Daiki Aluminium Industry Co has a quick ratio of 0.99. It indicates that the company cannot currently fully pay back its current liabilities.
The historical rank and industry rank for Daiki Aluminium Industry Co's Quick Ratio or its related term are showing as below:
TSE:5702'
s Quick Ratio Range Over the Past 10 Years
Min: 0.93 Med: 1.03 Max: 1.21
Current: 0.99
During the past 13 years, Daiki Aluminium Industry Co's highest Quick Ratio was 1.21. The lowest was 0.93. And the median was 1.03.
TSE:5702's Quick Ratio is ranked worse than 69.82% of 2631
companies
in the Metals & Mining industry
Industry Median: 2.32
vs TSE:5702: 0.99
Daiki Aluminium Industry Co (TSE:5702) Quick Ratio Explanation
The quick ratio is more conservative than the Current Ratio because it excludes inventories from current assets. The ratio derives its name presumably from the fact that assets such as cash and marketable securities are quick sources of cash. Inventories generally take time to be converted into cash, and if they have to be sold quickly, the company may have to accept a lower price than book value of these inventories. As a result, they are justifiably excluded from assets that are ready sources of immediate cash.
In general, low or decreasing quick ratios generally suggest that a company is over-leveraged, struggling to maintain or grow sales, paying bills too quickly or collecting receivables too slowly. On the other hand, a high or increasing quick ratio generally indicates that a company is experiencing solid top-line growth, quickly converting receivables into cash, and easily able to cover its financial obligations. Such companies often have faster inventory turnover and cash conversion cycles.
The higher the quick ratio, the better the company's liquidity position.
Daiki Aluminium Industry Co Quick Ratio Related Terms
Daiki Aluminium Industry Co Quick Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
TSE:5702 vs AA, CENX, CSTM: Quick Ratio Comparison
For the Aluminum subindustry, Daiki Aluminium Industry Co's Quick Ratio, along with its competitors' market caps and Quick Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Daiki Aluminium Industry Co Quick Ratio vs Metals & Mining Industry
For the Metals & Mining industry and Basic Materials sector, Daiki Aluminium Industry Co's Quick Ratio distribution charts can be found below:
* The bar in red indicates where Daiki Aluminium Industry Co's Quick Ratio falls into.
Daiki Aluminium Industry Co Quick Ratio Calculation
The quick ratio measures a company's ability to meet its short-term obligations with its most liquid assets. For this reason, the ratio excludes inventories from current assets.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Daiki Aluminium Industry Co (TSE:5702) has a Quick Ratio of 0.99 as of Mar. 2026. Quick ratio is the ratio of current assets less inventory to current liabilities. View historical data on Daiki Aluminium Industry Co and its competitors. This is near median its historical median of 1.03. Over the past decade, Daiki Aluminium Industry Co's Quick Ratio has ranged from 0.93 to 1.21. According to the industry distribution chart, Daiki Aluminium Industry Co ranks #1837 out of 2631 companies in the Metals & Mining industry, placing it in the top 69.8%.
Is Daiki Aluminium Industry Co's Quick Ratio too high?
Daiki Aluminium Industry Co's current Quick Ratio of 0.99 is near median its 10-year median of 1.03. Over the past 10 years, this metric has ranged from a low of 0.93 to a high of 1.21. The Metals & Mining industry median Quick Ratio is 2.32. Daiki Aluminium Industry Co's value of 0.99 is 57.3% below this industry median. Based on the distribution chart, Daiki Aluminium Industry Co ranks #1837 out of 2631 companies in the Metals & Mining industry, which is below the industry midpoint. Overall, Daiki Aluminium Industry Co has a GF Score™ of 73/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Daiki Aluminium Industry Co's Quick Ratio compare to AA and CENX?
According to the Metals & Mining industry distribution chart, Daiki Aluminium Industry Co ranks #1837 out of 2631 companies for Quick Ratio. This places Daiki Aluminium Industry Co in the lower half of its industry. The industry median Quick Ratio is 2.32. Daiki Aluminium Industry Co's value of 0.99 is 57.3% below this benchmark. Historically, Daiki Aluminium Industry Co's own Quick Ratio has ranged from 0.93 to 1.21 over the past decade. While the company's 10-year median is 1.03 vs. the industry median of 2.32, Daiki Aluminium Industry Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Quick Ratio for a Metals & Mining company?
The median Quick Ratio among Metals & Mining companies is 2.32, based on 2,631 companies in the industry. Companies in the top quartile (top 25%) have a Quick Ratio significantly above this median, while those in the bottom quartile fall well below. However, Quick Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Daiki Aluminium Industry Co's current Quick Ratio of 0.99 is 57.3% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Quick Ratio mean?
A high Quick Ratio can signal that a stock is expensive relative to its fundamentals. Quick ratio is the ratio of current assets less inventory to current liabilities. View historical data on Daiki Aluminium Industry Co and its competitors. For the Metals & Mining industry, the median Quick Ratio is 2.32 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Daiki Aluminium Industry Co's current Quick Ratio is 0.99, which is near median its own 10-year median of 1.03. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Daiki Aluminium Industry Co stock overvalued right now?
Based on GuruFocus' analysis, Daiki Aluminium Industry Co (TSE:5702) is currently considered Fairly Valued. The stock's GF Value™ is 円1,465.89, compared to a current price of 円1,456.00 — trading 0.7% below its estimated fair value. The current Quick Ratio is 0.99, which is near median its 10-year median of 1.03 and 57.3% below the Metals & Mining industry median of 2.32. Daiki Aluminium Industry Co's overall GF Score™ is 73/100 with 2 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Quick Ratio calculated?
Quick Ratio is calculated from a company's financial statements. For Daiki Aluminium Industry Co (TSE:5702), the current Quick Ratio is 0.99 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Daiki Aluminium Industry Co (TSE:5702) Overvalued in 2026?
Based on GuruFocus' analysis, Daiki Aluminium Industry Co stock appears to be undervalued.
The current stock price of 円1,456.00 is trading 0.7% below its estimated GF Value™ of 円1,465.89.
GuruFocus considers Daiki Aluminium Industry Co to be Fairly Valued.
Key valuation signals for TSE:5702:
Quick Ratio: 0.99 (near median its 10-year median of 1.03)
GF Value™: 円1,465.89 vs. price of 円1,456.00 (0.7% below fair value)
Industry Position: 57.3% below the Metals & Mining median (#1837 of 2631)
No single metric tells the full story. See the TSE:5702 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Daiki Aluminium Industry Co Ltd engages in the manufacture and sale of secondary aluminum alloy ingots for die-casting, casting, de-oxidation, and rolling. The company offers secondary aluminum alloy ingots for die-casting, casting, de-oxidation, and rolling; secondary aluminum ingots for roll products; and aluminum mother alloy ingots. It is also involved in the design, construction, and repair of aluminum smelting furnaces; trading of aluminum ingots and aluminum scrap; and processing of turnings, dross, and defective products arising from sources, such as die-cast and cast metal manufacturers.
73GF Score
Get the complete analysis for TSE:5702
Quick Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TSE:5702 has been successfully added to your 
