Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Uni Abex Alloy ProductsBOM:504605 -1.97%82 Pretax Margin % is 382.30% as of Mar. 2026, which is 2639% above its 10-year median of 13.96. GuruFocus rates BOM:504605 with a GF Score™ of 82/100 and a GF Value™ of ₹3,587.58 (Significantly Overvalued). The stock has 2 warning signs investors should review. Among 612 Steel companies, Uni Abex Alloy Products ranks better than 99.02% on this metric.
The historical rank and industry rank for Uni Abex Alloy Products's Pretax Margin % or its related term are showing as below:
BOM:504605'
s Pretax Margin % Range Over the Past 10 Years
Min: -14.96 Med: 13.96 Max: 150.3
Current: 150.3
BOM:504605's Pretax Margin % is ranked better than 99.02% of 612
companies
in the Steel industry
Industry Median: 2.69
vs BOM:504605: 150.30
Uni Abex Alloy Products (BOM:504605) Pretax Margin % Explanation
The pretax margin, as know as pretax profit margin, is widely used to measure the operating efficiency of a company before deducting taxes.
The pretax margin is sometimes preferred over the net margin as tax expenditures can make profitability comparisons between companies misleading.
It is a useful tool to compare companies operating in the same sector and less effective when comparing companies from other sectors as each industry generally has different operating expenses and sales patterns.
The long term trend of the pretax margin is a good indicator of the competitiveness and health of the business.
Uni Abex Alloy Products Pretax Margin % Related Terms
Uni Abex Alloy Products Pretax Margin % Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
BOM:504605 vs NUE, STLD, RS: Pretax Margin % Comparison
For the Steel subindustry, Uni Abex Alloy Products's Pretax Margin %, along with its competitors' market caps and Pretax Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Uni Abex Alloy Products Pretax Margin % vs Steel Industry
For the Steel industry and Basic Materials sector, Uni Abex Alloy Products's Pretax Margin % distribution charts can be found below:
* The bar in red indicates where Uni Abex Alloy Products's Pretax Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Uni Abex Alloy Products (BOM:504605) has a Pretax Margin % of 382.30% as of Mar. 2026. Pre-Tax margin is the ratio of total pre-tax income to net sales. View historical data on Uni Abex Alloy Products and its competitors. This is 2639% above median its historical median of 13.96. According to the industry distribution chart, Uni Abex Alloy Products ranks #6 out of 612 companies in the Steel industry, placing it in the top 1%.
Is Uni Abex Alloy Products' Pretax Margin % too high?
Uni Abex Alloy Products' current Pretax Margin % of 382.30% is 2639% above median its 10-year median of 13.96. The Steel industry median Pretax Margin % is 2.69. Uni Abex Alloy Products' value of 382.30% is 14111.9% above this industry median. Based on the distribution chart, Uni Abex Alloy Products ranks #6 out of 612 companies in the Steel industry, which is in the top quartile — a strong position relative to peers. Overall, Uni Abex Alloy Products has a GF Score™ of 82/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Uni Abex Alloy Products' Pretax Margin % compare to NUE and STLD?
According to the Steel industry distribution chart, Uni Abex Alloy Products ranks #6 out of 612 companies for Pretax Margin %. This places Uni Abex Alloy Products in the top 1% of its industry — outperforming the majority of peers. The industry median Pretax Margin % is 2.69. Uni Abex Alloy Products' value of 382.30% is 14111.9% above this benchmark. While the company's 10-year median is 13.96 vs. the industry median of 2.69, Uni Abex Alloy Products has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Pretax Margin % for a Steel company?
The median Pretax Margin % among Steel companies is 2.69, based on 612 companies in the industry. Companies in the top quartile (top 25%) have a Pretax Margin % significantly above this median, while those in the bottom quartile fall well below. However, Pretax Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Uni Abex Alloy Products's current Pretax Margin % of 382.30% is 14111.9% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Pretax Margin % mean?
A high Pretax Margin % can signal that a stock is expensive relative to its fundamentals. Pre-Tax margin is the ratio of total pre-tax income to net sales. View historical data on Uni Abex Alloy Products and its competitors. For the Steel industry, the median Pretax Margin % is 2.69 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Uni Abex Alloy Products's current Pretax Margin % is 382.30%, which is 2639% above median its own 10-year median of 13.96. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Uni Abex Alloy Products stock overvalued right now?
Based on GuruFocus' analysis, Uni Abex Alloy Products (BOM:504605) is currently considered Significantly Overvalued. The stock's GF Value™ is ₹3,587.58, compared to a current price of ₹4,693.40 — trading 30.8% above its estimated fair value. The current Pretax Margin % is 382.30%, which is 2639% above median its 10-year median of 13.96 and 14111.9% above the Steel industry median of 2.69. Uni Abex Alloy Products' overall GF Score™ is 82/100 with 2 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Pretax Margin % calculated?
Pretax Margin % is calculated from a company's financial statements. For Uni Abex Alloy Products (BOM:504605), the current Pretax Margin % is 382.30% as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Uni Abex Alloy Products (BOM:504605) Overvalued in 2026?
Based on GuruFocus' analysis, Uni Abex Alloy Products stock appears to be overvalued.
The current stock price of ₹4,693.40 is trading 30.8% above its estimated GF Value™ of ₹3,587.58.
GuruFocus considers Uni Abex Alloy Products to be Significantly Overvalued.
Key valuation signals for BOM:504605:
Pretax Margin %: 382.30% (2639% above median its 10-year median of 13.96)
GF Value™: ₹3,587.58 vs. price of ₹4,693.40 (30.8% above fair value)
Industry Position: 14111.9% above the Steel median (#6 of 612)
No single metric tells the full story. See the BOM:504605 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Uni Abex Alloy Products Ltd produces static, centrifugal castings and assemblies in heat and corrosion-resistant alloys and specializes in alloy steel castings for decanters and reformer tubes. It offers products such as reformer tubes, harp assemblies, air injection tubes, feed tubes, bowl cylinders, glendon coils, sink rolls, ring segments, radiant tubes, and cages, among others. The company's product is used by various industries such as refinery, petrochemical and fertilizer, sponge iron, iron and steel, galvanizing plants, metal gasket, furnace, decanter, and valve manufacturers. Geographically, the firm derives maximum revenue from its business within India, and also has exposure to other markets such as Sweden, Poland, Bangladesh, China, France, Germany, the USA, and others.
82GF Score
Get the complete analysis for BOM:504605
Pretax Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BOM:504605 has been successfully added to your 
