Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Uni Abex Alloy ProductsBOM:504605 -1.97%82 Dividend Yield % is 0.75% as of Jul. 29, 2026, which is 18% below its 10-year median of 0.91. GuruFocus rates BOM:504605 with a GF Score™ of 82/100 and a GF Value™ of ₹3,587.58 (Significantly Overvalued). The stock has 2 warning signs investors should review. Among 315 Steel companies, Uni Abex Alloy Products ranks worse than 83.17% on this metric.
As of today (2026-07-29), the Trailing Annual Dividend Yield of Uni Abex Alloy Products is 0.75%.
The historical rank and industry rank for Uni Abex Alloy Products's Dividend Yield % or its related term are showing as below:
BOM:504605'
s Dividend Yield % Range Over the Past 10 Years
Min: 0.29 Med: 0.91 Max: 2.23
Current: 0.75
During the past 13 years, the highest Dividend Yield of Uni Abex Alloy Products was 2.23%. The lowest was 0.29%. And the median was 0.91%.
BOM:504605's Dividend Yield % is ranked worse than 83.17% of 315
companies
in the Steel industry
Industry Median: 2.81
vs BOM:504605: 0.75
During the past 12 months, Uni Abex Alloy Products's average Dividends Per Share Growth Rate was 40.00% per year.
During the past 3 years, the average Dividends Per Share Growth Rate was 40.90% per year.
During the past 5 years, the average Dividends Per Share Growth Rate was 44.80% per year.
During the past 13 years, the highest 3-Year average Dividends Per Share Growth Rate of Uni Abex Alloy Products was 88.20% per year. The lowest was -20.60% per year. And the median was 27.45% per year.
The growth rate is calculated with least square regression.
For more information regarding to dividend, please check our Dividend Page.
* Please note that "special dividend" is not included in the calculation of dividend per share and related fields.
Uni Abex Alloy Products (BOM:504605) Dividend Yield % Explanation
Over the long term, the return from dividends has been a significant contributor to the total returns produced by equity securities. Studies by Elroy Dimson, Paul Marsh, and Mike Staunton of Princeton University (2002) found that a market-oriented portfolio, which included reinvested dividends, would have generated nearly 85 times the wealth generated by the same portfolio relying solely on capital gains.
Dividends may also qualify a lower tax rate for investors.
In dividends investing, Payout Ratio and Dividend Growth Rate are the two most important variables for consideration. A lower payout ratio may indicate that the company has more room to increase its dividends.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
BOM:504605 vs NUE, STLD, RS: Dividend Yield % Comparison
For the Steel subindustry, Uni Abex Alloy Products's Dividend Yield %, along with its competitors' market caps and Dividend Yield % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Uni Abex Alloy Products Dividend Yield % vs Steel Industry
For the Steel industry and Basic Materials sector, Uni Abex Alloy Products's Dividend Yield % distribution charts can be found below:
* The bar in red indicates where Uni Abex Alloy Products's Dividend Yield % falls into.
Uni Abex Alloy Products Dividend Yield % Calculation
Dividend Yield measures how much a company pays out in dividends each year relative to its share price.
Uni Abex Alloy Products Recent Full-Year* Dividend History
Amount
Ex-date
Record Date
Pay Date
Type
Frequency
Forex Rate
INR 35.000000
2025-09-04
2025-09-04
2025-09-23
Cash Dividend
annually
INR:INR 1.000000
* GuruFocus has an internal rule that if the most recent dividend payment frequency is at least 4 times a year, then the full year will be calculated according to the frequency of payment or the one-year time frame, whichever is stricter.
* GuruFocus converts dividend currency to local traded share price currency in order to calculate dividend yield. Please refer to the last column "Forex Rate" in the above table.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Uni Abex Alloy Products (BOM:504605) has a Dividend Yield % of 0.75% as of Jul. 29, 2026. Dividend yield is the ratio of company dividends to the share price. View historical data on Uni Abex Alloy Products and its competitors. This is 18% below median its historical median of 0.91. Over the past decade, Uni Abex Alloy Products' Dividend Yield % has ranged from 0.29 to 2.23. According to the industry distribution chart, Uni Abex Alloy Products ranks #262 out of 315 companies in the Steel industry, placing it in the top 83.2%.
Is Uni Abex Alloy Products' Dividend Yield % too high?
Uni Abex Alloy Products' current Dividend Yield % of 0.75% is 18% below median its 10-year median of 0.91. Over the past 10 years, this metric has ranged from a low of 0.29 to a high of 2.23. The Steel industry median Dividend Yield % is 2.81. Uni Abex Alloy Products' value of 0.75% is 73.3% below this industry median. Based on the distribution chart, Uni Abex Alloy Products ranks #262 out of 315 companies in the Steel industry, which is in the bottom quartile relative to peers. Overall, Uni Abex Alloy Products has a GF Score™ of 82/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Uni Abex Alloy Products' Dividend Yield % compare to NUE and STLD?
According to the Steel industry distribution chart, Uni Abex Alloy Products ranks #262 out of 315 companies for Dividend Yield %. This places Uni Abex Alloy Products in the lower half of its industry. The industry median Dividend Yield % is 2.81. Uni Abex Alloy Products' value of 0.75% is 73.3% below this benchmark. Historically, Uni Abex Alloy Products' own Dividend Yield % has ranged from 0.29 to 2.23 over the past decade. While the company's 10-year median is 0.91 vs. the industry median of 2.81, Uni Abex Alloy Products has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Dividend Yield % for a Steel company?
The median Dividend Yield % among Steel companies is 2.81, based on 315 companies in the industry. Companies in the top quartile (top 25%) have a Dividend Yield % significantly above this median, while those in the bottom quartile fall well below. However, Dividend Yield % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Uni Abex Alloy Products's current Dividend Yield % of 0.75% is 73.3% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Dividend Yield % mean?
A high Dividend Yield % can signal that a stock is expensive relative to its fundamentals. Dividend yield is the ratio of company dividends to the share price. View historical data on Uni Abex Alloy Products and its competitors. For the Steel industry, the median Dividend Yield % is 2.81 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Uni Abex Alloy Products's current Dividend Yield % is 0.75%, which is 18% below median its own 10-year median of 0.91. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Uni Abex Alloy Products stock overvalued right now?
Based on GuruFocus' analysis, Uni Abex Alloy Products (BOM:504605) is currently considered Significantly Overvalued. The stock's GF Value™ is ₹3,587.58, compared to a current price of ₹4,693.40 — trading 30.8% above its estimated fair value. The current Dividend Yield % is 0.75%, which is 18% below median its 10-year median of 0.91 and 73.3% below the Steel industry median of 2.81. Uni Abex Alloy Products' overall GF Score™ is 82/100 with 2 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Dividend Yield % calculated?
Dividend Yield % is calculated from a company's financial statements. For Uni Abex Alloy Products (BOM:504605), the current Dividend Yield % is 0.75% as of Jul. 29, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Uni Abex Alloy Products (BOM:504605) Overvalued in 2026?
Based on GuruFocus' analysis, Uni Abex Alloy Products stock appears to be overvalued.
The current stock price of ₹4,693.40 is trading 30.8% above its estimated GF Value™ of ₹3,587.58.
GuruFocus considers Uni Abex Alloy Products to be Significantly Overvalued.
Key valuation signals for BOM:504605:
Dividend Yield %: 0.75% (18% below median its 10-year median of 0.91)
GF Value™: ₹3,587.58 vs. price of ₹4,693.40 (30.8% above fair value)
Industry Position: 73.3% below the Steel median (#262 of 315)
No single metric tells the full story. See the BOM:504605 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Uni Abex Alloy Products Ltd produces static, centrifugal castings and assemblies in heat and corrosion-resistant alloys and specializes in alloy steel castings for decanters and reformer tubes. It offers products such as reformer tubes, harp assemblies, air injection tubes, feed tubes, bowl cylinders, glendon coils, sink rolls, ring segments, radiant tubes, and cages, among others. The company's product is used by various industries such as refinery, petrochemical and fertilizer, sponge iron, iron and steel, galvanizing plants, metal gasket, furnace, decanter, and valve manufacturers. Geographically, the firm derives maximum revenue from its business within India, and also has exposure to other markets such as Sweden, Poland, Bangladesh, China, France, Germany, the USA, and others.
82GF Score
Get the complete analysis for BOM:504605
Dividend Yield % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BOM:504605 has been successfully added to your 
