* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Mughal Iron & Steel Industries's PEG Ratio or its related term are showing as below:
KAR:MUGHAL'
s PEG Ratio Range Over the Past 10 Years
Min: 0.1 Med: 0.46 Max: 17.25
Current: 0.75
During the past 12 years, Mughal Iron & Steel Industries's highest PEG Ratio was 17.25. The lowest was 0.10. And the median was 0.46.
KAR:MUGHAL's PEG Ratio is ranked better than 68.5% of 200
companies
in the Steel industry
Industry Median: 1.445
vs KAR:MUGHAL: 0.75
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Mughal Iron & Steel Industries (KAR:MUGHAL) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Mughal Iron & Steel Industries PEG Ratio Related Terms
Mughal Iron & Steel Industries PEG Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Steel subindustry, Mughal Iron & Steel Industries's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Mughal Iron & Steel Industries PEG Ratio vs Steel Industry
For the Steel industry and Basic Materials sector, Mughal Iron & Steel Industries's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Mughal Iron & Steel Industries's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Mughal Iron & Steel Industries (KAR:MUGHAL) has a PEG Ratio of 0.75 as of Jul. 06, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Mughal Iron & Steel Industries and its competitors. This is 63% above median its historical median of 0.46. Over the past decade, Mughal Iron & Steel Industries' PEG Ratio has ranged from 0.10 to 17.25. According to the industry distribution chart, Mughal Iron & Steel Industries ranks #63 out of 200 companies in the Steel industry, placing it in the top 31.5%.
Is Mughal Iron & Steel Industries' PEG Ratio too high?
Mughal Iron & Steel Industries' current PEG Ratio of 0.75 is 63% above median its 10-year median of 0.46. Over the past 10 years, this metric has ranged from a low of 0.10 to a high of 17.25. The Steel industry median PEG Ratio is 1.45. Mughal Iron & Steel Industries' value of 0.75 is 48.1% below this industry median. Based on the distribution chart, Mughal Iron & Steel Industries ranks #63 out of 200 companies in the Steel industry, which is above the industry midpoint. Overall, Mughal Iron & Steel Industries has a GF Score™ of 89/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Mughal Iron & Steel Industries' PEG Ratio compare to NUE and STLD?
According to the Steel industry distribution chart, Mughal Iron & Steel Industries ranks #63 out of 200 companies for PEG Ratio. This puts Mughal Iron & Steel Industries in the upper half of its industry. The industry median PEG Ratio is 1.45. Mughal Iron & Steel Industries' value of 0.75 is 48.1% below this benchmark. Historically, Mughal Iron & Steel Industries' own PEG Ratio has ranged from 0.10 to 17.25 over the past decade. While the company's 10-year median is 0.46 vs. the industry median of 1.45, Mughal Iron & Steel Industries has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for a Steel company?
The median PEG Ratio among Steel companies is 1.45, based on 200 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Mughal Iron & Steel Industries's current PEG Ratio of 0.75 is 48.1% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Mughal Iron & Steel Industries and its competitors. For the Steel industry, the median PEG Ratio is 1.45 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Mughal Iron & Steel Industries's current PEG Ratio is 0.75, which is 63% above median its own 10-year median of 0.46. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Mughal Iron & Steel Industries stock overvalued right now?
Based on GuruFocus' analysis, Mughal Iron & Steel Industries (KAR:MUGHAL) is currently considered Modestly Overvalued. The stock's GF Value™ is ₨70.20, compared to a current price of ₨90.88 — trading 29.5% above its estimated fair value. The current PEG Ratio is 0.75, which is 63% above median its 10-year median of 0.46 and 48.1% below the Steel industry median of 1.45. Mughal Iron & Steel Industries' overall GF Score™ is 89/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Mughal Iron & Steel Industries (KAR:MUGHAL), the current PEG Ratio is 0.75 as of Jul. 06, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Mughal Iron & Steel Industries (KAR:MUGHAL) Overvalued in 2026?
Based on GuruFocus' analysis, Mughal Iron & Steel Industries stock appears to be overvalued.
The current stock price of ₨90.88 is trading 29.5% above its estimated GF Value™ of ₨70.20.
GuruFocus considers Mughal Iron & Steel Industries to be Modestly Overvalued.
Key valuation signals for KAR:MUGHAL:
PEG Ratio: 0.75 (63% above median its 10-year median of 0.46)
GF Value™: ₨70.20 vs. price of ₨90.88 (29.5% above fair value)
Industry Position: 48.1% below the Steel median (#63 of 200)
No single metric tells the full story. See the KAR:MUGHAL stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Mughal Iron & Steel Industries Business Description
Mughal Iron & Steel Industries Ltd is engaged in the manufacturing and trading of mild steel products. The operating segments of the company are Ferrous, Non-Ferrous, and the Energy segment. The company's main products involve Steel re-bars (G60 / Mughal Supreme), Girders, Billets, Copper ingots, and Copper granules.
89GF Score
Get the complete analysis for KAR:MUGHAL
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
KAR:MUGHAL has been successfully added to your 
