Altman Z2-Score, also known as Z"-Score, is used to predict the likelihood that a non-manufacturing company (excluding property/financial company) will face bankruptcy within a two-year period.
Good Sign:
Daiki Aluminium Industry Co has a Altman Z2-Score of 3.83, indicating it is in Safe Zones. This implies the Altman Z2-Score is strong.
The zones of discrimination were as such:
When Altman Z2-Score <= 1.1, it is in Distress Zones.
When Altman Z2-Score >= 2.6, it is in Safe Zones.
When Altman Z2-Score is between 1.1 and 2.6, it is in Grey Zones.
The historical rank and industry rank for Daiki Aluminium Industry Co's Altman Z2-Score or its related term are showing as below:
TSE:5702'
s Altman Z2-Score Range Over the Past 10 Years
Min: 2.93 Med: 4.1 Max: 5.41
Current: 3.83
During the past 13 years, Daiki Aluminium Industry Co's highest Altman Z2-Score was 5.41. The lowest was 2.93. And the median was 4.10.
Daiki Aluminium Industry Co (TSE:5702) Altman Z2-Score Explanation
The original Z-Score model was based on publicly traded manufacturing companies while the Z2-Score, also known as Z"-score can be used for any type of company excluding property/financial companies. Both Z-Score and Z2-Score describes the financial health of a company, and its likelihood of financial distress.
X1: The Working Capital/Total Assets (WC/TA) ratio is a measure of the net liquid assets of the firm relative to the total capitalization. Working capital is defined as the difference between current assets and current liabilities. Ordinarily, a firm experiencing consistent operating losses will have shrinking current assets in relation to total assets. Altman found this one proved to be the most valuable liquidity ratio comparing with the current ratio and the quick ratio. This is however the least significant of the five factors.
X2: Retained Earnings/Total Assets: the RE/TA ratio measures the leverage of a firm. Retained earnings is the account which reports the total amount of reinvested earnings and/or losses of a firm over its entire life. Those firms with high RE, relative to TA, have financed their assets through retention of profits and have not utilized as much debt.
X3, Earnings Before Interest and Taxes/Total Assets (EBIT/TA): This ratio is a measure of the true productivity of the firm's assets, independent of any tax or leverage factors. Since a firm's ultimate existence is based on the earning power of its assets, this ratio appears to be particularly appropriate for studies dealing with corporate failure. This ratio continually outperforms other profitability measures, including cash flow.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
TSE:5702 vs AA, CENX, CSTM: Altman Z2-Score Comparison
For the Aluminum subindustry, Daiki Aluminium Industry Co's Altman Z2-Score, along with its competitors' market caps and Altman Z2-Score data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Daiki Aluminium Industry Co Altman Z2-Score vs Metals & Mining Industry
For the Metals & Mining industry and Basic Materials sector, Daiki Aluminium Industry Co's Altman Z2-Score distribution charts can be found below:
* The bar in red indicates where Daiki Aluminium Industry Co's Altman Z2-Score falls into.
Daiki Aluminium Industry Co Altman Z2-Score Calculation
Altman Z-Score model is an accurate forecaster of failure up to two years prior to distress. It can be considered the assessment of the distress of industrial corporations.
Z2-Score, also known as Z"-Score is the Z-Score for non-manufacturing companies excluding property/financial companies.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency. GuruFocus does not calculate Altman Z2-Score when X4_2 value is 0.
Daiki Aluminium Industry Co (TSE:5702) has a Altman Z2-Score of 3.83 as of Jul. 09, 2026. Z2-Score is the Z-Score for non-manufacturing companies excluding property/financial companies, which measures a company's bankruptcy risk. View historical data on Daiki Aluminium Industry Co and its competitors. This is near median its historical median of 4.10. Over the past decade, Daiki Aluminium Industry Co's Altman Z2-Score has ranged from 2.93 to 5.41. According to the industry distribution chart, Daiki Aluminium Industry Co ranks #1113 out of 2614 companies in the Metals & Mining industry, placing it in the top 42.6%.
Is Daiki Aluminium Industry Co's Altman Z2-Score too high?
Daiki Aluminium Industry Co's current Altman Z2-Score of 3.83 is near median its 10-year median of 4.10. Over the past 10 years, this metric has ranged from a low of 2.93 to a high of 5.41. The Metals & Mining industry median Altman Z2-Score is 2.18. Daiki Aluminium Industry Co's value of 3.83 is 75.7% above this industry median. Based on the distribution chart, Daiki Aluminium Industry Co ranks #1113 out of 2614 companies in the Metals & Mining industry, which is above the industry midpoint. Overall, Daiki Aluminium Industry Co has a GF Score™ of 73/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Daiki Aluminium Industry Co's Altman Z2-Score compare to AA and CENX?
According to the Metals & Mining industry distribution chart, Daiki Aluminium Industry Co ranks #1113 out of 2614 companies for Altman Z2-Score. This puts Daiki Aluminium Industry Co in the upper half of its industry. The industry median Altman Z2-Score is 2.18. Daiki Aluminium Industry Co's value of 3.83 is 75.7% above this benchmark. Historically, Daiki Aluminium Industry Co's own Altman Z2-Score has ranged from 2.93 to 5.41 over the past decade. While the company's 10-year median is 4.10 vs. the industry median of 2.18, Daiki Aluminium Industry Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Altman Z2-Score for a Metals & Mining company?
The median Altman Z2-Score among Metals & Mining companies is 2.18, based on 2,614 companies in the industry. Companies in the top quartile (top 25%) have a Altman Z2-Score significantly above this median, while those in the bottom quartile fall well below. However, Altman Z2-Score should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Daiki Aluminium Industry Co's current Altman Z2-Score of 3.83 is 75.7% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Altman Z2-Score mean?
A high Altman Z2-Score can signal that a stock is expensive relative to its fundamentals. Z2-Score is the Z-Score for non-manufacturing companies excluding property/financial companies, which measures a company's bankruptcy risk. View historical data on Daiki Aluminium Industry Co and its competitors. For the Metals & Mining industry, the median Altman Z2-Score is 2.18 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Daiki Aluminium Industry Co's current Altman Z2-Score is 3.83, which is near median its own 10-year median of 4.10. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Daiki Aluminium Industry Co stock overvalued right now?
Based on GuruFocus' analysis, Daiki Aluminium Industry Co (TSE:5702) is currently considered Fairly Valued. The stock's GF Value™ is 円1,465.89, compared to a current price of 円1,456.00 — trading 0.7% below its estimated fair value. The current Altman Z2-Score is 3.83, which is near median its 10-year median of 4.10 and 75.7% above the Metals & Mining industry median of 2.18. Daiki Aluminium Industry Co's overall GF Score™ is 73/100 with 2 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Altman Z2-Score calculated?
Altman Z2-Score is calculated from a company's financial statements. For Daiki Aluminium Industry Co (TSE:5702), the current Altman Z2-Score is 3.83 as of Jul. 09, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Daiki Aluminium Industry Co (TSE:5702) Overvalued in 2026?
Based on GuruFocus' analysis, Daiki Aluminium Industry Co stock appears to be undervalued.
The current stock price of 円1,456.00 is trading 0.7% below its estimated GF Value™ of 円1,465.89.
GuruFocus considers Daiki Aluminium Industry Co to be Fairly Valued.
Key valuation signals for TSE:5702:
Altman Z2-Score: 3.83 (near median its 10-year median of 4.10)
GF Value™: 円1,465.89 vs. price of 円1,456.00 (0.7% below fair value)
Industry Position: 75.7% above the Metals & Mining median (#1113 of 2614)
No single metric tells the full story. See the TSE:5702 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Daiki Aluminium Industry Co Ltd engages in the manufacture and sale of secondary aluminum alloy ingots for die-casting, casting, de-oxidation, and rolling. The company offers secondary aluminum alloy ingots for die-casting, casting, de-oxidation, and rolling; secondary aluminum ingots for roll products; and aluminum mother alloy ingots. It is also involved in the design, construction, and repair of aluminum smelting furnaces; trading of aluminum ingots and aluminum scrap; and processing of turnings, dross, and defective products arising from sources, such as die-cast and cast metal manufacturers.
73GF Score
Get the complete analysis for TSE:5702
Altman Z2-Score is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TSE:5702 has been successfully added to your 
