Icape HoldingXPAR:ALICA 84 PEG Ratio is 1.13 as of Jul. 07, 2026, which is 126% above its 10-year median of 0.50. GuruFocus rates XPAR:ALICA with a GF Score™ of 84/100 and a GF Value™ of €11.11 (Possible Value Trap). The stock has 6 warning signs investors should review. Among 857 Hardware companies, Icape Holding ranks better than 71.18% on this metric.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Icape Holding's PEG Ratio or its related term are showing as below:
XPAR:ALICA'
s PEG Ratio Range Over the Past 10 Years
Min: 0.39 Med: 0.5 Max: 1.15
Current: 1.15
During the past 8 years, Icape Holding's highest PEG Ratio was 1.15. The lowest was 0.39. And the median was 0.50.
XPAR:ALICA's PEG Ratio is ranked better than 71.18% of 857
companies
in the Hardware industry
Industry Median: 2.27
vs XPAR:ALICA: 1.15
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Icape Holding (XPAR:ALICA) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Icape Holding PEG Ratio Related Terms
Icape Holding PEG Ratio Historical Data
* Premium members only.
The historical data trend for Icape Holding's PEG Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Electronic Components subindustry, Icape Holding's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Icape Holding PEG Ratio vs Hardware Industry
For the Hardware industry and Technology sector, Icape Holding's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Icape Holding's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Icape Holding (XPAR:ALICA) has a PEG Ratio of 1.13 as of Jul. 07, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Icape Holding and its competitors. This is 126% above median its historical median of 0.50. Over the past decade, Icape Holding's PEG Ratio has ranged from 0.39 to 1.15. According to the industry distribution chart, Icape Holding ranks #247 out of 857 companies in the Hardware industry, placing it in the top 28.8%.
Is Icape Holding's PEG Ratio too high?
Icape Holding's current PEG Ratio of 1.13 is 126% above median its 10-year median of 0.50. Over the past 10 years, this metric has ranged from a low of 0.39 to a high of 1.15. The Hardware industry median PEG Ratio is 2.27. Icape Holding's value of 1.13 is 50.2% below this industry median. Based on the distribution chart, Icape Holding ranks #247 out of 857 companies in the Hardware industry, which is above the industry midpoint. Overall, Icape Holding has a GF Score™ of 84/100 and is considered Possible Value Trap, reflecting its overall financial health beyond just this single metric.
How does Icape Holding's PEG Ratio compare to APH and GLW?
According to the Hardware industry distribution chart, Icape Holding ranks #247 out of 857 companies for PEG Ratio. This puts Icape Holding in the upper half of its industry. The industry median PEG Ratio is 2.27. Icape Holding's value of 1.13 is 50.2% below this benchmark. Historically, Icape Holding's own PEG Ratio has ranged from 0.39 to 1.15 over the past decade. While the company's 10-year median is 0.50 vs. the industry median of 2.27, Icape Holding has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for a Hardware company?
The median PEG Ratio among Hardware companies is 2.27, based on 857 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Icape Holding's current PEG Ratio of 1.13 is 50.2% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Icape Holding and its competitors. For the Hardware industry, the median PEG Ratio is 2.27 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Icape Holding's current PEG Ratio is 1.13, which is 126% above median its own 10-year median of 0.50. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Icape Holding stock overvalued right now?
Based on GuruFocus' analysis, Icape Holding (XPAR:ALICA) is currently considered Possible Value Trap. The stock's GF Value™ is €11.11, compared to a current price of €7.10 — trading 36.1% below its estimated fair value. The current PEG Ratio is 1.13, which is 126% above median its 10-year median of 0.50 and 50.2% below the Hardware industry median of 2.27. Icape Holding's overall GF Score™ is 84/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Icape Holding (XPAR:ALICA), the current PEG Ratio is 1.13 as of Jul. 07, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Icape Holding (XPAR:ALICA) Overvalued in 2026?
Based on GuruFocus' analysis, Icape Holding stock appears to be undervalued.
The current stock price of €7.10 is trading 36.1% below its estimated GF Value™ of €11.11.
GuruFocus considers Icape Holding to be Possible Value Trap.
Key valuation signals for XPAR:ALICA:
PEG Ratio: 1.13 (126% above median its 10-year median of 0.50)
GF Value™: €11.11 vs. price of €7.10 (36.1% below fair value)
Industry Position: 50.2% below the Hardware median (#247 of 857)
No single metric tells the full story. See the XPAR:ALICA stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Icape Holding SA is engaged in the distribution, trade, and production of printed circuit boards (PCB), which are essential components used across the electronics industry, including the business, telecommunications, automotive, connected objects, home automation, e-mobility, medical, power, multimedia, and IT industries. Its segemnts are: It operates through the Trade in printed circuit boards (PCB) - Americas; Trade and production of printed circuit boards (PCB); Trade and production of printed circuit boards (PCB) - Central Europe; Trade in printed circuit boards (PCB) - Asia and the Rest of the World, which generates maximum revenue; Trade and production of technical parts (Tech Parts) - Europe; and Trade and production of technical parts (Tech Parts) - Rest of the World.
84GF Score
Get the complete analysis for XPAR:ALICA
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
XPAR:ALICA has been successfully added to your 
