6% above its estimated fair value. The current PEG Ratio is 17.60, which is 63% above median its 10-year median of 10.80 and 1404.3% above the Vehicles & Parts industry median of 1.17. SuperAlloy Industrial Co's overall GF Score™ is 59/100 with 10 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For SuperAlloy Industrial Co (TPE:1563), the current PEG Ratio is 17.60 as of Jul. 08, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is SuperAlloy Industrial Co (TPE:1563) Overvalued in 2026?
Based on GuruFocus' analysis, SuperAlloy Industrial Co stock appears to be overvalued.
The current stock price of NT$70.50 is trading 18.6% above its estimated GF Value™ of NT$59.42.
GuruFocus considers SuperAlloy Industrial Co to be Modestly Overvalued.
Key valuation signals for TPE:1563:
PEG Ratio: 17.60 (63% above median its 10-year median of 10.80)
GF Value™: NT$59.42 vs. price of NT$70.50 (18.6% above fair value)
Industry Position: 1404.3% above the Vehicles & Parts median (#638 of 671)
No single metric tells the full story. See the TPE:1563 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
SuperAlloy Industrial Co Ltd is engaged in the manufacturing and retail business of lightweight metal products for Automotive industry. It manufactures aircraft parts, auto parts, aluminum and copper parts. Company operates in two reportable segments namely, Wheels and others. The Company is also involved in the import and export of raw materials. It also manufactures wheels of passenger cars, which include sedan, roadster, luxury car, sports car, SUV, hybrid and EV.
59GF Score
Get the complete analysis for TPE:1563
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:1563 has been successfully added to your 
