Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Shenzhen Han's CNC Technology Co's PEG Ratio or its related term are showing as below:
HKSE:03200'
s PEG Ratio Range Over the Past 10 Years
Min: 30.23 Med: 43.56 Max: 50.07
Current: 44.98
During the past 8 years, Shenzhen Han's CNC Technology Co's highest PEG Ratio was 50.07. The lowest was 30.23. And the median was 43.56.
HKSE:03200's PEG Ratio is ranked worse than 97.03% of 1280
companies
in the Industrial Products industry
Industry Median: 1.73
vs HKSE:03200: 44.98
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Shenzhen Han's CNC Technology Co (HKSE:03200) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Shenzhen Han's CNC Technology Co PEG Ratio Related Terms
Shenzhen Han's CNC Technology Co PEG Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Specialty Industrial Machinery subindustry, Shenzhen Han's CNC Technology Co's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Shenzhen Han's CNC Technology Co PEG Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Shenzhen Han's CNC Technology Co's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Shenzhen Han's CNC Technology Co's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Shenzhen Han's CNC Technology Co (HKSE:03200) has a PEG Ratio of 15.77 as of Sep. 05, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Shenzhen Han's CNC Technology Co and its competitors. This is 64% below median its historical median of 43.56. Over the past decade, Shenzhen Han's CNC Technology Co's PEG Ratio has ranged from 30.23 to 50.07. According to the industry distribution chart, Shenzhen Han's CNC Technology Co ranks #1242 out of 1280 companies in the Industrial Products industry, placing it in the top 97%.
Is Shenzhen Han's CNC Technology Co's PEG Ratio too high?
Shenzhen Han's CNC Technology Co's current PEG Ratio of 15.77 is 64% below median its 10-year median of 43.56. Over the past 10 years, this metric has ranged from a low of 30.23 to a high of 50.07. The Industrial Products industry median PEG Ratio is 1.73. Shenzhen Han's CNC Technology Co's value of 15.77 is 811.6% above this industry median. Based on the distribution chart, Shenzhen Han's CNC Technology Co ranks #1242 out of 1280 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, Shenzhen Han's CNC Technology Co has a GF Score™ of 66/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Shenzhen Han's CNC Technology Co's PEG Ratio compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Shenzhen Han's CNC Technology Co ranks #1242 out of 1280 companies for PEG Ratio. This places Shenzhen Han's CNC Technology Co in the lower half of its industry. The industry median PEG Ratio is 1.73. Shenzhen Han's CNC Technology Co's value of 15.77 is 811.6% above this benchmark. Historically, Shenzhen Han's CNC Technology Co's own PEG Ratio has ranged from 30.23 to 50.07 over the past decade. While the company's 10-year median is 43.56 vs. the industry median of 1.73, Shenzhen Han's CNC Technology Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for an Industrial Products company?
The median PEG Ratio among Industrial Products companies is 1.73, based on 1,280 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Shenzhen Han's CNC Technology Co's current PEG Ratio of 15.77 is 811.6% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Shenzhen Han's CNC Technology Co and its competitors. For the Industrial Products industry, the median PEG Ratio is 1.73 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Shenzhen Han's CNC Technology Co's current PEG Ratio is 15.77, which is 64% below median its own 10-year median of 43.56. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Shenzhen Han's CNC Technology Co stock overvalued right now?
Based on GuruFocus' analysis, Shenzhen Han's CNC Technology Co (HKSE:03200) is currently considered Modestly Overvalued. The stock's GF Value™ is HK$64.57, compared to a current price of HK$100.80 — trading 56.1% above its estimated fair value. The current PEG Ratio is 15.77, which is 64% below median its 10-year median of 43.56 and 811.6% above the Industrial Products industry median of 1.73. Shenzhen Han's CNC Technology Co's overall GF Score™ is 66/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Shenzhen Han's CNC Technology Co (HKSE:03200), the current PEG Ratio is 15.77 as of Sep. 05, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Shenzhen Han's CNC Technology Co (HKSE:03200) Overvalued in 2026?
Based on GuruFocus' analysis, Shenzhen Han's CNC Technology Co stock appears to be overvalued.
The current stock price of HK$100.80 is trading 56.1% above its estimated GF Value™ of HK$64.57.
GuruFocus considers Shenzhen Han's CNC Technology Co to be Modestly Overvalued.
Key valuation signals for HKSE:03200:
PEG Ratio: 15.77 (64% below median its 10-year median of 43.56)
GF Value™: HK$64.57 vs. price of HK$100.80 (56.1% above fair value)
Industry Position: 811.6% above the Industrial Products median (#1242 of 1280)
No single metric tells the full story. See the HKSE:03200 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Address12 Chongqing Road, Fuhai Street, No. 101 of Building 3, 1-2 Floor, 4 Floor and 7 Floor, Building 3, and 1 Floor and 4 Floor of Building 4, Han’s Laser Intelligence Manufacturing Center, Shenzhen, CHN, 518103
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
HKSE:03200 has been successfully added to your 
