What is Danieli & C. Officine Meccaniche SpA Pretax Margin %?
Danieli & C. Officine Meccaniche SpAMIL:DAN -8.06%70 Pretax Margin % is 10.40% as of Dec. 2025, which is 116% above its 10-year median of 4.82. GuruFocus rates MIL:DAN with a GF Score™ of 70/100 and a GF Value™ of €30.27 (Significantly Overvalued). The stock has 8 warning signs investors should review. Among 3,038 Industrial Products companies, Danieli & C. Officine Meccaniche SpA ranks better than 59.02% on this metric.
The pretax margin, as know as pretax profit margin, is widely used to measure the operating efficiency of a company before deducting taxes.
The pretax margin is sometimes preferred over the net margin as tax expenditures can make profitability comparisons between companies misleading.
It is a useful tool to compare companies operating in the same sector and less effective when comparing companies from other sectors as each industry generally has different operating expenses and sales patterns.
The long term trend of the pretax margin is a good indicator of the competitiveness and health of the business.
Danieli & C. Officine Meccaniche SpA Pretax Margin % Related Terms
Danieli & C. Officine Meccaniche SpA Pretax Margin % Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Danieli & C. Officine Meccaniche SpA Pretax Margin % Chart
MIL:DAN vs GEV, ETN, PH: Pretax Margin % Comparison
For the Specialty Industrial Machinery subindustry, Danieli & C. Officine Meccaniche SpA's Pretax Margin %, along with its competitors' market caps and Pretax Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Danieli & C. Officine Meccaniche SpA Pretax Margin % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Danieli & C. Officine Meccaniche SpA's Pretax Margin % distribution charts can be found below:
* The bar in red indicates where Danieli & C. Officine Meccaniche SpA's Pretax Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Danieli & C. Officine Meccaniche SpA (MIL:DAN) has a Pretax Margin % of 10.40% as of Dec. 2025. Pre-Tax margin is the ratio of total pre-tax income to net sales. View historical data on Danieli & C. Officine Meccaniche SpA and its competitors. This is 116% above median its historical median of 4.82. Over the past decade, Danieli & C. Officine Meccaniche SpA's Pretax Margin % has ranged from 2.40 to 8.52. According to the industry distribution chart, Danieli & C. Officine Meccaniche SpA ranks #1245 out of 3038 companies in the Industrial Products industry, placing it in the top 41%.
Is Danieli & C. Officine Meccaniche SpA's Pretax Margin % too high?
Danieli & C. Officine Meccaniche SpA's current Pretax Margin % of 10.40% is 116% above median its 10-year median of 4.82. Over the past 10 years, this metric has ranged from a low of 2.40 to a high of 8.52. The Industrial Products industry median Pretax Margin % is 5.85. Danieli & C. Officine Meccaniche SpA's value of 10.40% is 77.8% above this industry median. Based on the distribution chart, Danieli & C. Officine Meccaniche SpA ranks #1245 out of 3038 companies in the Industrial Products industry, which is above the industry midpoint. Overall, Danieli & C. Officine Meccaniche SpA has a GF Score™ of 70/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Danieli & C. Officine Meccaniche SpA's Pretax Margin % compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Danieli & C. Officine Meccaniche SpA ranks #1245 out of 3038 companies for Pretax Margin %. This puts Danieli & C. Officine Meccaniche SpA in the upper half of its industry. The industry median Pretax Margin % is 5.85. Danieli & C. Officine Meccaniche SpA's value of 10.40% is 77.8% above this benchmark. Historically, Danieli & C. Officine Meccaniche SpA's own Pretax Margin % has ranged from 2.40 to 8.52 over the past decade. While the company's 10-year median is 4.82 vs. the industry median of 5.85, Danieli & C. Officine Meccaniche SpA has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Pretax Margin % for an Industrial Products company?
The median Pretax Margin % among Industrial Products companies is 5.85, based on 3,038 companies in the industry. Companies in the top quartile (top 25%) have a Pretax Margin % significantly above this median, while those in the bottom quartile fall well below. However, Pretax Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Danieli & C. Officine Meccaniche SpA's current Pretax Margin % of 10.40% is 77.8% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Pretax Margin % mean?
A high Pretax Margin % can signal that a stock is expensive relative to its fundamentals. Pre-Tax margin is the ratio of total pre-tax income to net sales. View historical data on Danieli & C. Officine Meccaniche SpA and its competitors. For the Industrial Products industry, the median Pretax Margin % is 5.85 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Danieli & C. Officine Meccaniche SpA's current Pretax Margin % is 10.40%, which is 116% above median its own 10-year median of 4.82. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Danieli & C. Officine Meccaniche SpA stock overvalued right now?
Based on GuruFocus' analysis, Danieli & C. Officine Meccaniche SpA (MIL:DAN) is currently considered Significantly Overvalued. The stock's GF Value™ is €30.27, compared to a current price of €67.85 — trading 124.1% above its estimated fair value. The current Pretax Margin % is 10.40%, which is 116% above median its 10-year median of 4.82 and 77.8% above the Industrial Products industry median of 5.85. Danieli & C. Officine Meccaniche SpA's overall GF Score™ is 70/100 with 8 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Pretax Margin % calculated?
Pretax Margin % is calculated from a company's financial statements. For Danieli & C. Officine Meccaniche SpA (MIL:DAN), the current Pretax Margin % is 10.40% as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Danieli & C. Officine Meccaniche SpA (MIL:DAN) Overvalued in 2026?
Based on GuruFocus' analysis, Danieli & C. Officine Meccaniche SpA stock appears to be overvalued.
The current stock price of €67.85 is trading 124.1% above its estimated GF Value™ of €30.27.
GuruFocus considers Danieli & C. Officine Meccaniche SpA to be Significantly Overvalued.
Key valuation signals for MIL:DAN:
Pretax Margin %: 10.40% (116% above median its 10-year median of 4.82)
GF Value™: €30.27 vs. price of €67.85 (124.1% above fair value)
Industry Position: 77.8% above the Industrial Products median (#1245 of 3038)
No single metric tells the full story. See the MIL:DAN stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Danieli & C. Officine Meccaniche SpA Business Description
Danieli & C. Officine Meccaniche SpA is an Italy-based company that is engaged in manufacturing and distribution of steel and other nonferrous metal products as well as plant building. The company operates through two segments, namely steelmaking and plant making. The Steelmaking segment manufactures ingots, forged bars, blooms, rolled bars, bar in coils and others. End customers primarily come from the mechanical, automotive, oil & gas, power generation and other sectors. The Plant Making segment designs and builds mines, pellet production plants, furnaces, rolling mills and other various plants and facilities. The company has a global presence, with Europe, Middle East and Far East being the three largest markets for the company.
70GF Score
Get the complete analysis for MIL:DAN
Pretax Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
MIL:DAN has been successfully added to your 
