What is Danieli & C. Officine Meccaniche SpA Days Inventory?
Danieli & C. Officine Meccaniche SpAMIL:DAN -3.02%67 Days Inventory is 160.18 as of Dec. 2025, which is 10% below its 10-year median of 178.76. GuruFocus rates MIL:DAN with a GF Score™ of 67/100 and a GF Value™ of €30.27 (Significantly Overvalued). The stock has 6 warning signs investors should review. Among 2,968 Industrial Products companies, Danieli & C. Officine Meccaniche SpA ranks worse than 55.93% on this metric.
Inventory Turnover measures how fast the company turns over its inventory within a year.
Danieli & C. Officine Meccaniche SpA's Inventory Turnover for the
six
months ended in Dec. 2025 was 1.14.
Inventory-to-Revenue determines the ability of a company to manage their inventory levels. It measures the percentage of Inventories the company currently has on hand to support the current amount of Revenue.
Danieli & C. Officine Meccaniche SpA's Inventory-to-Revenue for the
six
months ended in Dec. 2025 was 0.39.
Danieli & C. Officine Meccaniche SpA (MIL:DAN) Days Inventory Explanation
Days Inventory indicates the liquidity of the inventory. Generally, a lower Days Inventory is preferred as it indicates a shorter duration to clear off the inventory. An increase of the ratio may indicate the company's sales slowed. Similar ratios related to Days Inventory are:
1. Inventory Turnover measures how fast the company turns over its inventory within a year.
Danieli & C. Officine Meccaniche SpA's Inventory Turnover for the
six
months ended in Dec. 2025 is calculated as
2. Inventory-to-Revenue determines the ability of a company to manage their inventory levels. It measures the percentage of Inventories the company currently has on hand to support the current amount of Revenue.
Danieli & C. Officine Meccaniche SpA's Inventory to Revenue for the
six
months ended in Dec. 2025 is calculated as
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Be Aware
A lot of business are seasonable. It makes more sense to compare Days Inventory from the same period in the previous year instead of from the previous quarter.
Danieli & C. Officine Meccaniche SpA Days Inventory Related Terms
Danieli & C. Officine Meccaniche SpA Days Inventory Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Danieli & C. Officine Meccaniche SpA Days Inventory Chart
MIL:DAN vs GEV, ETN, PH: Days Inventory Comparison
For the Specialty Industrial Machinery subindustry, Danieli & C. Officine Meccaniche SpA's Days Inventory, along with its competitors' market caps and Days Inventory data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Danieli & C. Officine Meccaniche SpA Days Inventory vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Danieli & C. Officine Meccaniche SpA's Days Inventory distribution charts can be found below:
* The bar in red indicates where Danieli & C. Officine Meccaniche SpA's Days Inventory falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Danieli & C. Officine Meccaniche SpA (MIL:DAN) has a Days Inventory of 160.18 as of Dec. 2025. Days inventory represents the average amount of days a company holds inventory before selling it. View historical data on Danieli & C. Officine Meccaniche SpA and its competitors. This is 10% below median its historical median of 178.76. Over the past decade, Danieli & C. Officine Meccaniche SpA's Days Inventory has ranged from 105.67 to 347.77. According to the industry distribution chart, Danieli & C. Officine Meccaniche SpA ranks #1660 out of 2968 companies in the Industrial Products industry, placing it in the top 55.9%.
Is Danieli & C. Officine Meccaniche SpA's Days Inventory too high?
Danieli & C. Officine Meccaniche SpA's current Days Inventory of 160.18 is 10% below median its 10-year median of 178.76. Over the past 10 years, this metric has ranged from a low of 105.67 to a high of 347.77. The Industrial Products industry median Days Inventory is 119.47. Danieli & C. Officine Meccaniche SpA's value of 160.18 is 34.1% above this industry median. Based on the distribution chart, Danieli & C. Officine Meccaniche SpA ranks #1660 out of 2968 companies in the Industrial Products industry, which is below the industry midpoint. Overall, Danieli & C. Officine Meccaniche SpA has a GF Score™ of 67/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Danieli & C. Officine Meccaniche SpA's Days Inventory compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Danieli & C. Officine Meccaniche SpA ranks #1660 out of 2968 companies for Days Inventory. This places Danieli & C. Officine Meccaniche SpA in the lower half of its industry. The industry median Days Inventory is 119.47. Danieli & C. Officine Meccaniche SpA's value of 160.18 is 34.1% above this benchmark. Historically, Danieli & C. Officine Meccaniche SpA's own Days Inventory has ranged from 105.67 to 347.77 over the past decade. While the company's 10-year median is 178.76 vs. the industry median of 119.47, Danieli & C. Officine Meccaniche SpA has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Days Inventory for an Industrial Products company?
The median Days Inventory among Industrial Products companies is 119.47, based on 2,968 companies in the industry. Companies in the top quartile (top 25%) have a Days Inventory significantly above this median, while those in the bottom quartile fall well below. However, Days Inventory should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Danieli & C. Officine Meccaniche SpA's current Days Inventory of 160.18 is 34.1% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Days Inventory mean?
A high Days Inventory can signal that a stock is expensive relative to its fundamentals. Days inventory represents the average amount of days a company holds inventory before selling it. View historical data on Danieli & C. Officine Meccaniche SpA and its competitors. For the Industrial Products industry, the median Days Inventory is 119.47 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Danieli & C. Officine Meccaniche SpA's current Days Inventory is 160.18, which is 10% below median its own 10-year median of 178.76. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Danieli & C. Officine Meccaniche SpA stock overvalued right now?
Based on GuruFocus' analysis, Danieli & C. Officine Meccaniche SpA (MIL:DAN) is currently considered Significantly Overvalued. The stock's GF Value™ is €30.27, compared to a current price of €65.80 — trading 117.4% above its estimated fair value. The current Days Inventory is 160.18, which is 10% below median its 10-year median of 178.76 and 34.1% above the Industrial Products industry median of 119.47. Danieli & C. Officine Meccaniche SpA's overall GF Score™ is 67/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Days Inventory calculated?
Days Inventory is calculated from a company's financial statements. For Danieli & C. Officine Meccaniche SpA (MIL:DAN), the current Days Inventory is 160.18 as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Danieli & C. Officine Meccaniche SpA (MIL:DAN) Overvalued in 2026?
Based on GuruFocus' analysis, Danieli & C. Officine Meccaniche SpA stock appears to be overvalued.
The current stock price of €65.80 is trading 117.4% above its estimated GF Value™ of €30.27.
GuruFocus considers Danieli & C. Officine Meccaniche SpA to be Significantly Overvalued.
Key valuation signals for MIL:DAN:
Days Inventory: 160.18 (10% below median its 10-year median of 178.76)
GF Value™: €30.27 vs. price of €65.80 (117.4% above fair value)
Industry Position: 34.1% above the Industrial Products median (#1660 of 2968)
No single metric tells the full story. See the MIL:DAN stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Danieli & C. Officine Meccaniche SpA Business Description
Danieli & C. Officine Meccaniche SpA is an Italy-based company that is engaged in manufacturing and distribution of steel and other nonferrous metal products as well as plant building. The company operates through two segments, namely steelmaking and plant making. The Steelmaking segment manufactures ingots, forged bars, blooms, rolled bars, bar in coils and others. End customers primarily come from the mechanical, automotive, oil & gas, power generation and other sectors. The Plant Making segment designs and builds mines, pellet production plants, furnaces, rolling mills and other various plants and facilities. The company has a global presence, with Europe, Middle East and Far East being the three largest markets for the company.
67GF Score
Get the complete analysis for MIL:DAN
Days Inventory is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
MIL:DAN has been successfully added to your 
