The Dividend Payout Ratio is the measure of dividends paid out to shareholders relative to the company's net income. It is calculated as the Dividends per Share divided by the Earnings per Share (Diluted) during the same time period. Walton Advanced Engineering's Dividend Payout Ratio for the
months ended in Dec. 2025 was 0.00.
The historical rank and industry rank for Walton Advanced Engineering's Dividend Payout Ratio or its related term are showing as below:
TPE:8110'
s Dividend Payout Ratio Range Over the Past 10 Years
Min: 0.08 Med: 0.36 Max: 1.13
Current: 0.08
During the past 13 years, the highest Dividend Payout Ratio of Walton Advanced Engineering was 1.13. The lowest was 0.08. And the median was 0.36.
TPE:8110's Dividend Payout Ratio is ranked better than 91.37% of 452
companies
in the Semiconductors industry
Industry Median: 0.395
vs TPE:8110: 0.08
During the past 13 years, the highest Trailing Annual Dividend Yield of Walton Advanced Engineering was 9.25%. The lowest was 0.25%. And the median was 1.53%.
During the past 12 months, Walton Advanced Engineering's average Dividends Per Share Growth Rate was -2.00% per year.
During the past 3 years, the average Dividends Per Share Growth Rate was 15.40% per year.
During the past 13 years, the highest 3-Year average Dividends Per Share Growth Rate of Walton Advanced Engineering was 34.40% per year. The lowest was -38.30% per year. And the median was 6.20% per year.
The growth rate is calculated with least square regression.
For more information regarding to dividend, please check our Dividend Page.
* Please note that "special dividend" is not included in the calculation of dividend per share and related fields.
Walton Advanced Engineering (TPE:8110) Dividend Payout Ratio Explanation
In dividends investing, Dividend Payout Ratio and Dividend Growth Rate are the two most important variables for consideration. A lower payout ratio may indicate that the company has more room to increase its dividends.
Walton Advanced Engineering Dividend Payout Ratio Related Terms
Walton Advanced Engineering Dividend Payout Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Walton Advanced Engineering Dividend Payout Ratio Chart
TPE:8110 vs AMAT, LRCX, KLAC: Dividend Payout Ratio Comparison
For the Semiconductor Equipment & Materials subindustry, Walton Advanced Engineering's Dividend Payout Ratio, along with its competitors' market caps and Dividend Payout Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Walton Advanced Engineering Dividend Payout Ratio vs Semiconductors Industry
For the Semiconductors industry and Technology sector, Walton Advanced Engineering's Dividend Payout Ratio distribution charts can be found below:
* The bar in red indicates where Walton Advanced Engineering's Dividend Payout Ratio falls into.
Walton Advanced Engineering Dividend Payout Ratio Calculation
The Dividend Payout Ratio is the measure of dividends paid out to shareholders relative to the company's net income. It is calculated as the Dividends per Share divided by the Earnings per Share (Diluted) during the same time period.
Walton Advanced Engineering's Dividend Payout Ratio for the fiscal year that ended in Dec. 2025 is calculated as
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Walton Advanced Engineering (TPE:8110) has a Dividend Payout Ratio of 0.00 as of Dec. 2025. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on Walton Advanced Engineering and its competitors. Over the past decade, Walton Advanced Engineering's Dividend Payout Ratio has ranged from 0.08 to 1.13. According to the industry distribution chart, Walton Advanced Engineering ranks #39 out of 452 companies in the Semiconductors industry, placing it in the top 8.6%.
Is Walton Advanced Engineering's Dividend Payout Ratio too high?
Walton Advanced Engineering's current Dividend Payout Ratio is 0.00. Over the past 10 years, this metric has ranged from a low of 0.08 to a high of 1.13. Based on the distribution chart, Walton Advanced Engineering ranks #39 out of 452 companies in the Semiconductors industry, which is in the top quartile — a strong position relative to peers. Overall, Walton Advanced Engineering has a GF Score™ of 58/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Walton Advanced Engineering's Dividend Payout Ratio compare to AMAT and LRCX?
According to the Semiconductors industry distribution chart, Walton Advanced Engineering ranks #39 out of 452 companies for Dividend Payout Ratio. This places Walton Advanced Engineering in the top 9% of its industry — outperforming the majority of peers. The industry median Dividend Payout Ratio is 0.40. Historically, Walton Advanced Engineering's own Dividend Payout Ratio has ranged from 0.08 to 1.13 over the past decade. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Dividend Payout Ratio for a Semiconductors company?
The median Dividend Payout Ratio among Semiconductors companies is 0.40, based on 452 companies in the industry. Companies in the top quartile (top 25%) have a Dividend Payout Ratio significantly above this median, while those in the bottom quartile fall well below. However, Dividend Payout Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Dividend Payout Ratio mean?
A high Dividend Payout Ratio can signal that a stock is expensive relative to its fundamentals. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on Walton Advanced Engineering and its competitors. For the Semiconductors industry, the median Dividend Payout Ratio is 0.40 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Walton Advanced Engineering's current Dividend Payout Ratio is 0.00. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Walton Advanced Engineering stock overvalued right now?
Based on GuruFocus' analysis, Walton Advanced Engineering (TPE:8110) is currently considered Significantly Overvalued. The stock's GF Value™ is NT$13.83, compared to a current price of NT$52.00 — trading 276% above its estimated fair value. The current Dividend Payout Ratio is 0.00. Walton Advanced Engineering's overall GF Score™ is 58/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Dividend Payout Ratio calculated?
Dividend Payout Ratio is calculated from a company's financial statements. For Walton Advanced Engineering (TPE:8110), the current Dividend Payout Ratio is 0.00 as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Walton Advanced Engineering (TPE:8110) Overvalued in 2026?
Based on GuruFocus' analysis, Walton Advanced Engineering stock appears to be overvalued.
The current stock price of NT$52.00 is trading 276% above its estimated GF Value™ of NT$13.83.
GuruFocus considers Walton Advanced Engineering to be Significantly Overvalued.
Key valuation signals for TPE:8110:
Dividend Payout Ratio: 0.00
GF Value™: NT$13.83 vs. price of NT$52.00 (276% above fair value)
No single metric tells the full story. See the TPE:8110 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Walton Advanced Engineering Inc provides the end-to-end service from wafer probing, IC packaging, final testing, to drop ship to multinational memory semiconductor manufacturers. It has built up a full range of IC package solutions, from legacy frame packages to mainstream BGA packages. Its testing platform includes chip probing, burn-in, final test, and backend. Walton's expertise in testing platform management fulfills customer's testing needs with optimal cost-effectiveness.
58GF Score
Get the complete analysis for TPE:8110
Dividend Payout Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:8110 has been successfully added to your 
