FINE SINTER CoNGO:5994 51 Quick Ratio is 0.72 as of Mar. 2026, which is 1% below its 10-year median of 0.73. GuruFocus rates NGO:5994 with a GF Score™ of 51/100 and a GF Value™ of 円1,776.13. The stock has 5 warning signs investors should review. Among 3,071 Industrial Products companies, FINE SINTER Co ranks worse than 85.31% on this metric.
The quick ratio measures a company's ability to meet its short-term obligations with its most liquid assets. It is calculated as a company's Total Current Assets excludes Total Inventories divides by its Total Current Liabilities. FINE SINTER Co's quick ratio for the quarter that ended in Mar. 2026 was 0.72.
FINE SINTER Co has a quick ratio of 0.72. It indicates that the company cannot currently fully pay back its current liabilities.
The historical rank and industry rank for FINE SINTER Co's Quick Ratio or its related term are showing as below:
NGO:5994'
s Quick Ratio Range Over the Past 10 Years
Min: 0.61 Med: 0.73 Max: 0.78
Current: 0.72
During the past 13 years, FINE SINTER Co's highest Quick Ratio was 0.78. The lowest was 0.61. And the median was 0.73.
NGO:5994's Quick Ratio is ranked worse than 85.31% of 3071
companies
in the Industrial Products industry
Industry Median: 1.39
vs NGO:5994: 0.72
FINE SINTER Co (NGO:5994) Quick Ratio Explanation
The quick ratio is more conservative than the Current Ratio because it excludes inventories from current assets. The ratio derives its name presumably from the fact that assets such as cash and marketable securities are quick sources of cash. Inventories generally take time to be converted into cash, and if they have to be sold quickly, the company may have to accept a lower price than book value of these inventories. As a result, they are justifiably excluded from assets that are ready sources of immediate cash.
In general, low or decreasing quick ratios generally suggest that a company is over-leveraged, struggling to maintain or grow sales, paying bills too quickly or collecting receivables too slowly. On the other hand, a high or increasing quick ratio generally indicates that a company is experiencing solid top-line growth, quickly converting receivables into cash, and easily able to cover its financial obligations. Such companies often have faster inventory turnover and cash conversion cycles.
The higher the quick ratio, the better the company's liquidity position.
FINE SINTER Co Quick Ratio Related Terms
FINE SINTER Co Quick Ratio Historical Data
* Premium members only.
The historical data trend for FINE SINTER Co's Quick Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Metal Fabrication subindustry, FINE SINTER Co's Quick Ratio, along with its competitors' market caps and Quick Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
FINE SINTER Co Quick Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, FINE SINTER Co's Quick Ratio distribution charts can be found below:
* The bar in red indicates where FINE SINTER Co's Quick Ratio falls into.
The quick ratio measures a company's ability to meet its short-term obligations with its most liquid assets. For this reason, the ratio excludes inventories from current assets.
FINE SINTER Co's Quick Ratio for the fiscal year that ended in Mar. 2026 is calculated as
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
FINE SINTER Co (NGO:5994) has a Quick Ratio of 0.72 as of Mar. 2026. Quick ratio is the ratio of current assets less inventory to current liabilities. View historical data on FINE SINTER Co and its competitors. This is near median its historical median of 0.73. Over the past decade, FINE SINTER Co's Quick Ratio has ranged from 0.61 to 0.78. According to the industry distribution chart, FINE SINTER Co ranks #2620 out of 3071 companies in the Industrial Products industry, placing it in the top 85.3%.
Is FINE SINTER Co's Quick Ratio too high?
FINE SINTER Co's current Quick Ratio of 0.72 is near median its 10-year median of 0.73. Over the past 10 years, this metric has ranged from a low of 0.61 to a high of 0.78. The Industrial Products industry median Quick Ratio is 1.39. FINE SINTER Co's value of 0.72 is 48.2% below this industry median. Based on the distribution chart, FINE SINTER Co ranks #2620 out of 3071 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, FINE SINTER Co has a GF Score™ of 51/100, reflecting its overall financial health beyond just this single metric.
How does FINE SINTER Co's Quick Ratio compare to CRS and ATI?
According to the Industrial Products industry distribution chart, FINE SINTER Co ranks #2620 out of 3071 companies for Quick Ratio. This places FINE SINTER Co in the lower half of its industry. The industry median Quick Ratio is 1.39. FINE SINTER Co's value of 0.72 is 48.2% below this benchmark. Historically, FINE SINTER Co's own Quick Ratio has ranged from 0.61 to 0.78 over the past decade. While the company's 10-year median is 0.73 vs. the industry median of 1.39, FINE SINTER Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Quick Ratio for an Industrial Products company?
The median Quick Ratio among Industrial Products companies is 1.39, based on 3,071 companies in the industry. Companies in the top quartile (top 25%) have a Quick Ratio significantly above this median, while those in the bottom quartile fall well below. However, Quick Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. FINE SINTER Co's current Quick Ratio of 0.72 is 48.2% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Quick Ratio mean?
A high Quick Ratio can signal that a stock is expensive relative to its fundamentals. Quick ratio is the ratio of current assets less inventory to current liabilities. View historical data on FINE SINTER Co and its competitors. For the Industrial Products industry, the median Quick Ratio is 1.39 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. FINE SINTER Co's current Quick Ratio is 0.72, which is near median its own 10-year median of 0.73. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is FINE SINTER Co stock overvalued right now?
FINE SINTER Co (NGO:5994) has a current Quick Ratio of 0.72. The stock's GF Value™ is 円1,776.13, compared to a current price of 円1,300.00 — trading 26.8% below its estimated fair value. The current Quick Ratio is 0.72, which is near median its 10-year median of 0.73 and 48.2% below the Industrial Products industry median of 1.39. FINE SINTER Co's overall GF Score™ is 51/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Quick Ratio calculated?
Quick Ratio is calculated from a company's financial statements. For FINE SINTER Co (NGO:5994), the current Quick Ratio is 0.72 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is FINE SINTER Co (NGO:5994) Overvalued in 2026?
Based on GuruFocus' analysis, FINE SINTER Co stock appears to be undervalued.
The current stock price of 円1,300.00 is trading 26.8% below its estimated GF Value™ of 円1,776.13.
Key valuation signals for NGO:5994:
Quick Ratio: 0.72 (near median its 10-year median of 0.73)
GF Value™: 円1,776.13 vs. price of 円1,300.00 (26.8% below fair value)
Industry Position: 48.2% below the Industrial Products median (#2620 of 3071)
No single metric tells the full story. See the NGO:5994 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
FINE SINTER Co Ltd is specialized in designing, manufacturing, and marketing products based on powder metallurgy technology. The company serves approximately 80% of its entire products in the automotive industry. Its products are used in many units of automotive; engine, transmission, steering, and sensors. In addition, the company also produces composite materials such as brake linings for trains, contact strips for current collectors and sealing materials.
51GF Score
Get the complete analysis for NGO:5994
Quick Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NGO:5994 has been successfully added to your 
