FINE SINTER Co (NGO:5994) Dividend Payout Ratio: 0.00 (As of Mar. 2026)

What is FINE SINTER Co Dividend Payout Ratio?

FINE SINTER Co NGO:5994 47 Dividend Payout Ratio is 0.00 as of Mar. 2026. GuruFocus rates NGO:5994 with a GF Score™ of 47/100 and a GF Value™ of 円1,656.39. The stock has 5 warning signs investors should review. Among 1,719 Industrial Products companies, FINE SINTER Co ranks worse than 58173.3% on this metric.

The Dividend Payout Ratio is the measure of dividends paid out to shareholders relative to the company's net income. It is calculated as the Dividends per Share divided by the Earnings per Share (Diluted) during the same time period. FINE SINTER Co's Dividend Payout Ratio for the months ended in Mar. 2026 was 0.00.

The historical rank and industry rank for FINE SINTER Co's Dividend Payout Ratio or its related term are showing as below:

During the past 13 years, the highest Dividend Payout Ratio of FINE SINTER Co was 11.81. The lowest was 0.28. And the median was 0.53.

NGO:5994's Dividend Payout Ratio is not ranked ^*
in the Industrial Products industry.
Industry Median: 0.37
* Ranked among companies with meaningful Dividend Payout Ratio only.

As of today (2026-07-06), the Dividend Yield % of FINE SINTER Co is 0.00%.

During the past 13 years, the highest Trailing Annual Dividend Yield of FINE SINTER Co was 5.54%. The lowest was 0.52%. And the median was 2.86%.

FINE SINTER Co's Dividends per Share for the months ended in Mar. 2026 was 円15.00.

During the past 12 months, FINE SINTER Co's average Dividends Per Share Growth Rate was 25.00% per year. During the past 3 years, the average Dividends Per Share Growth Rate was 35.70% per year. During the past 5 years, the average Dividends Per Share Growth Rate was 7.50% per year. During the past 10 years, the average Dividends Per Share Growth Rate was -14.80% per year.

During the past 13 years, the highest 3-Year average Dividends Per Share Growth Rate of FINE SINTER Co was 35.70% per year. The lowest was -47.70% per year. And the median was 3.60% per year.

The growth rate is calculated with least square regression.

For more information regarding to dividend, please check our Dividend Page.

* Please note that "special dividend" is not included in the calculation of dividend per share and related fields.

FINE SINTER Co (NGO:5994) Dividend Payout Ratio Explanation

In dividends investing, Dividend Payout Ratio and Dividend Growth Rate are the two most important variables for consideration. A lower payout ratio may indicate that the company has more room to increase its dividends.

FINE SINTER Co Dividend Payout Ratio Related Terms

FINE SINTER Co Dividend Payout Ratio Historical Data

* Premium members only.

The historical data trend for FINE SINTER Co's Dividend Payout Ratio can be seen below:

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

FINE SINTER Co Dividend Payout Ratio Chart

FINE SINTER Co Annual Data

Trend

Mar17

Mar18

Mar19

Mar20

Mar21

Mar22

Mar23

Mar24

Mar25

Mar26

Dividend Payout Ratio

Get a 7-Day Free Trial

0.77

0.00

11.81

0.00

FINE SINTER Co Semi-Annual Data
	Sep16	Mar17	Sep17	Mar18	Sep18	Mar19	Sep19	Mar20	Sep20	Mar21	Sep21	Mar22	Sep22	Mar23	Sep23	Mar24	Sep24	Mar25	Sep25	Mar26
Dividend Payout Ratio	Get a 7-Day Free Trial															0.00	0.00	0.05	0.05	0.00

NGO:5994 vs CRS, ATI, MLI: Dividend Payout Ratio Comparison

For the Metal Fabrication subindustry, FINE SINTER Co's Dividend Payout Ratio, along with its competitors' market caps and Dividend Payout Ratio data, can be viewed below:

* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.

FINE SINTER Co Dividend Payout Ratio vs Industrial Products Industry

For the Industrial Products industry and Industrials sector, FINE SINTER Co's Dividend Payout Ratio distribution charts can be found below:

* The bar in red indicates where FINE SINTER Co's Dividend Payout Ratio falls into.

Save Embed

47GF Score

FINE SINTER Co Ltd NGO:5994

Dividend Payout Ratio is just one metric. See GF Score™, valuation, warning signs, and more.

View Full Analysis

FINE SINTER Co Dividend Payout Ratio Calculation

FINE SINTER Co's Dividend Payout Ratio for the fiscal year that ended in Mar. 2026 is calculated as

Dividend Payout Ratio	=	Dividends per Share (A: Mar. 2026 )	/	EPS without NRI (A: Mar. 2026 )
	=	25	/	-194
	=	N/A

FINE SINTER Co's Dividend Payout Ratio for the quarter that ended in Mar. 2026 is calculated as

Dividend Payout Ratio	=	Dividends per Share (Q: Mar. 2026 )	/	EPS without NRI (Q: Mar. 2026 )
	=	15	/	-395.863
	=	N/A

Frequently Asked Questions Learn more about Dividend Payout Ratio →

What does a Dividend Payout Ratio of 0.00 mean?

FINE SINTER Co (NGO:5994) has a Dividend Payout Ratio of 0.00 as of Mar. 2026. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on FINE SINTER Co and its competitors. Over the past decade, FINE SINTER Co's Dividend Payout Ratio has ranged from 0.28 to 11.81. According to the industry distribution chart, FINE SINTER Co ranks #999999 out of 1719 companies in the Industrial Products industry.

Is FINE SINTER Co's Dividend Payout Ratio too high?

FINE SINTER Co's current Dividend Payout Ratio is 0.00. Over the past 10 years, this metric has ranged from a low of 0.28 to a high of 11.81. Based on the distribution chart, FINE SINTER Co ranks #999999 out of 1719 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, FINE SINTER Co has a GF Score™ of 47/100, reflecting its overall financial health beyond just this single metric.

How does FINE SINTER Co's Dividend Payout Ratio compare to CRS and ATI?

According to the Industrial Products industry distribution chart, FINE SINTER Co ranks #999999 out of 1719 companies for Dividend Payout Ratio. This places FINE SINTER Co in the lower half of its industry. The industry median Dividend Payout Ratio is 0.37. Historically, FINE SINTER Co's own Dividend Payout Ratio has ranged from 0.28 to 11.81 over the past decade. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.

What is a good Dividend Payout Ratio for an Industrial Products company?

The median Dividend Payout Ratio among Industrial Products companies is 0.37, based on 1,719 companies in the industry. Companies in the top quartile (top 25%) have a Dividend Payout Ratio significantly above this median, while those in the bottom quartile fall well below. However, Dividend Payout Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.

What does a high Dividend Payout Ratio mean?

A high Dividend Payout Ratio can signal that a stock is expensive relative to its fundamentals. Dividend payout ratio is the percent of company earnings paid out as dividends. View historical data on FINE SINTER Co and its competitors. For the Industrial Products industry, the median Dividend Payout Ratio is 0.37 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. FINE SINTER Co's current Dividend Payout Ratio is 0.00. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.

Is FINE SINTER Co stock overvalued right now?

FINE SINTER Co (NGO:5994) has a current Dividend Payout Ratio of 0.00. The stock's GF Value™ is 円1,656.39, compared to a current price of 円1,300.00 — trading 21.5% below its estimated fair value. The current Dividend Payout Ratio is 0.00. FINE SINTER Co's overall GF Score™ is 47/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.

How is Dividend Payout Ratio calculated?

Dividend Payout Ratio is calculated from a company's financial statements. For FINE SINTER Co (NGO:5994), the current Dividend Payout Ratio is 0.00 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.

Is FINE SINTER Co (NGO:5994) Overvalued in 2026?

Based on GuruFocus' analysis, FINE SINTER Co stock appears to be undervalued. The current stock price of 円1,300.00 is trading 21.5% below its estimated GF Value™ of 円1,656.39.

Key valuation signals for NGO:5994:

Dividend Payout Ratio: 0.00
GF Value™: 円1,656.39 vs. price of 円1,300.00 (21.5% below fair value)
GF Score™: 47/100 with 5 warning signs

No single metric tells the full story. See the NGO:5994 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.

FINE SINTER Co Business Description

Industry Industrials Industrial Products

Comparable Companies TSE:3024 TSE:5603 NGO:6111 TSE:6138 TSE:5987 TSE:5858 TSE:6150 TSE:6433 TSE:6497 TSE:6998 CRS ATI MLI SHSE:688409 XTER:NDA CMC ESAB SHSE:603308 SZSE:000039 XBRU:VIO

Other Exchanges 5994:Japan

Address 1189-11,Nishinohora, Akechi-cho, Kasugai, Aichi, JPN, 480-0303

Website http://www.fine-sinter.com

FINE SINTER Co Ltd is specialized in designing, manufacturing, and marketing products based on powder metallurgy technology. The company serves approximately 80% of its entire products in the automotive industry. Its products are used in many units of automotive; engine, transmission, steering, and sensors. In addition, the company also produces composite materials such as brake linings for trains, contact strips for current collectors and sealing materials.

47GF Score

Get the complete analysis for NGO:5994

Dividend Payout Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.

円1,300.00

Price

円1,656.39

GF Value

View NGO:5994 Analysis

See Dividend Payout Ratio data for all stocks →