Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
The Dividend Payout Ratio is the measure of dividends paid out to shareholders relative to the company's net income. It is calculated as the Dividends per Share divided by the Earnings per Share (Diluted) during the same time period. Uni Abex Alloy Products's Dividend Payout Ratio for the
months ended in Mar. 2026 was 0.00.
The historical rank and industry rank for Uni Abex Alloy Products's Dividend Payout Ratio or its related term are showing as below:
BOM:504605'
s Dividend Payout Ratio Range Over the Past 10 Years
Min: 0.03 Med: 0.14 Max: 0.27
Current: 0.16
During the past 13 years, the highest Dividend Payout Ratio of Uni Abex Alloy Products was 0.27. The lowest was 0.03. And the median was 0.14.
BOM:504605's Dividend Payout Ratio is ranked better than 79.26% of 270
companies
in the Steel industry
Industry Median: 0.38
vs BOM:504605: 0.16
During the past 13 years, the highest Trailing Annual Dividend Yield of Uni Abex Alloy Products was 2.23%. The lowest was 0.29%. And the median was 0.91%.
During the past 12 months, Uni Abex Alloy Products's average Dividends Per Share Growth Rate was 40.00% per year.
During the past 3 years, the average Dividends Per Share Growth Rate was 40.90% per year.
During the past 5 years, the average Dividends Per Share Growth Rate was 44.80% per year.
During the past 13 years, the highest 3-Year average Dividends Per Share Growth Rate of Uni Abex Alloy Products was 88.20% per year. The lowest was -20.60% per year. And the median was 27.45% per year.
The growth rate is calculated with least square regression.
For more information regarding to dividend, please check our Dividend Page.
* Please note that "special dividend" is not included in the calculation of dividend per share and related fields.
Uni Abex Alloy Products (BOM:504605) Dividend Payout Ratio Explanation
In dividends investing, Dividend Payout Ratio and Dividend Growth Rate are the two most important variables for consideration. A lower payout ratio may indicate that the company has more room to increase its dividends.
Uni Abex Alloy Products Dividend Payout Ratio Related Terms
Uni Abex Alloy Products Dividend Payout Ratio Historical Data
* Premium members only.
The historical data trend for Uni Abex Alloy Products's Dividend Payout Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Uni Abex Alloy Products Dividend Payout Ratio Chart
BOM:504605 vs NUE, STLD, RS: Dividend Payout Ratio Comparison
For the Steel subindustry, Uni Abex Alloy Products's Dividend Payout Ratio, along with its competitors' market caps and Dividend Payout Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Uni Abex Alloy Products Dividend Payout Ratio vs Steel Industry
For the Steel industry and Basic Materials sector, Uni Abex Alloy Products's Dividend Payout Ratio distribution charts can be found below:
* The bar in red indicates where Uni Abex Alloy Products's Dividend Payout Ratio falls into.
Uni Abex Alloy Products Dividend Payout Ratio Calculation
The Dividend Payout Ratio is the measure of dividends paid out to shareholders relative to the company's net income. It is calculated as the Dividends per Share divided by the Earnings per Share (Diluted) during the same time period.
Uni Abex Alloy Products's Dividend Payout Ratio for the fiscal year that ended in Mar. 2026 is calculated as
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Uni Abex Alloy Products (BOM:504605) has a Dividend Payout Ratio of 0.00 as of Mar. 2026. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on Uni Abex Alloy Products and its competitors. Over the past decade, Uni Abex Alloy Products' Dividend Payout Ratio has ranged from 0.03 to 0.27. According to the industry distribution chart, Uni Abex Alloy Products ranks #56 out of 270 companies in the Steel industry, placing it in the top 20.7%.
Is Uni Abex Alloy Products' Dividend Payout Ratio too high?
Uni Abex Alloy Products' current Dividend Payout Ratio is 0.00. Over the past 10 years, this metric has ranged from a low of 0.03 to a high of 0.27. Based on the distribution chart, Uni Abex Alloy Products ranks #56 out of 270 companies in the Steel industry, which is in the top quartile — a strong position relative to peers. Overall, Uni Abex Alloy Products has a GF Score™ of 82/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Uni Abex Alloy Products' Dividend Payout Ratio compare to NUE and STLD?
According to the Steel industry distribution chart, Uni Abex Alloy Products ranks #56 out of 270 companies for Dividend Payout Ratio. This places Uni Abex Alloy Products in the top 21% of its industry — outperforming the majority of peers. The industry median Dividend Payout Ratio is 0.38. Historically, Uni Abex Alloy Products' own Dividend Payout Ratio has ranged from 0.03 to 0.27 over the past decade. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Dividend Payout Ratio for a Steel company?
The median Dividend Payout Ratio among Steel companies is 0.38, based on 270 companies in the industry. Companies in the top quartile (top 25%) have a Dividend Payout Ratio significantly above this median, while those in the bottom quartile fall well below. However, Dividend Payout Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Dividend Payout Ratio mean?
A high Dividend Payout Ratio can signal that a stock is expensive relative to its fundamentals. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on Uni Abex Alloy Products and its competitors. For the Steel industry, the median Dividend Payout Ratio is 0.38 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Uni Abex Alloy Products's current Dividend Payout Ratio is 0.00. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Uni Abex Alloy Products stock overvalued right now?
Based on GuruFocus' analysis, Uni Abex Alloy Products (BOM:504605) is currently considered Significantly Overvalued. The stock's GF Value™ is ₹3,587.58, compared to a current price of ₹4,693.40 — trading 30.8% above its estimated fair value. The current Dividend Payout Ratio is 0.00. Uni Abex Alloy Products' overall GF Score™ is 82/100 with 2 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Dividend Payout Ratio calculated?
Dividend Payout Ratio is calculated from a company's financial statements. For Uni Abex Alloy Products (BOM:504605), the current Dividend Payout Ratio is 0.00 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Uni Abex Alloy Products (BOM:504605) Overvalued in 2026?
Based on GuruFocus' analysis, Uni Abex Alloy Products stock appears to be overvalued.
The current stock price of ₹4,693.40 is trading 30.8% above its estimated GF Value™ of ₹3,587.58.
GuruFocus considers Uni Abex Alloy Products to be Significantly Overvalued.
Key valuation signals for BOM:504605:
Dividend Payout Ratio: 0.00
GF Value™: ₹3,587.58 vs. price of ₹4,693.40 (30.8% above fair value)
No single metric tells the full story. See the BOM:504605 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Uni Abex Alloy Products Ltd produces static, centrifugal castings and assemblies in heat and corrosion-resistant alloys and specializes in alloy steel castings for decanters and reformer tubes. It offers products such as reformer tubes, harp assemblies, air injection tubes, feed tubes, bowl cylinders, glendon coils, sink rolls, ring segments, radiant tubes, and cages, among others. The company's product is used by various industries such as refinery, petrochemical and fertilizer, sponge iron, iron and steel, galvanizing plants, metal gasket, furnace, decanter, and valve manufacturers. Geographically, the firm derives maximum revenue from its business within India, and also has exposure to other markets such as Sweden, Poland, Bangladesh, China, France, Germany, the USA, and others.
82GF Score
Get the complete analysis for BOM:504605
Dividend Payout Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BOM:504605 has been successfully added to your 
