Icape HoldingXPAR:ALICA +0.87%82 Altman Z-Score is 1.70 as of Jul. 02, 2026, which is 9% below its 10-year median of 1.86. GuruFocus rates XPAR:ALICA with a GF Score™ of 82/100 and a GF Value™ of €11.09 (Possible Value Trap). The stock has 5 warning signs investors should review. Among 2,456 Hardware companies, Icape Holding ranks worse than 80.13% on this metric.
The Altman Z-Score is a model designed to predict the likelihood of a company going bankrupt within the next two years. Created by American finance professor Edward Altman in 1968, the model is specifically designed for publicly traded manufacturing companies with assets greater than $1 million.
Warning Sign:
Altman Z-score of 1.69 is in distress zone. This implies bankruptcy possibility in the next two years.
Icape Holding has a Altman Z-Score of 1.70, indicating it is in Distress Zones. This implies bankrupcy possibility in the next two years.
The zones of discrimination were as such:
When Altman Z-Score <= 1.8, it is in Distress Zones.
When Altman Z-Score >= 3, it is in Safe Zones.
When Altman Z-Score is between 1.8 and 3, it is in Grey Zones.
The historical rank and industry rank for Icape Holding's Altman Z-Score or its related term are showing as below:
XPAR:ALICA'
s Altman Z-Score Range Over the Past 10 Years
Min: 1.66 Med: 1.86 Max: 2.44
Current: 1.69
During the past 8 years, Icape Holding's highest Altman Z-Score was 2.44. The lowest was 1.66. And the median was 1.86.
X1: The Working Capital/Total Assets (WC/TA) ratio is a measure of the net liquid assets of the firm relative to the total capitalization. Working capital is defined as the difference between current assets and current liabilities. Ordinarily, a firm experiencing consistent operating losses will have shrinking current assets in relation to total assets. Altman found this one proved to be the most valuable liquidity ratio comparing with the current ratio and the quick ratio. This is however the least significant of the five factors.
X2: Retained Earnings/Total Assets: the RE/TA ratio measures the leverage of a firm. Retained earnings is the account which reports the total amount of reinvested earnings and/or losses of a firm over its entire life. Those firms with high RE, relative to TA, have financed their assets through retention of profits and have not utilized as much debt.
X3, Earnings Before Interest and Taxes/Total Assets (EBIT/TA): This ratio is a measure of the true productivity of the firm's assets, independent of any tax or leverage factors. Since a firm's ultimate existence is based on the earning power of its assets, this ratio appears to be particularly appropriate for studies dealing with corporate failure. This ratio continually outperforms other profitability measures, including cash flow.
X4, Market Value of Equity/Book Value of Total Liabilities (MVE/TL): The measure shows how much the firm's assets can decline in value (measured by market value of equity plus debt) before the liabilities exceed the assets and the firm becomes insolvent.
X5, Revenue/Total Assets (S/TA): The capital-turnover ratio is a standard financial ratio illustrating the sales generating ability of the firm's assets.
Altman Z-Score does not apply to financial companies.
Icape Holding Altman Z-Score Related Terms
Icape Holding Altman Z-Score Historical Data
* Premium members only.
The historical data trend for Icape Holding's Altman Z-Score can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
XPAR:ALICA vs APH, GLW, TEL: Altman Z-Score Comparison
For the Electronic Components subindustry, Icape Holding's Altman Z-Score, along with its competitors' market caps and Altman Z-Score data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Icape Holding Altman Z-Score vs Hardware Industry
For the Hardware industry and Technology sector, Icape Holding's Altman Z-Score distribution charts can be found below:
* The bar in red indicates where Icape Holding's Altman Z-Score falls into.
Altman Z-Score model is an accurate forecaster of failure up to two years prior to distress. It can be considered the assessment of the distress of industrial corporations.
Icape Holding's Altman Z-Score for today is calculated with this formula:
Z
=
1.2
*
X1
+
1.4
*
X2
+
3.3
*
X3
+
0.6
*
X4
+
1.0
*
X5
=
1.2
*
-0.0545
+
1.4
*
-0.0025
+
3.3
*
0.0355
+
0.6
*
0.4571
+
1.0
*
1.3788
=
1.70
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency. GuruFocus does not calculate Altman Z-Score when X4 or X5 value is 0.
Icape Holding (XPAR:ALICA) has a Altman Z-Score of 1.70 as of Jul. 02, 2026. The Altman Z-score measures a company's bankruptcy risk. View historical data on Icape Holding and its competitors. This is near median its historical median of 1.86. Over the past decade, Icape Holding's Altman Z-Score has ranged from 1.66 to 2.44. According to the industry distribution chart, Icape Holding ranks #1968 out of 2456 companies in the Hardware industry, placing it in the top 80.1%.
Is Icape Holding's Altman Z-Score too high?
Icape Holding's current Altman Z-Score of 1.70 is near median its 10-year median of 1.86. Over the past 10 years, this metric has ranged from a low of 1.66 to a high of 2.44. The Hardware industry median Altman Z-Score is 3.60. Icape Holding's value of 1.70 is 52.8% below this industry median. Based on the distribution chart, Icape Holding ranks #1968 out of 2456 companies in the Hardware industry, which is in the bottom quartile relative to peers. Overall, Icape Holding has a GF Score™ of 82/100 and is considered Possible Value Trap, reflecting its overall financial health beyond just this single metric.
How does Icape Holding's Altman Z-Score compare to APH and GLW?
According to the Hardware industry distribution chart, Icape Holding ranks #1968 out of 2456 companies for Altman Z-Score. This places Icape Holding in the lower half of its industry. The industry median Altman Z-Score is 3.60. Icape Holding's value of 1.70 is 52.8% below this benchmark. Historically, Icape Holding's own Altman Z-Score has ranged from 1.66 to 2.44 over the past decade. While the company's 10-year median is 1.86 vs. the industry median of 3.60, Icape Holding has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Altman Z-Score for a Hardware company?
The median Altman Z-Score among Hardware companies is 3.60, based on 2,456 companies in the industry. Companies in the top quartile (top 25%) have a Altman Z-Score significantly above this median, while those in the bottom quartile fall well below. However, Altman Z-Score should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Icape Holding's current Altman Z-Score of 1.70 is 52.8% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Altman Z-Score mean?
A high Altman Z-Score can signal that a stock is expensive relative to its fundamentals. The Altman Z-score measures a company's bankruptcy risk. View historical data on Icape Holding and its competitors. For the Hardware industry, the median Altman Z-Score is 3.60 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Icape Holding's current Altman Z-Score is 1.70, which is near median its own 10-year median of 1.86. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Icape Holding stock overvalued right now?
Based on GuruFocus' analysis, Icape Holding (XPAR:ALICA) is currently considered Possible Value Trap. The stock's GF Value™ is €11.09, compared to a current price of €6.98 — trading 37.1% below its estimated fair value. The current Altman Z-Score is 1.70, which is near median its 10-year median of 1.86 and 52.8% below the Hardware industry median of 3.60. Icape Holding's overall GF Score™ is 82/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Altman Z-Score calculated?
Altman Z-Score is calculated from a company's financial statements. For Icape Holding (XPAR:ALICA), the current Altman Z-Score is 1.70 as of Jul. 02, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Icape Holding (XPAR:ALICA) Overvalued in 2026?
Based on GuruFocus' analysis, Icape Holding stock appears to be undervalued.
The current stock price of €6.98 is trading 37.1% below its estimated GF Value™ of €11.09.
GuruFocus considers Icape Holding to be Possible Value Trap.
Key valuation signals for XPAR:ALICA:
Altman Z-Score: 1.70 (near median its 10-year median of 1.86)
GF Value™: €11.09 vs. price of €6.98 (37.1% below fair value)
Industry Position: 52.8% below the Hardware median (#1968 of 2456)
No single metric tells the full story. See the XPAR:ALICA stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Icape Holding SA is engaged in the distribution, trade, and production of printed circuit boards (PCB), which are essential components used across the electronics industry, including the business, telecommunications, automotive, connected objects, home automation, e-mobility, medical, power, multimedia, and IT industries. Its segemnts are: It operates through the Trade in printed circuit boards (PCB) - Americas; Trade and production of printed circuit boards (PCB); Trade and production of printed circuit boards (PCB) - Central Europe; Trade in printed circuit boards (PCB) - Asia and the Rest of the World, which generates maximum revenue; Trade and production of technical parts (Tech Parts) - Europe; and Trade and production of technical parts (Tech Parts) - Rest of the World.
82GF Score
Get the complete analysis for XPAR:ALICA
Altman Z-Score is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
XPAR:ALICA has been successfully added to your 
