What is Danieli & C. Officine Meccaniche SpA Days Payable?
Danieli & C. Officine Meccaniche SpAMIL:DAN -8.06%70 Days Payable is 272.54 as of Dec. 2025, which is 9% above its 10-year median of 250.07. GuruFocus rates MIL:DAN with a GF Score™ of 70/100 and a GF Value™ of €30.27 (Significantly Overvalued). The stock has 6 warning signs investors should review. Among 2,993 Industrial Products companies, Danieli & C. Officine Meccaniche SpA ranks better than 88.74% on this metric.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Danieli & C. Officine Meccaniche SpA Days Payable Chart
For the Specialty Industrial Machinery subindustry, Danieli & C. Officine Meccaniche SpA's Days Payable, along with its competitors' market caps and Days Payable data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Danieli & C. Officine Meccaniche SpA Days Payable vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Danieli & C. Officine Meccaniche SpA's Days Payable distribution charts can be found below:
* The bar in red indicates where Danieli & C. Officine Meccaniche SpA's Days Payable falls into.
Danieli & C. Officine Meccaniche SpA Days Payable Calculation
Days Payable indicates the number of days that the account payable relative to cost of goods sold the company has. An increase of Days Payable may suggest that the company delays paying its suppliers.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Danieli & C. Officine Meccaniche SpA (MIL:DAN) has a Days Payable of 272.54 as of Dec. 2025. Days payable represents the average amount of days a company waits to pay its invoices from suppliers. View historical data on Danieli & C. Officine Meccaniche SpA and its competitors. This is near median its historical median of 250.07. Over the past decade, Danieli & C. Officine Meccaniche SpA's Days Payable has ranged from 217.16 to 361.31. According to the industry distribution chart, Danieli & C. Officine Meccaniche SpA ranks #337 out of 2993 companies in the Industrial Products industry, placing it in the top 11.3%.
Is Danieli & C. Officine Meccaniche SpA's Days Payable too high?
Danieli & C. Officine Meccaniche SpA's current Days Payable of 272.54 is near median its 10-year median of 250.07. Over the past 10 years, this metric has ranged from a low of 217.16 to a high of 361.31. The Industrial Products industry median Days Payable is 78.08. Danieli & C. Officine Meccaniche SpA's value of 272.54 is 249.1% above this industry median. Based on the distribution chart, Danieli & C. Officine Meccaniche SpA ranks #337 out of 2993 companies in the Industrial Products industry, which is in the top quartile — a strong position relative to peers. Overall, Danieli & C. Officine Meccaniche SpA has a GF Score™ of 70/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Danieli & C. Officine Meccaniche SpA's Days Payable compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Danieli & C. Officine Meccaniche SpA ranks #337 out of 2993 companies for Days Payable. This places Danieli & C. Officine Meccaniche SpA in the top 11% of its industry — outperforming the majority of peers. The industry median Days Payable is 78.08. Danieli & C. Officine Meccaniche SpA's value of 272.54 is 249.1% above this benchmark. Historically, Danieli & C. Officine Meccaniche SpA's own Days Payable has ranged from 217.16 to 361.31 over the past decade. While the company's 10-year median is 250.07 vs. the industry median of 78.08, Danieli & C. Officine Meccaniche SpA has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Days Payable for an Industrial Products company?
The median Days Payable among Industrial Products companies is 78.08, based on 2,993 companies in the industry. Companies in the top quartile (top 25%) have a Days Payable significantly above this median, while those in the bottom quartile fall well below. However, Days Payable should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Danieli & C. Officine Meccaniche SpA's current Days Payable of 272.54 is 249.1% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Days Payable mean?
A high Days Payable can signal that a stock is expensive relative to its fundamentals. Days payable represents the average amount of days a company waits to pay its invoices from suppliers. View historical data on Danieli & C. Officine Meccaniche SpA and its competitors. For the Industrial Products industry, the median Days Payable is 78.08 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Danieli & C. Officine Meccaniche SpA's current Days Payable is 272.54, which is near median its own 10-year median of 250.07. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Danieli & C. Officine Meccaniche SpA stock overvalued right now?
Based on GuruFocus' analysis, Danieli & C. Officine Meccaniche SpA (MIL:DAN) is currently considered Significantly Overvalued. The stock's GF Value™ is €30.27, compared to a current price of €67.85 — trading 124.1% above its estimated fair value. The current Days Payable is 272.54, which is near median its 10-year median of 250.07 and 249.1% above the Industrial Products industry median of 78.08. Danieli & C. Officine Meccaniche SpA's overall GF Score™ is 70/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Days Payable calculated?
Days Payable is calculated from a company's financial statements. For Danieli & C. Officine Meccaniche SpA (MIL:DAN), the current Days Payable is 272.54 as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Danieli & C. Officine Meccaniche SpA (MIL:DAN) Overvalued in 2026?
Based on GuruFocus' analysis, Danieli & C. Officine Meccaniche SpA stock appears to be overvalued.
The current stock price of €67.85 is trading 124.1% above its estimated GF Value™ of €30.27.
GuruFocus considers Danieli & C. Officine Meccaniche SpA to be Significantly Overvalued.
Key valuation signals for MIL:DAN:
Days Payable: 272.54 (near median its 10-year median of 250.07)
GF Value™: €30.27 vs. price of €67.85 (124.1% above fair value)
Industry Position: 249.1% above the Industrial Products median (#337 of 2993)
No single metric tells the full story. See the MIL:DAN stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Danieli & C. Officine Meccaniche SpA Business Description
Danieli & C. Officine Meccaniche SpA is an Italy-based company that is engaged in manufacturing and distribution of steel and other nonferrous metal products as well as plant building. The company operates through two segments, namely steelmaking and plant making. The Steelmaking segment manufactures ingots, forged bars, blooms, rolled bars, bar in coils and others. End customers primarily come from the mechanical, automotive, oil & gas, power generation and other sectors. The Plant Making segment designs and builds mines, pellet production plants, furnaces, rolling mills and other various plants and facilities. The company has a global presence, with Europe, Middle East and Far East being the three largest markets for the company.
70GF Score
Get the complete analysis for MIL:DAN
Days Payable is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
MIL:DAN has been successfully added to your 
