Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
InnoTekSGX:M14 45 5-Year Yield-on-Cost % is 5.71 as of Sep. 22, 2026, which is 63% above its 10-year median of 3.51. GuruFocus rates SGX:M14 with a GF Score™ of 45/100 and a GF Value™ of S$0.45 (Fairly Valued). The stock has 6 warning signs investors should review. Among 1,880 Industrial Products companies, InnoTek ranks better than 80.16% on this metric.
InnoTek's yield on cost for the quarter that ended in Jun. 2026 was 5.71.
The historical rank and industry rank for InnoTek's 5-Year Yield-on-Cost % or its related term are showing as below:
SGX:M14'
s 5-Year Yield-on-Cost % Range Over the Past 10 Years
Min: 1.24 Med: 3.51 Max: 7.01
Current: 5.71
During the past 13 years, InnoTek's highest Yield on Cost was 7.01. The lowest was 1.24. And the median was 3.51.
SGX:M14's 5-Year Yield-on-Cost % is ranked better than 80.16% of 1880
companies
in the Industrial Products industry
Industry Median: 1.915
vs SGX:M14: 5.71
Of course the risk here is that the company may not raise its dividends as it did before. The key is to select the companies that can consistently raise its dividends. Usually companies with long history of raising dividends tend to do so.
InnoTek 5-Year Yield-on-Cost % Related Terms
SGX:M14 vs ATI, CRS, MLI: 5-Year Yield-on-Cost % Comparison
For the Metal Fabrication subindustry, InnoTek's 5-Year Yield-on-Cost %, along with its competitors' market caps and 5-Year Yield-on-Cost % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
InnoTek 5-Year Yield-on-Cost % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, InnoTek's 5-Year Yield-on-Cost % distribution charts can be found below:
* The bar in red indicates where InnoTek's 5-Year Yield-on-Cost % falls into.
Dividend Yield % and dividend growth of a stock is an important factor for income investors. But if company A raises its dividend constantly faster than company B, company A's future dividend yield might be much higher than Company B's even if their yields are the same now and their stock prices do not change.
Yield on Cost assumes that you buy and the stock today, and hold it for 5 years. If the company raises it dividends at the same rate as it did over the past 5 years, the dividends investors receive annually in 5 years relative to the stock price today.
Therefore, Yield-on-Cost of InnoTek is calculated as
InnoTek (SGX:M14) has a 5-Year Yield-on-Cost % of 5.71 as of Sep. 22, 2026. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on InnoTek and its competitors. This is 63% above median its historical median of 3.51. Over the past decade, InnoTek's 5-Year Yield-on-Cost % has ranged from 1.24 to 7.01. According to the industry distribution chart, InnoTek ranks #373 out of 1880 companies in the Industrial Products industry, placing it in the top 19.8%.
Is InnoTek's 5-Year Yield-on-Cost % too high?
InnoTek's current 5-Year Yield-on-Cost % of 5.71 is 63% above median its 10-year median of 3.51. Over the past 10 years, this metric has ranged from a low of 1.24 to a high of 7.01. The Industrial Products industry median 5-Year Yield-on-Cost % is 1.92. InnoTek's value of 5.71 is 198.2% above this industry median. Based on the distribution chart, InnoTek ranks #373 out of 1880 companies in the Industrial Products industry, which is in the top quartile — a strong position relative to peers. Overall, InnoTek has a GF Score™ of 45/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does InnoTek's 5-Year Yield-on-Cost % compare to ATI and CRS?
According to the Industrial Products industry distribution chart, InnoTek ranks #373 out of 1880 companies for 5-Year Yield-on-Cost %. This places InnoTek in the top 20% of its industry — outperforming the majority of peers. The industry median 5-Year Yield-on-Cost % is 1.92. InnoTek's value of 5.71 is 198.2% above this benchmark. Historically, InnoTek's own 5-Year Yield-on-Cost % has ranged from 1.24 to 7.01 over the past decade. While the company's 10-year median is 3.51 vs. the industry median of 1.92, InnoTek has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good 5-Year Yield-on-Cost % for an Industrial Products company?
The median 5-Year Yield-on-Cost % among Industrial Products companies is 1.92, based on 1,880 companies in the industry. Companies in the top quartile (top 25%) have a 5-Year Yield-on-Cost % significantly above this median, while those in the bottom quartile fall well below. However, 5-Year Yield-on-Cost % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. InnoTek's current 5-Year Yield-on-Cost % of 5.71 is 198.2% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high 5-Year Yield-on-Cost % mean?
A high 5-Year Yield-on-Cost % can signal that a stock is expensive relative to its fundamentals. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on InnoTek and its competitors. For the Industrial Products industry, the median 5-Year Yield-on-Cost % is 1.92 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. InnoTek's current 5-Year Yield-on-Cost % is 5.71, which is 63% above median its own 10-year median of 3.51. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is InnoTek stock overvalued right now?
Based on GuruFocus' analysis, InnoTek (SGX:M14) is currently considered Fairly Valued. The stock's GF Value™ is S$0.45, compared to a current price of S$0.44 — trading 3.3% below its estimated fair value. The current 5-Year Yield-on-Cost % is 5.71, which is 63% above median its 10-year median of 3.51 and 198.2% above the Industrial Products industry median of 1.92. InnoTek's overall GF Score™ is 45/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is 5-Year Yield-on-Cost % calculated?
5-Year Yield-on-Cost % is calculated from a company's financial statements. For InnoTek (SGX:M14), the current 5-Year Yield-on-Cost % is 5.71 as of Sep. 22, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is InnoTek (SGX:M14) Overvalued in 2026?
Based on GuruFocus' analysis, InnoTek stock appears to be undervalued.
The current stock price of S$0.44 is trading 3.3% below its estimated GF Value™ of S$0.45.
GuruFocus considers InnoTek to be Fairly Valued.
Key valuation signals for SGX:M14:
5-Year Yield-on-Cost %: 5.71 (63% above median its 10-year median of 3.51)
GF Value™: S$0.45 vs. price of S$0.44 (3.3% below fair value)
Industry Position: 198.2% above the Industrial Products median (#373 of 1880)
No single metric tells the full story. See the SGX:M14 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
InnoTek Ltd is a Singapore-listed precision metal components manufacturer operating through precision mechanical manufacturing and precision intelligent manufacturing segments, along with corporate and other activities. Its core precision mechanical manufacturing business specializes in metal stamping, tooling design and fabrication, and die-making services for original equipment manufacturers and other industrial customers. Its components serve industries including automotive, office automation, consumer electronics, and AI server hardware. The company operates manufacturing facilities and sales operations across Hong Kong, mainland China, Thailand, Vietnam, Malaysia, and Singapore, with Hong Kong and the PRC accounting for the largest share of revenue. It generates revenue primarily through the sale of precision stamped metal components and related tooling, as well as die-making and precision manufacturing services provided to manufacturers. The precision intelligent manufacturing segment complements these activities with higher-value automated production capabilities.
45GF Score
Get the complete analysis for SGX:M14
5-Year Yield-on-Cost % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
SGX:M14 has been successfully added to your 
