Danieli & C. Officine Meccaniche SpAMIL:DAN -8.06%70 Dividend Payout Ratio is 0.18 as of Dec. 2025, which is 100% above its 10-year median of 0.09. GuruFocus rates MIL:DAN with a GF Score™ of 70/100 and a GF Value™ of €30.27 (Significantly Overvalued). The stock has 6 warning signs investors should review. Among 1,722 Industrial Products companies, Danieli & C. Officine Meccaniche SpA ranks better than 93.15% on this metric.
The Dividend Payout Ratio is the measure of dividends paid out to shareholders relative to the company's net income. It is calculated as the Dividends per Share divided by the Earnings per Share (Diluted) during the same time period. Danieli & C. Officine Meccaniche SpA's Dividend Payout Ratio for the
months ended in Dec. 2025 was 0.18.
The historical rank and industry rank for Danieli & C. Officine Meccaniche SpA's Dividend Payout Ratio or its related term are showing as below:
MIL:DAN'
s Dividend Payout Ratio Range Over the Past 10 Years
Min: 0.05 Med: 0.09 Max: 0.12
Current: 0.09
During the past 13 years, the highest Dividend Payout Ratio of Danieli & C. Officine Meccaniche SpA was 0.12. The lowest was 0.05. And the median was 0.09.
MIL:DAN's Dividend Payout Ratio is ranked better than 93.15% of 1722
companies
in the Industrial Products industry
Industry Median: 0.37
vs MIL:DAN: 0.09
During the past 13 years, the highest Trailing Annual Dividend Yield of Danieli & C. Officine Meccaniche SpA was 1.36%. The lowest was 0.41%. And the median was 0.67%.
During the past 3 years, the average Dividends Per Share Growth Rate was 22.20% per year.
During the past 5 years, the average Dividends Per Share Growth Rate was 20.40% per year.
During the past 10 years, the average Dividends Per Share Growth Rate was 8.70% per year.
During the past 13 years, the highest 3-Year average Dividends Per Share Growth Rate of Danieli & C. Officine Meccaniche SpA was 60.90% per year. The lowest was -32.80% per year. And the median was 16.90% per year.
The growth rate is calculated with least square regression.
For more information regarding to dividend, please check our Dividend Page.
* Please note that "special dividend" is not included in the calculation of dividend per share and related fields.
Danieli & C. Officine Meccaniche SpA (MIL:DAN) Dividend Payout Ratio Explanation
In dividends investing, Dividend Payout Ratio and Dividend Growth Rate are the two most important variables for consideration. A lower payout ratio may indicate that the company has more room to increase its dividends.
Danieli & C. Officine Meccaniche SpA Dividend Payout Ratio Related Terms
Danieli & C. Officine Meccaniche SpA Dividend Payout Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Danieli & C. Officine Meccaniche SpA Dividend Payout Ratio Chart
MIL:DAN vs GEV, ETN, PH: Dividend Payout Ratio Comparison
For the Specialty Industrial Machinery subindustry, Danieli & C. Officine Meccaniche SpA's Dividend Payout Ratio, along with its competitors' market caps and Dividend Payout Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Danieli & C. Officine Meccaniche SpA Dividend Payout Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Danieli & C. Officine Meccaniche SpA's Dividend Payout Ratio distribution charts can be found below:
* The bar in red indicates where Danieli & C. Officine Meccaniche SpA's Dividend Payout Ratio falls into.
Danieli & C. Officine Meccaniche SpA Dividend Payout Ratio Calculation
The Dividend Payout Ratio is the measure of dividends paid out to shareholders relative to the company's net income. It is calculated as the Dividends per Share divided by the Earnings per Share (Diluted) during the same time period.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Danieli & C. Officine Meccaniche SpA (MIL:DAN) has a Dividend Payout Ratio of 0.18 as of Dec. 2025. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on Danieli & C. Officine Meccaniche SpA and its competitors. This is 100% above median its historical median of 0.09. Over the past decade, Danieli & C. Officine Meccaniche SpA's Dividend Payout Ratio has ranged from 0.05 to 0.12. According to the industry distribution chart, Danieli & C. Officine Meccaniche SpA ranks #118 out of 1722 companies in the Industrial Products industry, placing it in the top 6.9%.
Is Danieli & C. Officine Meccaniche SpA's Dividend Payout Ratio too high?
Danieli & C. Officine Meccaniche SpA's current Dividend Payout Ratio of 0.18 is 100% above median its 10-year median of 0.09. Over the past 10 years, this metric has ranged from a low of 0.05 to a high of 0.12. The Industrial Products industry median Dividend Payout Ratio is 0.37. Danieli & C. Officine Meccaniche SpA's value of 0.18 is 51.4% below this industry median. Based on the distribution chart, Danieli & C. Officine Meccaniche SpA ranks #118 out of 1722 companies in the Industrial Products industry, which is in the top quartile — a strong position relative to peers. Overall, Danieli & C. Officine Meccaniche SpA has a GF Score™ of 70/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Danieli & C. Officine Meccaniche SpA's Dividend Payout Ratio compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Danieli & C. Officine Meccaniche SpA ranks #118 out of 1722 companies for Dividend Payout Ratio. This places Danieli & C. Officine Meccaniche SpA in the top 7% of its industry — outperforming the majority of peers. The industry median Dividend Payout Ratio is 0.37. Danieli & C. Officine Meccaniche SpA's value of 0.18 is 51.4% below this benchmark. Historically, Danieli & C. Officine Meccaniche SpA's own Dividend Payout Ratio has ranged from 0.05 to 0.12 over the past decade. While the company's 10-year median is 0.09 vs. the industry median of 0.37, Danieli & C. Officine Meccaniche SpA has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Dividend Payout Ratio for an Industrial Products company?
The median Dividend Payout Ratio among Industrial Products companies is 0.37, based on 1,722 companies in the industry. Companies in the top quartile (top 25%) have a Dividend Payout Ratio significantly above this median, while those in the bottom quartile fall well below. However, Dividend Payout Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Danieli & C. Officine Meccaniche SpA's current Dividend Payout Ratio of 0.18 is 51.4% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Dividend Payout Ratio mean?
A high Dividend Payout Ratio can signal that a stock is expensive relative to its fundamentals. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on Danieli & C. Officine Meccaniche SpA and its competitors. For the Industrial Products industry, the median Dividend Payout Ratio is 0.37 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Danieli & C. Officine Meccaniche SpA's current Dividend Payout Ratio is 0.18, which is 100% above median its own 10-year median of 0.09. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Danieli & C. Officine Meccaniche SpA stock overvalued right now?
Based on GuruFocus' analysis, Danieli & C. Officine Meccaniche SpA (MIL:DAN) is currently considered Significantly Overvalued. The stock's GF Value™ is €30.27, compared to a current price of €67.85 — trading 124.1% above its estimated fair value. The current Dividend Payout Ratio is 0.18, which is 100% above median its 10-year median of 0.09 and 51.4% below the Industrial Products industry median of 0.37. Danieli & C. Officine Meccaniche SpA's overall GF Score™ is 70/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Dividend Payout Ratio calculated?
Dividend Payout Ratio is calculated from a company's financial statements. For Danieli & C. Officine Meccaniche SpA (MIL:DAN), the current Dividend Payout Ratio is 0.18 as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Danieli & C. Officine Meccaniche SpA (MIL:DAN) Overvalued in 2026?
Based on GuruFocus' analysis, Danieli & C. Officine Meccaniche SpA stock appears to be overvalued.
The current stock price of €67.85 is trading 124.1% above its estimated GF Value™ of €30.27.
GuruFocus considers Danieli & C. Officine Meccaniche SpA to be Significantly Overvalued.
Key valuation signals for MIL:DAN:
Dividend Payout Ratio: 0.18 (100% above median its 10-year median of 0.09)
GF Value™: €30.27 vs. price of €67.85 (124.1% above fair value)
Industry Position: 51.4% below the Industrial Products median (#118 of 1722)
No single metric tells the full story. See the MIL:DAN stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Danieli & C. Officine Meccaniche SpA Business Description
Danieli & C. Officine Meccaniche SpA is an Italy-based company that is engaged in manufacturing and distribution of steel and other nonferrous metal products as well as plant building. The company operates through two segments, namely steelmaking and plant making. The Steelmaking segment manufactures ingots, forged bars, blooms, rolled bars, bar in coils and others. End customers primarily come from the mechanical, automotive, oil & gas, power generation and other sectors. The Plant Making segment designs and builds mines, pellet production plants, furnaces, rolling mills and other various plants and facilities. The company has a global presence, with Europe, Middle East and Far East being the three largest markets for the company.
70GF Score
Get the complete analysis for MIL:DAN
Dividend Payout Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
MIL:DAN has been successfully added to your 
