Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Marufuji Sheet Piling CoTSE:8046 -0.10%61 5-Year Yield-on-Cost % is 9.32 as of Aug. 05, 2026, which is 1% above its 10-year median of 9.20. GuruFocus rates TSE:8046 with a GF Score™ of 61/100 and a GF Value™ of 円669.97 (Significantly Overvalued). Among 315 Steel companies, Marufuji Sheet Piling Co ranks better than 80.95% on this metric.
Marufuji Sheet Piling Co (TSE:8046) 5-Year Yield-on-Cost % Explanation
Of course the risk here is that the company may not raise its dividends as it did before. The key is to select the companies that can consistently raise its dividends. Usually companies with long history of raising dividends tend to do so.
Marufuji Sheet Piling Co 5-Year Yield-on-Cost % Related Terms
TSE:8046 vs NUE, STLD, RS: 5-Year Yield-on-Cost % Comparison
For the Steel subindustry, Marufuji Sheet Piling Co's 5-Year Yield-on-Cost %, along with its competitors' market caps and 5-Year Yield-on-Cost % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Marufuji Sheet Piling Co 5-Year Yield-on-Cost % vs Steel Industry
For the Steel industry and Basic Materials sector, Marufuji Sheet Piling Co's 5-Year Yield-on-Cost % distribution charts can be found below:
* The bar in red indicates where Marufuji Sheet Piling Co's 5-Year Yield-on-Cost % falls into.
Marufuji Sheet Piling Co 5-Year Yield-on-Cost % Calculation
Dividend Yield % and dividend growth of a stock is an important factor for income investors. But if company A raises its dividend constantly faster than company B, company A's future dividend yield might be much higher than Company B's even if their yields are the same now and their stock prices do not change.
Yield on Cost assumes that you buy and the stock today, and hold it for 5 years. If the company raises it dividends at the same rate as it did over the past 5 years, the dividends investors receive annually in 5 years relative to the stock price today.
Marufuji Sheet Piling Co (TSE:8046) has a 5-Year Yield-on-Cost % of 9.32 as of Aug. 05, 2026. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Marufuji Sheet Piling Co and its competitors. This is near median its historical median of 9.20. Over the past decade, Marufuji Sheet Piling Co's 5-Year Yield-on-Cost % has ranged from 5.26 to 12.39. According to the industry distribution chart, Marufuji Sheet Piling Co ranks #60 out of 315 companies in the Steel industry, placing it in the top 19%.
Is Marufuji Sheet Piling Co's 5-Year Yield-on-Cost % too high?
Marufuji Sheet Piling Co's current 5-Year Yield-on-Cost % of 9.32 is near median its 10-year median of 9.20. Over the past 10 years, this metric has ranged from a low of 5.26 to a high of 12.39. The Steel industry median 5-Year Yield-on-Cost % is 3.56. Marufuji Sheet Piling Co's value of 9.32 is 161.8% above this industry median. Based on the distribution chart, Marufuji Sheet Piling Co ranks #60 out of 315 companies in the Steel industry, which is in the top quartile — a strong position relative to peers. Overall, Marufuji Sheet Piling Co has a GF Score™ of 61/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Marufuji Sheet Piling Co's 5-Year Yield-on-Cost % compare to NUE and STLD?
According to the Steel industry distribution chart, Marufuji Sheet Piling Co ranks #60 out of 315 companies for 5-Year Yield-on-Cost %. This places Marufuji Sheet Piling Co in the top 19% of its industry — outperforming the majority of peers. The industry median 5-Year Yield-on-Cost % is 3.56. Marufuji Sheet Piling Co's value of 9.32 is 161.8% above this benchmark. Historically, Marufuji Sheet Piling Co's own 5-Year Yield-on-Cost % has ranged from 5.26 to 12.39 over the past decade. While the company's 10-year median is 9.20 vs. the industry median of 3.56, Marufuji Sheet Piling Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good 5-Year Yield-on-Cost % for a Steel company?
The median 5-Year Yield-on-Cost % among Steel companies is 3.56, based on 315 companies in the industry. Companies in the top quartile (top 25%) have a 5-Year Yield-on-Cost % significantly above this median, while those in the bottom quartile fall well below. However, 5-Year Yield-on-Cost % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Marufuji Sheet Piling Co's current 5-Year Yield-on-Cost % of 9.32 is 161.8% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high 5-Year Yield-on-Cost % mean?
A high 5-Year Yield-on-Cost % can signal that a stock is expensive relative to its fundamentals. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Marufuji Sheet Piling Co and its competitors. For the Steel industry, the median 5-Year Yield-on-Cost % is 3.56 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Marufuji Sheet Piling Co's current 5-Year Yield-on-Cost % is 9.32, which is near median its own 10-year median of 9.20. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Marufuji Sheet Piling Co stock overvalued right now?
Based on GuruFocus' analysis, Marufuji Sheet Piling Co (TSE:8046) is currently considered Significantly Overvalued. The stock's GF Value™ is 円669.97, compared to a current price of 円956.00 — trading 42.7% above its estimated fair value. The current 5-Year Yield-on-Cost % is 9.32, which is near median its 10-year median of 9.20 and 161.8% above the Steel industry median of 3.56. Marufuji Sheet Piling Co's overall GF Score™ is 61/100. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is 5-Year Yield-on-Cost % calculated?
5-Year Yield-on-Cost % is calculated from a company's financial statements. For Marufuji Sheet Piling Co (TSE:8046), the current 5-Year Yield-on-Cost % is 9.32 as of Aug. 05, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Marufuji Sheet Piling Co (TSE:8046) Overvalued in 2026?
Based on GuruFocus' analysis, Marufuji Sheet Piling Co stock appears to be overvalued.
The current stock price of 円956.00 is trading 42.7% above its estimated GF Value™ of 円669.97.
GuruFocus considers Marufuji Sheet Piling Co to be Significantly Overvalued.
Key valuation signals for TSE:8046:
5-Year Yield-on-Cost %: 9.32 (near median its 10-year median of 9.20)
GF Value™: 円669.97 vs. price of 円956.00 (42.7% above fair value)
Industry Position: 161.8% above the Steel median (#60 of 315)
No single metric tells the full story. See the TSE:8046 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Marufuji Sheet Piling Co Ltd engages in the manufacture and sale of steel sheet piles, steel plates, and other steel products that include H-shaped steel, architectural steel processed products and reinforced soil wall products. The company offers sheet piles, lightweight steel sheet piles, and corner piles; H shape steel products; steel mountain abstraction products; steel retaining materials; gantry/pier related products; lining plates; and other steel products. It also provides temporary bridges, hat chucks, liner plates, simple holding products, guardrails, PC-ATM products, and two-tone bags, as well as various anchor type reinforced earth products.
61GF Score
Get the complete analysis for TSE:8046
5-Year Yield-on-Cost % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TSE:8046 has been successfully added to your 
