Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Aida EngineeringADERY -13.93%82 Debt-to-Equity is 0.05 as of Mar. 2026, which is 25% above its 10-year median of 0.04. GuruFocus rates ADERY with a GF Score™ of 82/100 and a GF Value™ of $73.97 (Modestly Undervalued). The stock has 1 warning sign investors should review. Among 2,679 Industrial Products companies, Aida Engineering ranks better than 83.73% on this metric.
A high debt to equity ratio generally means that a company has been aggressive in financing its growth with debt. This can result in volatile earnings as a result of the additional interest expense.
The historical rank and industry rank for Aida Engineering's Debt-to-Equity or its related term are showing as below:
ADERY'
s Debt-to-Equity Range Over the Past 10 Years
Min: 0.03 Med: 0.04 Max: 0.06
Current: 0.05
During the past 13 years, the highest Debt-to-Equity Ratio of Aida Engineering was 0.06. The lowest was 0.03. And the median was 0.04.
ADERY's Debt-to-Equity is ranked better than 83.73% of 2679
companies
in the Industrial Products industry
Industry Median: 0.28
vs ADERY: 0.05
Because a company can increase its ROE % by having more financial leverage, it is important to watch the leverage ratio when investing in high ROE % companies.
Aida Engineering Debt-to-Equity Related Terms
Aida Engineering Debt-to-Equity Historical Data
* Premium members only.
The historical data trend for Aida Engineering's Debt-to-Equity can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Specialty Industrial Machinery subindustry, Aida Engineering's Debt-to-Equity, along with its competitors' market caps and Debt-to-Equity data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Aida Engineering Debt-to-Equity vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Aida Engineering's Debt-to-Equity distribution charts can be found below:
* The bar in red indicates where Aida Engineering's Debt-to-Equity falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Aida Engineering (ADERY) has a Debt-to-Equity of 0.05 as of Mar. 2026. Debt-to-Equity ratio represents the ratio of total debt to total company equity. View historical data on Aida Engineering and its competitors. This is 25% above median its historical median of 0.04. Over the past decade, Aida Engineering's Debt-to-Equity has ranged from 0.03 to 0.06. According to the industry distribution chart, Aida Engineering ranks #436 out of 2679 companies in the Industrial Products industry, placing it in the top 16.3%.
Is Aida Engineering's Debt-to-Equity too high?
Aida Engineering's current Debt-to-Equity of 0.05 is 25% above median its 10-year median of 0.04. Over the past 10 years, this metric has ranged from a low of 0.03 to a high of 0.06. The Industrial Products industry median Debt-to-Equity is 0.28. Aida Engineering's value of 0.05 is 82.1% below this industry median. Based on the distribution chart, Aida Engineering ranks #436 out of 2679 companies in the Industrial Products industry, which is in the top quartile — a strong position relative to peers. Overall, Aida Engineering has a GF Score™ of 82/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Aida Engineering's Debt-to-Equity compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Aida Engineering ranks #436 out of 2679 companies for Debt-to-Equity. This places Aida Engineering in the top 16% of its industry — outperforming the majority of peers. The industry median Debt-to-Equity is 0.28. Aida Engineering's value of 0.05 is 82.1% below this benchmark. Historically, Aida Engineering's own Debt-to-Equity has ranged from 0.03 to 0.06 over the past decade. While the company's 10-year median is 0.04 vs. the industry median of 0.28, Aida Engineering has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-Equity for an Industrial Products company?
The median Debt-to-Equity among Industrial Products companies is 0.28, based on 2,679 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-Equity significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-Equity should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Aida Engineering's current Debt-to-Equity of 0.05 is 82.1% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-Equity mean?
A high Debt-to-Equity can signal that a stock is expensive relative to its fundamentals. Debt-to-Equity ratio represents the ratio of total debt to total company equity. View historical data on Aida Engineering and its competitors. For the Industrial Products industry, the median Debt-to-Equity is 0.28 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Aida Engineering's current Debt-to-Equity is 0.05, which is 25% above median its own 10-year median of 0.04. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Aida Engineering stock overvalued right now?
Based on GuruFocus' analysis, Aida Engineering (ADERY) is currently considered Modestly Undervalued. The stock's GF Value™ is $73.97, compared to a current price of $66.75 — trading 9.8% below its estimated fair value. The current Debt-to-Equity is 0.05, which is 25% above median its 10-year median of 0.04 and 82.1% below the Industrial Products industry median of 0.28. Aida Engineering's overall GF Score™ is 82/100 with 1 warning sign to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-Equity calculated?
Debt-to-Equity is calculated from a company's financial statements. For Aida Engineering (ADERY), the current Debt-to-Equity is 0.05 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Aida Engineering (ADERY) Overvalued in 2026?
Based on GuruFocus' analysis, Aida Engineering stock appears to be undervalued.
The current stock price of $66.75 is trading 9.8% below its estimated GF Value™ of $73.97.
GuruFocus considers Aida Engineering to be Modestly Undervalued.
Key valuation signals for ADERY:
Debt-to-Equity: 0.05 (25% above median its 10-year median of 0.04)
GF Value™: $73.97 vs. price of $66.75 (9.8% below fair value)
Industry Position: 82.1% below the Industrial Products median (#436 of 2679)
No single metric tells the full story. See the ADERY stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Aida Engineering Ltd is a Japan-based company that manufactures, sells, and services press machines and their ancillary facilities. The company's principal products comprise general-purpose servo presses, midsize and large servo presses, precision forming presses, general-purpose presses, midsize and large presses, high-speed automatic presses, cold forging presses, transfer feeders, coil feeders, and tooling dies. The company's services include overhaul, preventative maintenance, press inspections, machine relocation, and others. The company generates sales in Japan, Asia, the Americas, and Europe.
82GF Score
Get the complete analysis for ADERY
Debt-to-Equity is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ADERY has been successfully added to your 
