Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Uni Abex Alloy Products has a quick ratio of 4.88. It generally indicates good short-term financial strength.
The historical rank and industry rank for Uni Abex Alloy Products's Quick Ratio or its related term are showing as below:
BOM:504605'
s Quick Ratio Range Over the Past 10 Years
Min: 0.43 Med: 0.95 Max: 4.88
Current: 4.88
During the past 13 years, Uni Abex Alloy Products's highest Quick Ratio was 4.88. The lowest was 0.43. And the median was 0.95.
BOM:504605's Quick Ratio is ranked better than 90.87% of 635
companies
in the Steel industry
Industry Median: 1.02
vs BOM:504605: 4.88
Uni Abex Alloy Products (BOM:504605) Quick Ratio Explanation
The quick ratio is more conservative than the Current Ratio because it excludes inventories from current assets. The ratio derives its name presumably from the fact that assets such as cash and marketable securities are quick sources of cash. Inventories generally take time to be converted into cash, and if they have to be sold quickly, the company may have to accept a lower price than book value of these inventories. As a result, they are justifiably excluded from assets that are ready sources of immediate cash.
In general, low or decreasing quick ratios generally suggest that a company is over-leveraged, struggling to maintain or grow sales, paying bills too quickly or collecting receivables too slowly. On the other hand, a high or increasing quick ratio generally indicates that a company is experiencing solid top-line growth, quickly converting receivables into cash, and easily able to cover its financial obligations. Such companies often have faster inventory turnover and cash conversion cycles.
The higher the quick ratio, the better the company's liquidity position.
Uni Abex Alloy Products Quick Ratio Related Terms
Uni Abex Alloy Products Quick Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
BOM:504605 vs NUE, STLD, RS: Quick Ratio Comparison
For the Steel subindustry, Uni Abex Alloy Products's Quick Ratio, along with its competitors' market caps and Quick Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Uni Abex Alloy Products Quick Ratio vs Steel Industry
For the Steel industry and Basic Materials sector, Uni Abex Alloy Products's Quick Ratio distribution charts can be found below:
* The bar in red indicates where Uni Abex Alloy Products's Quick Ratio falls into.
The quick ratio measures a company's ability to meet its short-term obligations with its most liquid assets. For this reason, the ratio excludes inventories from current assets.
Uni Abex Alloy Products's Quick Ratio for the fiscal year that ended in Mar. 2026 is calculated as
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Uni Abex Alloy Products (BOM:504605) has a Quick Ratio of 4.88 as of Mar. 2026. Quick ratio is the ratio of current assets less inventory to current liabilities. View historical data on Uni Abex Alloy Products and its competitors. This is 414% above median its historical median of 0.95. Over the past decade, Uni Abex Alloy Products' Quick Ratio has ranged from 0.43 to 4.88. According to the industry distribution chart, Uni Abex Alloy Products ranks #58 out of 635 companies in the Steel industry, placing it in the top 9.1%.
Is Uni Abex Alloy Products' Quick Ratio too high?
Uni Abex Alloy Products' current Quick Ratio of 4.88 is 414% above median its 10-year median of 0.95. Over the past 10 years, this metric has ranged from a low of 0.43 to a high of 4.88. The Steel industry median Quick Ratio is 1.02. Uni Abex Alloy Products' value of 4.88 is 378.4% above this industry median. Based on the distribution chart, Uni Abex Alloy Products ranks #58 out of 635 companies in the Steel industry, which is in the top quartile — a strong position relative to peers. Overall, Uni Abex Alloy Products has a GF Score™ of 82/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Uni Abex Alloy Products' Quick Ratio compare to NUE and STLD?
According to the Steel industry distribution chart, Uni Abex Alloy Products ranks #58 out of 635 companies for Quick Ratio. This places Uni Abex Alloy Products in the top 9% of its industry — outperforming the majority of peers. The industry median Quick Ratio is 1.02. Uni Abex Alloy Products' value of 4.88 is 378.4% above this benchmark. Historically, Uni Abex Alloy Products' own Quick Ratio has ranged from 0.43 to 4.88 over the past decade. While the company's 10-year median is 0.95 vs. the industry median of 1.02, Uni Abex Alloy Products has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Quick Ratio for a Steel company?
The median Quick Ratio among Steel companies is 1.02, based on 635 companies in the industry. Companies in the top quartile (top 25%) have a Quick Ratio significantly above this median, while those in the bottom quartile fall well below. However, Quick Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Uni Abex Alloy Products's current Quick Ratio of 4.88 is 378.4% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Quick Ratio mean?
A high Quick Ratio can signal that a stock is expensive relative to its fundamentals. Quick ratio is the ratio of current assets less inventory to current liabilities. View historical data on Uni Abex Alloy Products and its competitors. For the Steel industry, the median Quick Ratio is 1.02 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Uni Abex Alloy Products's current Quick Ratio is 4.88, which is 414% above median its own 10-year median of 0.95. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Uni Abex Alloy Products stock overvalued right now?
Based on GuruFocus' analysis, Uni Abex Alloy Products (BOM:504605) is currently considered Significantly Overvalued. The stock's GF Value™ is ₹3,587.58, compared to a current price of ₹4,693.40 — trading 30.8% above its estimated fair value. The current Quick Ratio is 4.88, which is 414% above median its 10-year median of 0.95 and 378.4% above the Steel industry median of 1.02. Uni Abex Alloy Products' overall GF Score™ is 82/100 with 2 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Quick Ratio calculated?
Quick Ratio is calculated from a company's financial statements. For Uni Abex Alloy Products (BOM:504605), the current Quick Ratio is 4.88 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Uni Abex Alloy Products (BOM:504605) Overvalued in 2026?
Based on GuruFocus' analysis, Uni Abex Alloy Products stock appears to be overvalued.
The current stock price of ₹4,693.40 is trading 30.8% above its estimated GF Value™ of ₹3,587.58.
GuruFocus considers Uni Abex Alloy Products to be Significantly Overvalued.
Key valuation signals for BOM:504605:
Quick Ratio: 4.88 (414% above median its 10-year median of 0.95)
GF Value™: ₹3,587.58 vs. price of ₹4,693.40 (30.8% above fair value)
Industry Position: 378.4% above the Steel median (#58 of 635)
No single metric tells the full story. See the BOM:504605 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Uni Abex Alloy Products Ltd produces static, centrifugal castings and assemblies in heat and corrosion-resistant alloys and specializes in alloy steel castings for decanters and reformer tubes. It offers products such as reformer tubes, harp assemblies, air injection tubes, feed tubes, bowl cylinders, glendon coils, sink rolls, ring segments, radiant tubes, and cages, among others. The company's product is used by various industries such as refinery, petrochemical and fertilizer, sponge iron, iron and steel, galvanizing plants, metal gasket, furnace, decanter, and valve manufacturers. Geographically, the firm derives maximum revenue from its business within India, and also has exposure to other markets such as Sweden, Poland, Bangladesh, China, France, Germany, the USA, and others.
82GF Score
Get the complete analysis for BOM:504605
Quick Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BOM:504605 has been successfully added to your 
