Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Uni Abex Alloy ProductsBOM:504605 +0.84%83 Cyclically Adjusted PS Ratio is 5.94 as of Aug. 27, 2026, which is 168% above its 10-year median of 2.22. GuruFocus rates BOM:504605 with a GF Score™ of 83/100 and a GF Value™ of ₹3,633.75 (Significantly Overvalued). The stock has 2 warning signs investors should review. Among 512 Steel companies, Uni Abex Alloy Products ranks worse than 96.88% on this metric.
The historical rank and industry rank for Uni Abex Alloy Products's Cyclically Adjusted PS Ratio or its related term are showing as below:
BOM:504605'
s Cyclically Adjusted PS Ratio Range Over the Past 10 Years
Min: 0.7 Med: 2.22 Max: 6.87
Current: 5.94
During the past years, Uni Abex Alloy Products's highest Cyclically Adjusted PS Ratio was 6.87. The lowest was 0.70. And the median was 2.22.
BOM:504605's Cyclically Adjusted PS Ratio is ranked worse than 96.88% of 512
companies
in the Steel industry
Industry Median: 0.45
vs BOM:504605: 5.94
The Shiller PE Ratio was first used by professor Robert Shiller. He uses E10 for his Shiller PE Ratio calculation. E10 is the average of the inflation adjusted earnings per share of a company over the past 10 years. The similar calculation is applied by GuruFocus to calculate the Cyclically Adjusted PS Ratio. The Cyclically Adjusted Revenue per Share is the average of the inflation adjusted revenue per share of a company over the past 10 years.
Uni Abex Alloy Products's adjusted revenue per share data for the three months ended in Jun. 2026 was ₹207.759. Add all the adjusted revenue per share for the past 10 years together and divide 10 will get our Cyclically Adjusted Revenue per Share, which is ₹815.29 for the trailing ten years ended in Jun. 2026.
Shiller PE for Stocks: The True Measure of Stock Valuation
Uni Abex Alloy Products (BOM:504605) Cyclically Adjusted PS Ratio Explanation
Compared with the regular PS Ratio, which works poorly for cyclical businesses, the Cyclically Adjusted PS Ratio smoothed out the fluctuations of revenue during business cycles. Therefore it is more accurate in reflecting the valuation of the company.
If a company has consistent business performance, the Cyclically Adjusted PS Ratio should give similar results to regular PS Ratio.
Uni Abex Alloy Products Cyclically Adjusted PS Ratio Related Terms
Uni Abex Alloy Products Cyclically Adjusted PS Ratio Historical Data
* Premium members only.
The historical data trend for Uni Abex Alloy Products's Cyclically Adjusted PS Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Uni Abex Alloy Products Cyclically Adjusted PS Ratio Chart
BOM:504605 vs NUE, STLD, RS: Cyclically Adjusted PS Ratio Comparison
For the Steel subindustry, Uni Abex Alloy Products's Cyclically Adjusted PS Ratio, along with its competitors' market caps and Cyclically Adjusted PS Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Uni Abex Alloy Products Cyclically Adjusted PS Ratio vs Steel Industry
For the Steel industry and Basic Materials sector, Uni Abex Alloy Products's Cyclically Adjusted PS Ratio distribution charts can be found below:
* The bar in red indicates where Uni Abex Alloy Products's Cyclically Adjusted PS Ratio falls into.
Uni Abex Alloy Products Cyclically Adjusted PS Ratio Calculation
Like the Shiller PE Ratio, the Cyclically Adjusted PS Ratio takes the Revenue per Share from the past 10 years, adjusts it for inflation, and then calculates the average. This average is then used for the P/S calculation. Because it considers this 10-year average, it's often referred to as the CAPS Ratio.
The Shiller PE Ratio was first used by professor Robert Shiller to measure the valuation of the overall market. The similar calculation is applied by GuruFocus to calculate the Cyclically Adjusted PS Ratio.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Please note that we use the CPI data of the country/region where the company is headquartered. If the CPI data for that country/region is not available, then we will use the CPI data of the United States as default.
What does a Cyclically Adjusted PS Ratio of 5.94 mean?
Uni Abex Alloy Products (BOM:504605) has a Cyclically Adjusted PS Ratio of 5.94 as of Aug. 27, 2026. Cyclically Adjusted PS Ratio is the ratio of share price to a company's inflation-adjusted revenue per share over a 10-year period. View historical data on Uni Abex Alloy Products and its competitors. This is 168% above median its historical median of 2.22. Over the past decade, Uni Abex Alloy Products' Cyclically Adjusted PS Ratio has ranged from 0.70 to 6.87. According to the industry distribution chart, Uni Abex Alloy Products ranks #496 out of 512 companies in the Steel industry, placing it in the top 96.9%.
Is Uni Abex Alloy Products' Cyclically Adjusted PS Ratio too high?
Uni Abex Alloy Products' current Cyclically Adjusted PS Ratio of 5.94 is 168% above median its 10-year median of 2.22. Over the past 10 years, this metric has ranged from a low of 0.70 to a high of 6.87. The Steel industry median Cyclically Adjusted PS Ratio is 0.45. Uni Abex Alloy Products' value of 5.94 is 1220% above this industry median. Based on the distribution chart, Uni Abex Alloy Products ranks #496 out of 512 companies in the Steel industry, which is in the bottom quartile relative to peers. Overall, Uni Abex Alloy Products has a GF Score™ of 83/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Uni Abex Alloy Products' Cyclically Adjusted PS Ratio compare to NUE and STLD?
According to the Steel industry distribution chart, Uni Abex Alloy Products ranks #496 out of 512 companies for Cyclically Adjusted PS Ratio. This places Uni Abex Alloy Products in the lower half of its industry. The industry median Cyclically Adjusted PS Ratio is 0.45. Uni Abex Alloy Products' value of 5.94 is 1220% above this benchmark. Historically, Uni Abex Alloy Products' own Cyclically Adjusted PS Ratio has ranged from 0.70 to 6.87 over the past decade. While the company's 10-year median is 2.22 vs. the industry median of 0.45, Uni Abex Alloy Products has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Cyclically Adjusted PS Ratio for a Steel company?
The median Cyclically Adjusted PS Ratio among Steel companies is 0.45, based on 512 companies in the industry. Companies in the top quartile (top 25%) have a Cyclically Adjusted PS Ratio significantly above this median, while those in the bottom quartile fall well below. However, Cyclically Adjusted PS Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Uni Abex Alloy Products's current Cyclically Adjusted PS Ratio of 5.94 is 1220% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Cyclically Adjusted PS Ratio mean?
A high Cyclically Adjusted PS Ratio can signal that a stock is expensive relative to its fundamentals. Cyclically Adjusted PS Ratio is the ratio of share price to a company's inflation-adjusted revenue per share over a 10-year period. View historical data on Uni Abex Alloy Products and its competitors. For the Steel industry, the median Cyclically Adjusted PS Ratio is 0.45 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Uni Abex Alloy Products's current Cyclically Adjusted PS Ratio is 5.94, which is 168% above median its own 10-year median of 2.22. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Uni Abex Alloy Products stock overvalued right now?
Based on GuruFocus' analysis, Uni Abex Alloy Products (BOM:504605) is currently considered Significantly Overvalued. The stock's GF Value™ is ₹3,633.75, compared to a current price of ₹4,839.40 — trading 33.2% above its estimated fair value. The current Cyclically Adjusted PS Ratio is 5.94, which is 168% above median its 10-year median of 2.22 and 1220% above the Steel industry median of 0.45. Uni Abex Alloy Products' overall GF Score™ is 83/100 with 2 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Cyclically Adjusted PS Ratio calculated?
Cyclically Adjusted PS Ratio is calculated from a company's financial statements. For Uni Abex Alloy Products (BOM:504605), the current Cyclically Adjusted PS Ratio is 5.94 as of Aug. 27, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Uni Abex Alloy Products (BOM:504605) Overvalued in 2026?
Based on GuruFocus' analysis, Uni Abex Alloy Products stock appears to be overvalued.
The current stock price of ₹4,839.40 is trading 33.2% above its estimated GF Value™ of ₹3,633.75.
GuruFocus considers Uni Abex Alloy Products to be Significantly Overvalued.
Key valuation signals for BOM:504605:
Cyclically Adjusted PS Ratio: 5.94 (168% above median its 10-year median of 2.22)
GF Value™: ₹3,633.75 vs. price of ₹4,839.40 (33.2% above fair value)
Industry Position: 1220% above the Steel median (#496 of 512)
No single metric tells the full story. See the BOM:504605 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Uni Abex Alloy Products Ltd produces static, centrifugal castings and assemblies in heat and corrosion-resistant alloys and specializes in alloy steel castings for decanters and reformer tubes. It offers products such as reformer tubes, harp assemblies, air injection tubes, feed tubes, bowl cylinders, glendon coils, sink rolls, ring segments, radiant tubes, and cages, among others. The company's product is used by various industries such as refinery, petrochemical and fertilizer, sponge iron, iron and steel, galvanizing plants, metal gasket, furnace, decanter, and valve manufacturers. Geographically, the firm derives maximum revenue from its business within India, and also has exposure to other markets such as Sweden, Poland, Bangladesh, China, France, Germany, the USA, and others.
83GF Score
Get the complete analysis for BOM:504605
Cyclically Adjusted PS Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BOM:504605 has been successfully added to your 
