Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
FINE SINTER CoNGO:5994 48 Debt-to-EBITDA is 6.65 as of Mar. 2026, which is 77% above its 10-year median of 3.75. GuruFocus rates NGO:5994 with a GF Score™ of 48/100 and a GF Value™ of 円1,637.91. The stock has 3 warning signs investors should review. Among 2,335 Industrial Products companies, FINE SINTER Co ranks worse than 87.54% on this metric.
Debt-to-EBITDA measures a company's ability to pay off its debt.
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt. According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
The historical rank and industry rank for FINE SINTER Co's Debt-to-EBITDA or its related term are showing as below:
NGO:5994'
s Debt-to-EBITDA Range Over the Past 10 Years
Min: 2.16 Med: 3.75 Max: 18.97
Current: 7.93
During the past 13 years, the highest Debt-to-EBITDA Ratio of FINE SINTER Co was 18.97. The lowest was 2.16. And the median was 3.75.
NGO:5994's Debt-to-EBITDA is ranked worse than 87.54% of 2335
companies
in the Industrial Products industry
Industry Median: 1.66
vs NGO:5994: 7.93
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt.
According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
FINE SINTER Co Debt-to-EBITDA Related Terms
FINE SINTER Co Debt-to-EBITDA Historical Data
* Premium members only.
The historical data trend for FINE SINTER Co's Debt-to-EBITDA can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
NGO:5994 vs CRS, ATI, MLI: Debt-to-EBITDA Comparison
For the Metal Fabrication subindustry, FINE SINTER Co's Debt-to-EBITDA, along with its competitors' market caps and Debt-to-EBITDA data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
FINE SINTER Co Debt-to-EBITDA vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, FINE SINTER Co's Debt-to-EBITDA distribution charts can be found below:
* The bar in red indicates where FINE SINTER Co's Debt-to-EBITDA falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual Debt-to-EBITDA, the EBITDA of the last fiscal year is used. In calculating the annualized quarterly data,
the EBITDA data used here is four times the quarterly (Mar. 2026) EBITDA data.
FINE SINTER Co (NGO:5994) has a Debt-to-EBITDA of 6.65 as of Mar. 2026. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on FINE SINTER Co. This is 77% above median its historical median of 3.75. Over the past decade, FINE SINTER Co's Debt-to-EBITDA has ranged from 2.16 to 18.97. According to the industry distribution chart, FINE SINTER Co ranks #2044 out of 2335 companies in the Industrial Products industry, placing it in the top 87.5%.
Is FINE SINTER Co's Debt-to-EBITDA too high?
FINE SINTER Co's current Debt-to-EBITDA of 6.65 is 77% above median its 10-year median of 3.75. Over the past 10 years, this metric has ranged from a low of 2.16 to a high of 18.97. The Industrial Products industry median Debt-to-EBITDA is 1.66. FINE SINTER Co's value of 6.65 is 300.6% above this industry median. Based on the distribution chart, FINE SINTER Co ranks #2044 out of 2335 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, FINE SINTER Co has a GF Score™ of 48/100, reflecting its overall financial health beyond just this single metric.
How does FINE SINTER Co's Debt-to-EBITDA compare to CRS and ATI?
According to the Industrial Products industry distribution chart, FINE SINTER Co ranks #2044 out of 2335 companies for Debt-to-EBITDA. This places FINE SINTER Co in the lower half of its industry. The industry median Debt-to-EBITDA is 1.66. FINE SINTER Co's value of 6.65 is 300.6% above this benchmark. Historically, FINE SINTER Co's own Debt-to-EBITDA has ranged from 2.16 to 18.97 over the past decade. While the company's 10-year median is 3.75 vs. the industry median of 1.66, FINE SINTER Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-EBITDA for an Industrial Products company?
The median Debt-to-EBITDA among Industrial Products companies is 1.66, based on 2,335 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-EBITDA significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-EBITDA should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. FINE SINTER Co's current Debt-to-EBITDA of 6.65 is 300.6% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-EBITDA mean?
A high Debt-to-EBITDA can signal that a stock is expensive relative to its fundamentals. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on FINE SINTER Co. For the Industrial Products industry, the median Debt-to-EBITDA is 1.66 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. FINE SINTER Co's current Debt-to-EBITDA is 6.65, which is 77% above median its own 10-year median of 3.75. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is FINE SINTER Co stock overvalued right now?
FINE SINTER Co (NGO:5994) has a current Debt-to-EBITDA of 6.65. The stock's GF Value™ is 円1,637.91, compared to a current price of 円1,300.00 — trading 20.6% below its estimated fair value. The current Debt-to-EBITDA is 6.65, which is 77% above median its 10-year median of 3.75 and 300.6% above the Industrial Products industry median of 1.66. FINE SINTER Co's overall GF Score™ is 48/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-EBITDA calculated?
Debt-to-EBITDA is calculated from a company's financial statements. For FINE SINTER Co (NGO:5994), the current Debt-to-EBITDA is 6.65 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is FINE SINTER Co (NGO:5994) Overvalued in 2026?
Based on GuruFocus' analysis, FINE SINTER Co stock appears to be undervalued.
The current stock price of 円1,300.00 is trading 20.6% below its estimated GF Value™ of 円1,637.91.
Key valuation signals for NGO:5994:
Debt-to-EBITDA: 6.65 (77% above median its 10-year median of 3.75)
GF Value™: 円1,637.91 vs. price of 円1,300.00 (20.6% below fair value)
Industry Position: 300.6% above the Industrial Products median (#2044 of 2335)
No single metric tells the full story. See the NGO:5994 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
FINE SINTER Co Ltd is specialized in designing, manufacturing, and marketing products based on powder metallurgy technology. The company serves approximately 80% of its entire products in the automotive industry. Its products are used in many units of automotive; engine, transmission, steering, and sensors. In addition, the company also produces composite materials such as brake linings for trains, contact strips for current collectors and sealing materials.
48GF Score
Get the complete analysis for NGO:5994
Debt-to-EBITDA is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NGO:5994 has been successfully added to your 
