Aida EngineeringADERY -13.93%67 Return-on-Tangible-Asset is 3.10% as of Mar. 2026, which is 15% below its 10-year median of 3.63. GuruFocus rates ADERY with a GF Score™ of 67/100 and a GF Value™ of $74.77 (Modestly Undervalued). The stock has 1 warning sign investors should review. Among 3,070 Industrial Products companies, Aida Engineering ranks better than 52.21% on this metric.
Return-on-Tangible-Asset is calculated as Net Income divided by its average total tangible assets. Total tangible assets equals to Total Assets minus Intangible Assets. Aida Engineering's annualizedNet Income for the quarter that ended in Mar. 2026 was $24.1 Mil. Aida Engineering's average total tangible assets for the quarter that ended in Mar. 2026 was $776.1 Mil. Therefore, Aida Engineering's annualized Return-on-Tangible-Asset for the quarter that ended in Mar. 2026 was 3.10%.
The historical rank and industry rank for Aida Engineering's Return-on-Tangible-Asset or its related term are showing as below:
ADERY'
s Return-on-Tangible-Asset Range Over the Past 10 Years
Min: 0.82 Med: 3.63 Max: 4.97
Current: 3.55
During the past 13 years, Aida Engineering's highest Return-on-Tangible-Asset was 4.97%. The lowest was 0.82%. And the median was 3.63%.
ADERY's Return-on-Tangible-Asset is ranked better than 52.21% of 3070
companies
in the Industrial Products industry
Industry Median: 3.24
vs ADERY: 3.55
Return-on-Tangible-Asset measures the rate of return on the average total tangible assets (total assets minus intangible assets). Tangible means physical in nature. Intangible Assets are assets that are not physical in nature, and typically "derive their value from legal or intellectual rights." Return-on-Tangible-Asset measures a firm's efficiency at generating profits from its tangible assets. It shows how well a company uses what it has to generate earnings. Return-on-Tangible-Assets can vary drastically across industries. Therefore, Return-on-Tangible-Asset should not be used to compare companies in different industries.
Be Aware
Like ROE and ROA, Return-on-Tangible-Asset is calculated with only 12 months data. Fluctuations in the companys earnings or business cycles can affect the ratio drastically. It is important to look at the ratio from a long term perspective. Return-on-Tangible-Asset can be affected by events such as stock buyback or issuance, and by a companys tax rate and its interest payment. Return-on-Tangible-Asset may not reflect the true earning power of the assets. A more accurate measurement is ROC % (ROC).
Many analysts argue the higher return the better. Buffett states that really high Return-on-Tangible-Asset may indicate vulnerability in the durability of the competitive advantage.
Aida Engineering Return-on-Tangible-Asset Related Terms
Aida Engineering Return-on-Tangible-Asset Historical Data
* Premium members only.
The historical data trend for Aida Engineering's Return-on-Tangible-Asset can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
ADERY vs GEV, ETN, PH: Return-on-Tangible-Asset Comparison
For the Specialty Industrial Machinery subindustry, Aida Engineering's Return-on-Tangible-Asset, along with its competitors' market caps and Return-on-Tangible-Asset data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Aida Engineering Return-on-Tangible-Asset vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Aida Engineering's Return-on-Tangible-Asset distribution charts can be found below:
* The bar in red indicates where Aida Engineering's Return-on-Tangible-Asset falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual Return-on-Tangible-Asset, the net income of the last fiscal year and the average total tangible assets over the fiscal year are used. In calculating the quarterly data,
the Net Income data used here is four times the quarterly (Mar. 2026) net income data.
What does a Return-on-Tangible-Asset of 3.10% mean?
Aida Engineering (ADERY) has a Return-on-Tangible-Asset of 3.10% as of Mar. 2026. Return on tangible assets is the ratio of current-period net income to average two-period tangible assets. View historical data on Aida Engineering and its competitors. This is 15% below median its historical median of 3.63. Over the past decade, Aida Engineering's Return-on-Tangible-Asset has ranged from 0.82 to 4.97. According to the industry distribution chart, Aida Engineering ranks #1467 out of 3070 companies in the Industrial Products industry, placing it in the top 47.8%.
Is Aida Engineering's Return-on-Tangible-Asset too high?
Aida Engineering's current Return-on-Tangible-Asset of 3.10% is 15% below median its 10-year median of 3.63. Over the past 10 years, this metric has ranged from a low of 0.82 to a high of 4.97. The Industrial Products industry median Return-on-Tangible-Asset is 3.24. Aida Engineering's value of 3.10% is 4.3% below this industry median. Based on the distribution chart, Aida Engineering ranks #1467 out of 3070 companies in the Industrial Products industry, which is above the industry midpoint. Overall, Aida Engineering has a GF Score™ of 67/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Aida Engineering's Return-on-Tangible-Asset compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Aida Engineering ranks #1467 out of 3070 companies for Return-on-Tangible-Asset. This puts Aida Engineering in the upper half of its industry. The industry median Return-on-Tangible-Asset is 3.24. Aida Engineering's value of 3.10% is 4.3% below this benchmark. Historically, Aida Engineering's own Return-on-Tangible-Asset has ranged from 0.82 to 4.97 over the past decade. While the company's 10-year median is 3.63 vs. the industry median of 3.24, Aida Engineering has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Return-on-Tangible-Asset for an Industrial Products company?
The median Return-on-Tangible-Asset among Industrial Products companies is 3.24, based on 3,070 companies in the industry. Companies in the top quartile (top 25%) have a Return-on-Tangible-Asset significantly above this median, while those in the bottom quartile fall well below. However, Return-on-Tangible-Asset should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Aida Engineering's current Return-on-Tangible-Asset of 3.10% is 4.3% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Return-on-Tangible-Asset mean?
A high Return-on-Tangible-Asset can signal that a stock is expensive relative to its fundamentals. Return on tangible assets is the ratio of current-period net income to average two-period tangible assets. View historical data on Aida Engineering and its competitors. For the Industrial Products industry, the median Return-on-Tangible-Asset is 3.24 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Aida Engineering's current Return-on-Tangible-Asset is 3.10%, which is 15% below median its own 10-year median of 3.63. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Aida Engineering stock overvalued right now?
Based on GuruFocus' analysis, Aida Engineering (ADERY) is currently considered Modestly Undervalued. The stock's GF Value™ is $74.77, compared to a current price of $66.75 — trading 10.7% below its estimated fair value. The current Return-on-Tangible-Asset is 3.10%, which is 15% below median its 10-year median of 3.63 and 4.3% below the Industrial Products industry median of 3.24. Aida Engineering's overall GF Score™ is 67/100 with 1 warning sign to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Return-on-Tangible-Asset calculated?
Return-on-Tangible-Asset is calculated from a company's financial statements. For Aida Engineering (ADERY), the current Return-on-Tangible-Asset is 3.10% as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Aida Engineering (ADERY) Overvalued in 2026?
Based on GuruFocus' analysis, Aida Engineering stock appears to be undervalued.
The current stock price of $66.75 is trading 10.7% below its estimated GF Value™ of $74.77.
GuruFocus considers Aida Engineering to be Modestly Undervalued.
Key valuation signals for ADERY:
Return-on-Tangible-Asset: 3.10% (15% below median its 10-year median of 3.63)
GF Value™: $74.77 vs. price of $66.75 (10.7% below fair value)
Industry Position: 4.3% below the Industrial Products median (#1467 of 3070)
No single metric tells the full story. See the ADERY stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Aida Engineering Ltd is a Japan-based company that manufactures, sells, and services press machines and their ancillary facilities. The company's principal products comprise general-purpose servo presses, midsize and large servo presses, precision forming presses, general-purpose presses, midsize and large presses, high-speed automatic presses, cold forging presses, transfer feeders, coil feeders, and tooling dies. The company's services include overhaul, preventative maintenance, press inspections, machine relocation, and others. The company generates sales in Japan, Asia, the Americas, and Europe.
67GF Score
Get the complete analysis for ADERY
Return-on-Tangible-Asset is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ADERY has been successfully added to your 
