Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Daiki Aluminium Industry CoTSE:5702 +3.38%75 5-Year Yield-on-Cost % is 6.11 as of Aug. 04, 2026, which is 6% above its 10-year median of 5.75. GuruFocus rates TSE:5702 with a GF Score™ of 75/100 and a GF Value™ of 円1,473.57 (Fairly Valued). The stock has 2 warning signs investors should review. Among 346 Metals & Mining companies, Daiki Aluminium Industry Co ranks better than 77.75% on this metric.
The historical rank and industry rank for Daiki Aluminium Industry Co's 5-Year Yield-on-Cost % or its related term are showing as below:
TSE:5702'
s 5-Year Yield-on-Cost % Range Over the Past 10 Years
Min: 2.22 Med: 5.75 Max: 10.16
Current: 6.11
During the past 13 years, Daiki Aluminium Industry Co's highest Yield on Cost was 10.16. The lowest was 2.22. And the median was 5.75.
TSE:5702's 5-Year Yield-on-Cost % is ranked better than 77.75% of 346
companies
in the Metals & Mining industry
Industry Median: 2.315
vs TSE:5702: 6.11
Daiki Aluminium Industry Co (TSE:5702) 5-Year Yield-on-Cost % Explanation
Of course the risk here is that the company may not raise its dividends as it did before. The key is to select the companies that can consistently raise its dividends. Usually companies with long history of raising dividends tend to do so.
Daiki Aluminium Industry Co 5-Year Yield-on-Cost % Related Terms
TSE:5702 vs AA, CENX, CSTM: 5-Year Yield-on-Cost % Comparison
For the Aluminum subindustry, Daiki Aluminium Industry Co's 5-Year Yield-on-Cost %, along with its competitors' market caps and 5-Year Yield-on-Cost % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Daiki Aluminium Industry Co 5-Year Yield-on-Cost % vs Metals & Mining Industry
For the Metals & Mining industry and Basic Materials sector, Daiki Aluminium Industry Co's 5-Year Yield-on-Cost % distribution charts can be found below:
* The bar in red indicates where Daiki Aluminium Industry Co's 5-Year Yield-on-Cost % falls into.
Daiki Aluminium Industry Co 5-Year Yield-on-Cost % Calculation
Dividend Yield % and dividend growth of a stock is an important factor for income investors. But if company A raises its dividend constantly faster than company B, company A's future dividend yield might be much higher than Company B's even if their yields are the same now and their stock prices do not change.
Yield on Cost assumes that you buy and the stock today, and hold it for 5 years. If the company raises it dividends at the same rate as it did over the past 5 years, the dividends investors receive annually in 5 years relative to the stock price today.
Daiki Aluminium Industry Co (TSE:5702) has a 5-Year Yield-on-Cost % of 6.11 as of Aug. 04, 2026. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Daiki Aluminium Industry Co and its competitors. This is near median its historical median of 5.75. Over the past decade, Daiki Aluminium Industry Co's 5-Year Yield-on-Cost % has ranged from 2.22 to 10.16. According to the industry distribution chart, Daiki Aluminium Industry Co ranks #77 out of 346 companies in the Metals & Mining industry, placing it in the top 22.3%.
Is Daiki Aluminium Industry Co's 5-Year Yield-on-Cost % too high?
Daiki Aluminium Industry Co's current 5-Year Yield-on-Cost % of 6.11 is near median its 10-year median of 5.75. Over the past 10 years, this metric has ranged from a low of 2.22 to a high of 10.16. The Metals & Mining industry median 5-Year Yield-on-Cost % is 2.32. Daiki Aluminium Industry Co's value of 6.11 is 163.9% above this industry median. Based on the distribution chart, Daiki Aluminium Industry Co ranks #77 out of 346 companies in the Metals & Mining industry, which is in the top quartile — a strong position relative to peers. Overall, Daiki Aluminium Industry Co has a GF Score™ of 75/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Daiki Aluminium Industry Co's 5-Year Yield-on-Cost % compare to AA and CENX?
According to the Metals & Mining industry distribution chart, Daiki Aluminium Industry Co ranks #77 out of 346 companies for 5-Year Yield-on-Cost %. This places Daiki Aluminium Industry Co in the top 22% of its industry — outperforming the majority of peers. The industry median 5-Year Yield-on-Cost % is 2.32. Daiki Aluminium Industry Co's value of 6.11 is 163.9% above this benchmark. Historically, Daiki Aluminium Industry Co's own 5-Year Yield-on-Cost % has ranged from 2.22 to 10.16 over the past decade. While the company's 10-year median is 5.75 vs. the industry median of 2.32, Daiki Aluminium Industry Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good 5-Year Yield-on-Cost % for a Metals & Mining company?
The median 5-Year Yield-on-Cost % among Metals & Mining companies is 2.32, based on 346 companies in the industry. Companies in the top quartile (top 25%) have a 5-Year Yield-on-Cost % significantly above this median, while those in the bottom quartile fall well below. However, 5-Year Yield-on-Cost % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Daiki Aluminium Industry Co's current 5-Year Yield-on-Cost % of 6.11 is 163.9% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high 5-Year Yield-on-Cost % mean?
A high 5-Year Yield-on-Cost % can signal that a stock is expensive relative to its fundamentals. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Daiki Aluminium Industry Co and its competitors. For the Metals & Mining industry, the median 5-Year Yield-on-Cost % is 2.32 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Daiki Aluminium Industry Co's current 5-Year Yield-on-Cost % is 6.11, which is near median its own 10-year median of 5.75. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Daiki Aluminium Industry Co stock overvalued right now?
Based on GuruFocus' analysis, Daiki Aluminium Industry Co (TSE:5702) is currently considered Fairly Valued. The stock's GF Value™ is 円1,473.57, compared to a current price of 円1,531.00 — trading 3.9% above its estimated fair value. The current 5-Year Yield-on-Cost % is 6.11, which is near median its 10-year median of 5.75 and 163.9% above the Metals & Mining industry median of 2.32. Daiki Aluminium Industry Co's overall GF Score™ is 75/100 with 2 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is 5-Year Yield-on-Cost % calculated?
5-Year Yield-on-Cost % is calculated from a company's financial statements. For Daiki Aluminium Industry Co (TSE:5702), the current 5-Year Yield-on-Cost % is 6.11 as of Aug. 04, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Daiki Aluminium Industry Co (TSE:5702) Overvalued in 2026?
Based on GuruFocus' analysis, Daiki Aluminium Industry Co stock appears to be overvalued.
The current stock price of 円1,531.00 is trading 3.9% above its estimated GF Value™ of 円1,473.57.
GuruFocus considers Daiki Aluminium Industry Co to be Fairly Valued.
Key valuation signals for TSE:5702:
5-Year Yield-on-Cost %: 6.11 (near median its 10-year median of 5.75)
GF Value™: 円1,473.57 vs. price of 円1,531.00 (3.9% above fair value)
Industry Position: 163.9% above the Metals & Mining median (#77 of 346)
No single metric tells the full story. See the TSE:5702 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Daiki Aluminium Industry Co Ltd engages in the manufacture and sale of secondary aluminum alloy ingots for die-casting, casting, de-oxidation, and rolling. The company offers secondary aluminum alloy ingots for die-casting, casting, de-oxidation, and rolling; secondary aluminum ingots for roll products; and aluminum mother alloy ingots. It is also involved in the design, construction, and repair of aluminum smelting furnaces; trading of aluminum ingots and aluminum scrap; and processing of turnings, dross, and defective products arising from sources, such as die-cast and cast metal manufacturers.
75GF Score
Get the complete analysis for TSE:5702
5-Year Yield-on-Cost % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TSE:5702 has been successfully added to your 
