FINE SINTER Co (NGO:5994) 5-Year Yield-on-Cost %: 0.00 (As of Aug. 05, 2026)

Author: Vera Yuan Vera Yuan
Vera Yuan
Vera Yuan
Director of Data and Quant Analytics at GuruFocus
Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Reviewed by: Charlie Tian Charlie Tian
Charlie Tian
Charlie Tian
Founder & CEO of GuruFocus
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.

NGO:5994 FINE SINTER Co Ltd NGO:5994
48 GF Score
Price 円1,300.00
GF Value 円1,804.22
! 5 Warning Signs
View Full Analysis

What is FINE SINTER Co 5-Year Yield-on-Cost %?

FINE SINTER Co NGO:5994 48 5-Year Yield-on-Cost % is 0.00 as of Aug. 05, 2026. GuruFocus rates NGO:5994 with a GF Score™ of 48/100 and a GF Value™ of 円1,804.22. The stock has 5 warning signs investors should review. Among 1,912 Industrial Products companies, FINE SINTER Co ranks better than 55.96% on this metric.

FINE SINTER Co's yield on cost for the quarter that ended in Mar. 2026 was 0.00.


The historical rank and industry rank for FINE SINTER Co's 5-Year Yield-on-Cost % or its related term are showing as below:


During the past 13 years, FINE SINTER Co's highest Yield on Cost was 7.95. The lowest was 0.00. And the median was 4.06.


NGO:5994's 5-Year Yield-on-Cost % is not ranked *
in the Industrial Products industry.
Industry Median: 1.94
* Ranked among companies with meaningful 5-Year Yield-on-Cost % only.

FINE SINTER Co  (NGO:5994) 5-Year Yield-on-Cost % Explanation

Of course the risk here is that the company may not raise its dividends as it did before. The key is to select the companies that can consistently raise its dividends. Usually companies with long history of raising dividends tend to do so.


FINE SINTER Co 5-Year Yield-on-Cost % Related Terms


NGO:5994 vs CRS, ATI, MLI: 5-Year Yield-on-Cost % Comparison

For the Metal Fabrication subindustry, FINE SINTER Co's 5-Year Yield-on-Cost %, along with its competitors' market caps and 5-Year Yield-on-Cost % data, can be viewed below:

* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.


FINE SINTER Co 5-Year Yield-on-Cost % vs Industrial Products Industry

For the Industrial Products industry and Industrials sector, FINE SINTER Co's 5-Year Yield-on-Cost % distribution charts can be found below:

* The bar in red indicates where FINE SINTER Co's 5-Year Yield-on-Cost % falls into.


NGO:5994
48GF Score
FINE SINTER Co Ltd NGO:5994
5-Year Yield-on-Cost % is just one metric. See GF Score™, valuation, warning signs, and more.
View Full Analysis

FINE SINTER Co 5-Year Yield-on-Cost % Calculation

Dividend Yield % and dividend growth of a stock is an important factor for income investors. But if company A raises its dividend constantly faster than company B, company A's future dividend yield might be much higher than Company B's even if their yields are the same now and their stock prices do not change.

Yield on Cost assumes that you buy and the stock today, and hold it for 5 years. If the company raises it dividends at the same rate as it did over the past 5 years, the dividends investors receive annually in 5 years relative to the stock price today.

Therefore, Yield-on-Cost of FINE SINTER Co is calculated as

Yield-on-Cost=Dividend Yield %*(1+Dividend Growth Rate)^5
Frequently Asked Questions Learn more about 5-Year Yield-on-Cost % →
What does a 5-Year Yield-on-Cost % of 0.00 mean?
FINE SINTER Co (NGO:5994) has a 5-Year Yield-on-Cost % of 0.00 as of Aug. 05, 2026. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on FINE SINTER Co and its competitors. According to the industry distribution chart, FINE SINTER Co ranks #842 out of 1912 companies in the Industrial Products industry, placing it in the top 44%.
Is FINE SINTER Co's 5-Year Yield-on-Cost % too high?
FINE SINTER Co's current 5-Year Yield-on-Cost % is 0.00. Based on the distribution chart, FINE SINTER Co ranks #842 out of 1912 companies in the Industrial Products industry, which is above the industry midpoint. Overall, FINE SINTER Co has a GF Score™ of 48/100, reflecting its overall financial health beyond just this single metric.
How does FINE SINTER Co's 5-Year Yield-on-Cost % compare to CRS and ATI?
According to the Industrial Products industry distribution chart, FINE SINTER Co ranks #842 out of 1912 companies for 5-Year Yield-on-Cost %. This puts FINE SINTER Co in the upper half of its industry. The industry median 5-Year Yield-on-Cost % is 1.94. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good 5-Year Yield-on-Cost % for an Industrial Products company?
The median 5-Year Yield-on-Cost % among Industrial Products companies is 1.94, based on 1,912 companies in the industry. Companies in the top quartile (top 25%) have a 5-Year Yield-on-Cost % significantly above this median, while those in the bottom quartile fall well below. However, 5-Year Yield-on-Cost % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high 5-Year Yield-on-Cost % mean?
A high 5-Year Yield-on-Cost % can signal that a stock is expensive relative to its fundamentals. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on FINE SINTER Co and its competitors. For the Industrial Products industry, the median 5-Year Yield-on-Cost % is 1.94 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. FINE SINTER Co's current 5-Year Yield-on-Cost % is 0.00. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is FINE SINTER Co stock overvalued right now?
FINE SINTER Co (NGO:5994) has a current 5-Year Yield-on-Cost % of 0.00. The stock's GF Value™ is 円1,804.22, compared to a current price of 円1,300.00 — trading 27.9% below its estimated fair value. The current 5-Year Yield-on-Cost % is 0.00. FINE SINTER Co's overall GF Score™ is 48/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is 5-Year Yield-on-Cost % calculated?
5-Year Yield-on-Cost % is calculated from a company's financial statements. For FINE SINTER Co (NGO:5994), the current 5-Year Yield-on-Cost % is 0.00 as of Aug. 05, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.

Is FINE SINTER Co (NGO:5994) Overvalued in 2026?

Based on GuruFocus' analysis, FINE SINTER Co stock appears to be undervalued. The current stock price of 円1,300.00 is trading 27.9% below its estimated GF Value™ of 円1,804.22.

Key valuation signals for NGO:5994:

  • 5-Year Yield-on-Cost %: 0.00
  • GF Value™: 円1,804.22 vs. price of 円1,300.00 (27.9% below fair value)
  • GF Score™: 48/100 with 5 warning signs

No single metric tells the full story. See the NGO:5994 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.


FINE SINTER Co Business Description

Other Exchanges 5994:Japan
Address 1189-11,Nishinohora, Akechi-cho, Kasugai, Aichi, JPN, 480-0303
FINE SINTER Co Ltd is specialized in designing, manufacturing, and marketing products based on powder metallurgy technology. The company serves approximately 80% of its entire products in the automotive industry. Its products are used in many units of automotive; engine, transmission, steering, and sensors. In addition, the company also produces composite materials such as brake linings for trains, contact strips for current collectors and sealing materials.
48GF Score

Get the complete analysis for NGO:5994

5-Year Yield-on-Cost % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.

円1,300.00
Price
円1,804.22
GF Value