Danieli & C. Officine Meccaniche SpA (MIL:DAN) LT-Debt-to-Total-Asset: 0.07 (As of Dec. 2025)


MIL:DAN Danieli & C. Officine Meccaniche SpA MIL:DAN
67 GF Score
Price €65.80
GF Value €30.27
Valuation Significantly Overvalued
! 6 Warning Signs
View Full Analysis

What is Danieli & C. Officine Meccaniche SpA LT-Debt-to-Total-Asset?

Danieli & C. Officine Meccaniche SpA MIL:DAN -3.02% 67 LT-Debt-to-Total-Asset is 0.07 as of Dec. 2025. GuruFocus rates MIL:DAN with a GF Score™ of 67/100 and a GF Value™ of €30.27 (Significantly Overvalued). The stock has 6 warning signs investors should review.

LT Debt to Total Assets is a measurement representing the percentage of a corporation's assets that are financed with loans and financial obligations lasting more than one year. The ratio provides a general measure of the financial position of a company, including its ability to meet financial requirements for outstanding loans. It is calculated as a company's Long-Term Debt & Capital Lease Obligationdivide by its Total Assets. Danieli & C. Officine Meccaniche SpA's long-term debt to total assests ratio for the quarter that ended in Dec. 2025 was 0.07.

Danieli & C. Officine Meccaniche SpA's long-term debt to total assets ratio declined from Dec. 2024 (0.07) to Dec. 2025 (0.07). It may suggest that Danieli & C. Officine Meccaniche SpA is progressively becoming less dependent on debt to grow their business.

Danieli & C. Officine Meccaniche SpA  (MIL:DAN) LT-Debt-to-Total-Asset Explanation

LT Debt to Total Asset is a measurement representing the percentage of a corporation's assets that are financed with loans and financial obligations lasting more than one year. The ratio provides a general measure of the financial position of a company, including its ability to meet financial requirements for outstanding loans. A year-over-year decrease in this metric would suggest the company is progressively becoming less dependent on debt to grow their business.

Danieli & C. Officine Meccaniche SpA LT-Debt-to-Total-Asset Related Terms

Danieli & C. Officine Meccaniche SpA LT-Debt-to-Total-Asset Historical Data

* Premium members only.

The historical data trend for Danieli & C. Officine Meccaniche SpA's LT-Debt-to-Total-Asset can be seen below:

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

Danieli & C. Officine Meccaniche SpA LT-Debt-to-Total-Asset Chart

Danieli & C. Officine Meccaniche SpA Annual Data
Trend Jun16 Jun17 Jun18 Jun19 Jun20 Jun21 Jun22 Jun23 Jun24 Jun25
LT-Debt-to-Total-Asset
Get a 7-Day Free Trial Premium Member Only Premium Member Only 0.06 0.03 0.04 0.07 0.07

Danieli & C. Officine Meccaniche SpA Semi-Annual Data
Jun16 Dec16 Jun17 Dec17 Jun18 Dec18 Jun19 Dec19 Jun20 Dec20 Jun21 Dec21 Jun22 Dec22 Jun23 Dec23 Jun24 Dec24 Jun25 Dec25
LT-Debt-to-Total-Asset Get a 7-Day Free Trial Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only 0.07 0.07 0.07 0.07 0.07
MIL:DAN
67GF Score
Danieli & C. Officine Meccaniche SpA MIL:DAN
LT-Debt-to-Total-Asset is just one metric. See GF Score™, valuation, warning signs, and more.
View Full Analysis

Danieli & C. Officine Meccaniche SpA LT-Debt-to-Total-Asset Calculation

Danieli & C. Officine Meccaniche SpA's Long-Term Debt to Total Asset Ratio for the fiscal year that ended in Jun. 2025 is calculated as

LT Debt to Total Assets (A: Jun. 2025 )=Long-Term Debt & Capital Lease Obligation (A: Jun. 2025 )/Total Assets (A: Jun. 2025 )
=545.658/7875.975
=0.07

Danieli & C. Officine Meccaniche SpA's Long-Term Debt to Total Asset Ratio for the quarter that ended in Dec. 2025 is calculated as

LT Debt to Total Assets (Q: Dec. 2025 )=Long-Term Debt & Capital Lease Obligation (Q: Dec. 2025 )/Total Assets (Q: Dec. 2025 )
=552.426/8007.395
=0.07

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

Frequently Asked Questions Learn more about LT-Debt-to-Total-Asset →
What does a LT-Debt-to-Total-Asset of 0.07 mean?
Danieli & C. Officine Meccaniche SpA (MIL:DAN) has a LT-Debt-to-Total-Asset of 0.07 as of Dec. 2025. Long-term Debt to Total Asset ratio is the ratio of total long-term debt to total assets. View historical data on Danieli & C. Officine Meccaniche SpA and its competitors.
Is Danieli & C. Officine Meccaniche SpA's LT-Debt-to-Total-Asset too high?
Danieli & C. Officine Meccaniche SpA's current LT-Debt-to-Total-Asset is 0.07. Overall, Danieli & C. Officine Meccaniche SpA has a GF Score™ of 67/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Danieli & C. Officine Meccaniche SpA's LT-Debt-to-Total-Asset compare to GEV and ETN?
Danieli & C. Officine Meccaniche SpA's LT-Debt-to-Total-Asset of 0.07 can be compared against companies in the Industrial Products industry. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good LT-Debt-to-Total-Asset for an Industrial Products company?
A good LT-Debt-to-Total-Asset depends on the Industrial Products industry context. However, LT-Debt-to-Total-Asset should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high LT-Debt-to-Total-Asset mean?
A high LT-Debt-to-Total-Asset can signal that a stock is expensive relative to its fundamentals. Long-term Debt to Total Asset ratio is the ratio of total long-term debt to total assets. View historical data on Danieli & C. Officine Meccaniche SpA and its competitors. Danieli & C. Officine Meccaniche SpA's current LT-Debt-to-Total-Asset is 0.07. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Danieli & C. Officine Meccaniche SpA stock overvalued right now?
Based on GuruFocus' analysis, Danieli & C. Officine Meccaniche SpA (MIL:DAN) is currently considered Significantly Overvalued. The stock's GF Value™ is €30.27, compared to a current price of €65.80 — trading 117.4% above its estimated fair value. The current LT-Debt-to-Total-Asset is 0.07. Danieli & C. Officine Meccaniche SpA's overall GF Score™ is 67/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is LT-Debt-to-Total-Asset calculated?
LT-Debt-to-Total-Asset is calculated from a company's financial statements. For Danieli & C. Officine Meccaniche SpA (MIL:DAN), the current LT-Debt-to-Total-Asset is 0.07 as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.

Is Danieli & C. Officine Meccaniche SpA (MIL:DAN) Overvalued in 2026?

Based on GuruFocus' analysis, Danieli & C. Officine Meccaniche SpA stock appears to be overvalued. The current stock price of €65.80 is trading 117.4% above its estimated GF Value™ of €30.27. GuruFocus considers Danieli & C. Officine Meccaniche SpA to be Significantly Overvalued.

Key valuation signals for MIL:DAN:

  • LT-Debt-to-Total-Asset: 0.07
  • GF Value™: €30.27 vs. price of €65.80 (117.4% above fair value)
  • GF Score™: 67/100 with 6 warning signs

No single metric tells the full story. See the MIL:DAN stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.

Danieli & C. Officine Meccaniche SpA Business Description

Address Via Nazionale 41, Buttrio, Udine, ITA, 33042
Danieli & C. Officine Meccaniche SpA is an Italy-based company that is engaged in manufacturing and distribution of steel and other nonferrous metal products as well as plant building. The company operates through two segments, namely steelmaking and plant making. The Steelmaking segment manufactures ingots, forged bars, blooms, rolled bars, bar in coils and others. End customers primarily come from the mechanical, automotive, oil & gas, power generation and other sectors. The Plant Making segment designs and builds mines, pellet production plants, furnaces, rolling mills and other various plants and facilities. The company has a global presence, with Europe, Middle East and Far East being the three largest markets for the company.
67GF Score

Get the complete analysis for MIL:DAN

LT-Debt-to-Total-Asset is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.

€65.80
Price
€30.27
GF Value