Inoue Rubber (Thailand) PCLBKK:IRC-R 73 Dividend Payout Ratio is 1.12 as of Mar. 2026, which is 143% above its 10-year median of 0.46. GuruFocus rates BKK:IRC-R with a GF Score™ of 73/100 and a GF Value™ of ฿11.41. The stock has 4 warning signs investors should review. Among 776 Vehicles & Parts companies, Inoue Rubber (Thailand) PCL ranks worse than 54.12% on this metric.
The Dividend Payout Ratio is the measure of dividends paid out to shareholders relative to the company's net income. It is calculated as the Dividends per Share divided by the Earnings per Share (Diluted) during the same time period. Inoue Rubber (Thailand) PCL's Dividend Payout Ratio for the
months ended in Mar. 2026 was 1.12.
The historical rank and industry rank for Inoue Rubber (Thailand) PCL's Dividend Payout Ratio or its related term are showing as below:
During the past 13 years, the highest Dividend Payout Ratio of Inoue Rubber (Thailand) PCL was 1.74. The lowest was 0.34. And the median was 0.46.
BKK:IRC-R's Dividend Payout Ratio is not ranked *
in the Vehicles & Parts industry.
Industry Median: 0.36 * Ranked among companies with meaningful Dividend Payout Ratio only.
During the past 13 years, the highest Trailing Annual Dividend Yield of Inoue Rubber (Thailand) PCL was 9.02%. The lowest was 0.00%. And the median was 4.12%.
During the past 12 months, Inoue Rubber (Thailand) PCL's average Dividends Per Share Growth Rate was -43.20% per year.
During the past 3 years, the average Dividends Per Share Growth Rate was -0.60% per year.
During the past 5 years, the average Dividends Per Share Growth Rate was 4.80% per year.
During the past 10 years, the average Dividends Per Share Growth Rate was -4.90% per year.
During the past 13 years, the highest 3-Year average Dividends Per Share Growth Rate of Inoue Rubber (Thailand) PCL was 62.70% per year. The lowest was -26.00% per year. And the median was 0.95% per year.
The growth rate is calculated with least square regression.
For more information regarding to dividend, please check our Dividend Page.
* Please note that "special dividend" is not included in the calculation of dividend per share and related fields.
Inoue Rubber (Thailand) PCL (BKK:IRC-R) Dividend Payout Ratio Explanation
In dividends investing, Dividend Payout Ratio and Dividend Growth Rate are the two most important variables for consideration. A lower payout ratio may indicate that the company has more room to increase its dividends.
Inoue Rubber (Thailand) PCL Dividend Payout Ratio Related Terms
Inoue Rubber (Thailand) PCL Dividend Payout Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Inoue Rubber (Thailand) PCL Dividend Payout Ratio Chart
BKK:IRC-R vs ORLY, AZO: Dividend Payout Ratio Comparison
For the Auto Parts subindustry, Inoue Rubber (Thailand) PCL's Dividend Payout Ratio, along with its competitors' market caps and Dividend Payout Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Inoue Rubber (Thailand) PCL Dividend Payout Ratio vs Vehicles & Parts Industry
For the Vehicles & Parts industry and Consumer Cyclical sector, Inoue Rubber (Thailand) PCL's Dividend Payout Ratio distribution charts can be found below:
* The bar in red indicates where Inoue Rubber (Thailand) PCL's Dividend Payout Ratio falls into.
Inoue Rubber (Thailand) PCL Dividend Payout Ratio Calculation
The Dividend Payout Ratio is the measure of dividends paid out to shareholders relative to the company's net income. It is calculated as the Dividends per Share divided by the Earnings per Share (Diluted) during the same time period.
Inoue Rubber (Thailand) PCL's Dividend Payout Ratio for the fiscal year that ended in Sep. 2025 is calculated as
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Inoue Rubber (Thailand) PCL (BKK:IRC-R) has a Dividend Payout Ratio of 1.12 as of Mar. 2026. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on Inoue Rubber (Thailand) PCL and its competitors. This is 143% above median its historical median of 0.46. Over the past decade, Inoue Rubber (Thailand) PCL's Dividend Payout Ratio has ranged from 0.34 to 1.74. According to the industry distribution chart, Inoue Rubber (Thailand) PCL ranks #420 out of 776 companies in the Vehicles & Parts industry, placing it in the top 54.1%.
Is Inoue Rubber (Thailand) PCL's Dividend Payout Ratio too high?
Inoue Rubber (Thailand) PCL's current Dividend Payout Ratio of 1.12 is 143% above median its 10-year median of 0.46. Over the past 10 years, this metric has ranged from a low of 0.34 to a high of 1.74. The Vehicles & Parts industry median Dividend Payout Ratio is 0.36. Inoue Rubber (Thailand) PCL's value of 1.12 is 211.1% above this industry median. Based on the distribution chart, Inoue Rubber (Thailand) PCL ranks #420 out of 776 companies in the Vehicles & Parts industry, which is below the industry midpoint. Overall, Inoue Rubber (Thailand) PCL has a GF Score™ of 73/100, reflecting its overall financial health beyond just this single metric.
How does Inoue Rubber (Thailand) PCL's Dividend Payout Ratio compare to ORLY and AZO?
According to the Vehicles & Parts industry distribution chart, Inoue Rubber (Thailand) PCL ranks #420 out of 776 companies for Dividend Payout Ratio. This places Inoue Rubber (Thailand) PCL in the lower half of its industry. The industry median Dividend Payout Ratio is 0.36. Inoue Rubber (Thailand) PCL's value of 1.12 is 211.1% above this benchmark. Historically, Inoue Rubber (Thailand) PCL's own Dividend Payout Ratio has ranged from 0.34 to 1.74 over the past decade. While the company's 10-year median is 0.46 vs. the industry median of 0.36, Inoue Rubber (Thailand) PCL has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Dividend Payout Ratio for a Vehicles & Parts company?
The median Dividend Payout Ratio among Vehicles & Parts companies is 0.36, based on 776 companies in the industry. Companies in the top quartile (top 25%) have a Dividend Payout Ratio significantly above this median, while those in the bottom quartile fall well below. However, Dividend Payout Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Inoue Rubber (Thailand) PCL's current Dividend Payout Ratio of 1.12 is 211.1% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Dividend Payout Ratio mean?
A high Dividend Payout Ratio can signal that a stock is expensive relative to its fundamentals. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on Inoue Rubber (Thailand) PCL and its competitors. For the Vehicles & Parts industry, the median Dividend Payout Ratio is 0.36 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Inoue Rubber (Thailand) PCL's current Dividend Payout Ratio is 1.12, which is 143% above median its own 10-year median of 0.46. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Inoue Rubber (Thailand) PCL stock overvalued right now?
Inoue Rubber (Thailand) PCL (BKK:IRC-R) has a current Dividend Payout Ratio of 1.12. The stock's GF Value™ is ฿11.41, compared to a current price of ฿11.20 — trading 1.8% below its estimated fair value. The current Dividend Payout Ratio is 1.12, which is 143% above median its 10-year median of 0.46 and 211.1% above the Vehicles & Parts industry median of 0.36. Inoue Rubber (Thailand) PCL's overall GF Score™ is 73/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Dividend Payout Ratio calculated?
Dividend Payout Ratio is calculated from a company's financial statements. For Inoue Rubber (Thailand) PCL (BKK:IRC-R), the current Dividend Payout Ratio is 1.12 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Inoue Rubber (Thailand) PCL (BKK:IRC-R) Overvalued in 2026?
Based on GuruFocus' analysis, Inoue Rubber (Thailand) PCL stock appears to be undervalued.
The current stock price of ฿11.20 is trading 1.8% below its estimated GF Value™ of ฿11.41.
Key valuation signals for BKK:IRC-R:
Dividend Payout Ratio: 1.12 (143% above median its 10-year median of 0.46)
GF Value™: ฿11.41 vs. price of ฿11.20 (1.8% below fair value)
Industry Position: 211.1% above the Vehicles & Parts median (#420 of 776)
No single metric tells the full story. See the BKK:IRC-R stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Inoue Rubber (Thailand) PCL is principally engaged in the manufacture and distribution of Automotive Elastomer Products, motorcycle tires, tubes, and industrial elastomer rubber parts. Geographically, it derives a majority of its revenue from Thailand. The company's reportable segments includes geographical areas that are Local and Export, out of which key revenue is generated from Local Segment. Its products involve Automotive Elastomer Products, Motorcycle Tires and Tubes and Industrial Elastomer Parts.
73GF Score
Get the complete analysis for BKK:IRC-R
Dividend Payout Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BKK:IRC-R has been successfully added to your 
