FINE SINTER Co (NGO:5994) Piotroski F-Score: 6 (As of Jun. 28, 2026) — Near Median


NGO:5994 FINE SINTER Co Ltd NGO:5994
51 GF Score
Price 円1,300.00
GF Value 円1,776.13
! 5 Warning Signs
View Full Analysis

What is FINE SINTER Co Piotroski F-Score?

FINE SINTER Co NGO:5994 51 Piotroski F-Score is 6 as of Jun. 28, 2026, which is at its 10-year median of 6.00. GuruFocus rates NGO:5994 with a GF Score™ of 51/100 and a GF Value™ of 円1,776.13. The stock has 5 warning signs investors should review. Among 2,972 Industrial Products companies, FINE SINTER Co ranks better than 75.4% on this metric.

The zones of discrimination were as such:

Good or high score = 7, 8, 9
Bad or low score = 0, 1, 2, 3

FINE SINTER Co has an F-score of 6 indicating the company's financial situation is typical for a stable company.

The historical rank and industry rank for FINE SINTER Co's Piotroski F-Score or its related term are showing as below:

NGO:5994' s Piotroski F-Score Range Over the Past 10 Years
Min: 4   Med: 6   Max: 9
Current: 6

During the past 13 years, the highest Piotroski F-Score of FINE SINTER Co was 9. The lowest was 4. And the median was 6.

FINE SINTER Co  (NGO:5994) Piotroski F-Score Explanation

The developer of the system is Joseph D. Piotroski is relatively unknown accounting professor who shuns publicity and rarely gives interviews.

He graduated from the University of Illinois with a B.S. in accounting in 1989, received an M.B.A. from Indiana University in 1994. Five years later, in 1999, after earning a Ph.D. in accounting from the University of Michigan, he became an associate professor of accounting at the University of Chicago.

In 2000, he wrote a research paper called "Value Investing: The Use of Historical Financial Statement Information to Separate Winners from Losers" (pdf).

He wanted to see if he can develop a system (using a simple nine-point scoring system) that can increase the returns of a strategy of investing in low price to book (referred to in the paper as high book to market) value companies.

What he found was something that exceeded his most optimistic expectations.

Buying only those companies that scored highest (8 or 9) on his nine-point scale, or F-Score as he called it, over the 20 year period from 1976 to 1996 led to an average out-performance over the market of 13.4%.

Even more impressive were the results of a strategy of investing in the highest F-Score companies (8 or 9) and shorting companies with the lowest F-Score (0 or 1).

Over the same period from 1976 to 1996 (20 years) this strategy led to an average yearly return of 23%, substantially outperforming the average S&P 500 index return of 15.83% over the same period.


FINE SINTER Co Piotroski F-Score Related Terms


FINE SINTER Co Piotroski F-Score Historical Data

* Premium members only.

The historical data trend for FINE SINTER Co's Piotroski F-Score can be seen below:

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

FINE SINTER Co Piotroski F-Score Chart

FINE SINTER Co Annual Data
Trend Mar17 Mar18 Mar19 Mar20 Mar21 Mar22 Mar23 Mar24 Mar25 Mar26
Piotroski F-Score
Get a 7-Day Free Trial Premium Member Only Premium Member Only 9.00 4.00 6.00 6.00 6.00

FINE SINTER Co Semi-Annual Data
Sep16 Mar17 Sep17 Mar18 Sep18 Mar19 Sep19 Mar20 Sep20 Mar21 Sep21 Mar22 Sep22 Mar23 Sep23 Mar24 Sep24 Mar25 Sep25 Mar26
Piotroski F-Score Get a 7-Day Free Trial Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only 6.00 0.00 6.00 0.00 6.00

NGO:5994 vs ATI, CRS, MLI: Piotroski F-Score Comparison

For the Metal Fabrication subindustry, FINE SINTER Co's Piotroski F-Score, along with its competitors' market caps and Piotroski F-Score data, can be viewed below:

* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.


FINE SINTER Co Piotroski F-Score vs Industrial Products Industry

For the Industrial Products industry and Industrials sector, FINE SINTER Co's Piotroski F-Score distribution charts can be found below:

* The bar in red indicates where FINE SINTER Co's Piotroski F-Score falls into.


NGO:5994
51GF Score
FINE SINTER Co Ltd NGO:5994
Piotroski F-Score is just one metric. See GF Score™, valuation, warning signs, and more.
View Full Analysis

How is the Piotroski F-Score calculated?

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

This Year (Mar26) TTM:Last Year (Mar25) TTM:
Net Income was 円-2,415 Mil.
Cash Flow from Operations was 円4,759 Mil.
Revenue was 円46,207 Mil.
Gross Profit was 円6,549 Mil.
Average Total Assets from the begining of this year (Mar25)
to the end of this year (Mar26) was (47835.024 + 46378.064) / 2 = 円47106.544 Mil.
Total Assets at the begining of this year (Mar25) was 円47,835 Mil.
Long-Term Debt & Capital Lease Obligation was 円5,952 Mil.
Total Current Assets was 円22,405 Mil.
Total Current Liabilities was 円21,972 Mil.
Net Income was 円-207 Mil.

Revenue was 円42,720 Mil.
Gross Profit was 円5,753 Mil.
Average Total Assets from the begining of last year (Mar24)
to the end of last year (Mar25) was (50196.361 + 47835.024) / 2 = 円49015.6925 Mil.
Total Assets at the begining of last year (Mar24) was 円50,196 Mil.
Long-Term Debt & Capital Lease Obligation was 円5,690 Mil.
Total Current Assets was 円21,363 Mil.
Total Current Liabilities was 円21,422 Mil.

*Note: If the latest quarterly/semi-annual/annual total assets data is 0, then we will use previous quarterly/semi-annual/annual data for all the items in the balance sheet.

Profitability

Question 1. Return on Assets (ROA)

Net income before extraordinary items for the year divided by Total Assets at the beginning of the year.

Score 1 if positive, 0 if negative.

FINE SINTER Co's current Net Income (TTM) was -2,415. ==> Negative ==> Score 0.

Question 2. Cash Flow Return on Assets (CFROA)

Net cash flow from operating activities (operating cash flow) divided by Total Assets at the beginning of the year.

Score 1 if positive, 0 if negative.

FINE SINTER Co's current Cash Flow from Operations (TTM) was 4,759. ==> Positive ==> Score 1.

Question 3. Change in Return on Assets

Compare this year's return on assets (1) to last year's return on assets.

Score 1 if it's higher, 0 if it's lower.

ROA (This Year)=Net Income/Total Assets (Mar25)
=-2414.973/47835.024
=-0.05048546

ROA (Last Year)=Net Income/Total Assets (Mar24)
=-206.537/50196.361
=-0.00411458

FINE SINTER Co's return on assets of this year was -0.05048546. FINE SINTER Co's return on assets of last year was -0.00411458. ==> Last year is higher ==> Score 0.

Question 4. Quality of Earnings (Accrual)

Compare Cash flow return on assets (2) to return on assets (1)

Score 1 if CFROA > ROA, 0 if CFROA <= ROA.

FINE SINTER Co's current Net Income (TTM) was -2,415. FINE SINTER Co's current Cash Flow from Operations (TTM) was 4,759. ==> 4,759 > -2,415 ==> CFROA > ROA ==> Score 1.

Funding

Question 5. Change in Gearing or Leverage

Compare this year's gearing (long-term debt divided by average total assets) to last year's gearing.

Score 0 if this year's gearing is higher, 1 otherwise.

Gearing (This Year: Mar26)=Long-Term Debt & Capital Lease Obligation/Average Total Assets from Mar25 to Mar26
=5951.732/47106.544
=0.12634618

Gearing (Last Year: Mar25)=Long-Term Debt & Capital Lease Obligation/Average Total Assets from Mar24 to Mar25
=5690.393/49015.6925
=0.11609329

FINE SINTER Co's gearing of this year was 0.12634618. FINE SINTER Co's gearing of last year was 0.11609329. ==> Last year is lower than this year ==> Score 0.

Question 6. Change in Working Capital (Liquidity)

Compare this year's current ratio (current assets divided by current liabilities) to last year's current ratio.

Score 1 if this year's current ratio is higher, 0 if it's lower

Current Ratio (This Year: Mar26)=Total Current Assets/Total Current Liabilities
=22404.583/21971.915
=1.01969187

Current Ratio (Last Year: Mar25)=Total Current Assets/Total Current Liabilities
=21362.837/21421.606
=0.99725655

FINE SINTER Co's current ratio of this year was 1.01969187. FINE SINTER Co's current ratio of last year was 0.99725655. ==> This year's current ratio is higher. ==> Score 1.

Question 7. Change in Shares in Issue

Compare the number of shares in issue this year, to the number in issue last year.

Score 0 if there is larger number of shares in issue this year, 1 otherwise.

FINE SINTER Co's number of shares in issue this year was 4.279. FINE SINTER Co's number of shares in issue last year was 4.282. ==> There is smaller number of shares in issue this year, or the same. ==> Score 1.

Efficiency

Question 8. Change in Gross Margin

Compare this year's gross margin (Gross Profit divided by sales) to last year's.

Score 1 if this year's gross margin is higher, 0 if it's lower.

Gross Margin (This Year: TTM)=Gross Profit/Revenue
=6549.003/46206.754
=0.14173259

Gross Margin (Last Year: TTM)=Gross Profit/Revenue
=5752.752/42720.389
=0.13466057

FINE SINTER Co's gross margin of this year was 0.14173259. FINE SINTER Co's gross margin of last year was 0.13466057. ==> This year's gross margin is higher. ==> Score 1.

Question 9. Change in asset turnover

Compare this year's asset turnover (total sales for the year divided by total assets at the beginning of the year) to last year's asset turnover ratio.

Score 1 if this year's asset turnover ratio is higher, 0 if it's lower

Asset Turnover (This Year)=Revenue/Total Assets at the Beginning of This Year (Mar25)
=46206.754/47835.024
=0.96596072

Asset Turnover (Last Year)=Revenue/Total Assets at the Beginning of Last Year (Mar24)
=42720.389/50196.361
=0.85106546

FINE SINTER Co's asset turnover of this year was 0.96596072. FINE SINTER Co's asset turnover of last year was 0.85106546. ==> This year's asset turnover is higher. ==> Score 1.

Evaluation

Piotroski F-Score= Que. 1+ Que. 2+ Que. 3+Que. 4+Que. 5+Que. 6+Que. 7+Que. 8+Que. 9
=0+1+0+1+0+1+1+1+1
=6

Good or high score = 7, 8, 9
Bad or low score = 0, 1, 2, 3

FINE SINTER Co has an F-score of 6 indicating the company's financial situation is typical for a stable company.

Frequently Asked Questions Learn more about Piotroski F-Score →
What does a Piotroski F-Score of 6 mean?
FINE SINTER Co (NGO:5994) has a Piotroski F-Score of 6 as of Jun. 28, 2026. The Piotroski F-score grades a company's business operating strength from 0-9. View historical data on FINE SINTER Co and its competitors. This is near median its historical median of 6.00. Over the past decade, FINE SINTER Co's Piotroski F-Score has ranged from 4.00 to 9.00. According to the industry distribution chart, FINE SINTER Co ranks #731 out of 2972 companies in the Industrial Products industry, placing it in the top 24.6%.
Is FINE SINTER Co's Piotroski F-Score too high?
FINE SINTER Co's current Piotroski F-Score of 6 is near median its 10-year median of 6.00. Over the past 10 years, this metric has ranged from a low of 4.00 to a high of 9.00. The Industrial Products industry median Piotroski F-Score is 5.00. FINE SINTER Co's value of 6 is 20% above this industry median. Based on the distribution chart, FINE SINTER Co ranks #731 out of 2972 companies in the Industrial Products industry, which is in the top quartile — a strong position relative to peers. Overall, FINE SINTER Co has a GF Score™ of 51/100, reflecting its overall financial health beyond just this single metric.
How does FINE SINTER Co's Piotroski F-Score compare to ATI and CRS?
According to the Industrial Products industry distribution chart, FINE SINTER Co ranks #731 out of 2972 companies for Piotroski F-Score. This places FINE SINTER Co in the top 25% of its industry — outperforming the majority of peers. The industry median Piotroski F-Score is 5.00. FINE SINTER Co's value of 6 is 20% above this benchmark. Historically, FINE SINTER Co's own Piotroski F-Score has ranged from 4.00 to 9.00 over the past decade. While the company's 10-year median is 6.00 vs. the industry median of 5.00, FINE SINTER Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Piotroski F-Score for an Industrial Products company?
The median Piotroski F-Score among Industrial Products companies is 5.00, based on 2,972 companies in the industry. Companies in the top quartile (top 25%) have a Piotroski F-Score significantly above this median, while those in the bottom quartile fall well below. However, Piotroski F-Score should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. FINE SINTER Co's current Piotroski F-Score of 6 is 20% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Piotroski F-Score mean?
A high Piotroski F-Score can signal that a stock is expensive relative to its fundamentals. The Piotroski F-score grades a company's business operating strength from 0-9. View historical data on FINE SINTER Co and its competitors. For the Industrial Products industry, the median Piotroski F-Score is 5.00 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. FINE SINTER Co's current Piotroski F-Score is 6, which is near median its own 10-year median of 6.00. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is FINE SINTER Co stock overvalued right now?
FINE SINTER Co (NGO:5994) has a current Piotroski F-Score of 6. The stock's GF Value™ is 円1,776.13, compared to a current price of 円1,300.00 — trading 26.8% below its estimated fair value. The current Piotroski F-Score is 6, which is near median its 10-year median of 6.00 and 20% above the Industrial Products industry median of 5.00. FINE SINTER Co's overall GF Score™ is 51/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Piotroski F-Score calculated?
Piotroski F-Score is calculated from a company's financial statements. For FINE SINTER Co (NGO:5994), the current Piotroski F-Score is 6 as of Jun. 28, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.

Is FINE SINTER Co (NGO:5994) Overvalued in 2026?

Based on GuruFocus' analysis, FINE SINTER Co stock appears to be undervalued. The current stock price of 円1,300.00 is trading 26.8% below its estimated GF Value™ of 円1,776.13.

Key valuation signals for NGO:5994:

  • Piotroski F-Score: 6 (near median its 10-year median of 6.00)
  • GF Value™: 円1,776.13 vs. price of 円1,300.00 (26.8% below fair value)
  • GF Score™: 51/100 with 5 warning signs
  • Industry Position: 20% above the Industrial Products median (#731 of 2972)

No single metric tells the full story. See the NGO:5994 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.


FINE SINTER Co Business Description

Other Exchanges 5994:Japan
Address 1189-11,Nishinohora, Akechi-cho, Kasugai, Aichi, JPN, 480-0303
FINE SINTER Co Ltd is specialized in designing, manufacturing, and marketing products based on powder metallurgy technology. The company serves approximately 80% of its entire products in the automotive industry. Its products are used in many units of automotive; engine, transmission, steering, and sensors. In addition, the company also produces composite materials such as brake linings for trains, contact strips for current collectors and sealing materials.
51GF Score

Get the complete analysis for NGO:5994

Piotroski F-Score is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.

円1,300.00
Price
円1,776.13
GF Value