Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Aida EngineeringADERY -13.93%80 Debt-to-EBITDA is 0.30 as of Mar. 2026, which is 41% below its 10-year median of 0.51. GuruFocus rates ADERY with a GF Score™ of 80/100 and a GF Value™ of $54.75 (Modestly Overvalued). The stock has 4 warning signs investors should review. Among 2,332 Industrial Products companies, Aida Engineering ranks better than 75.64% on this metric.
Debt-to-EBITDA measures a company's ability to pay off its debt.
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt. According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
The historical rank and industry rank for Aida Engineering's Debt-to-EBITDA or its related term are showing as below:
ADERY'
s Debt-to-EBITDA Range Over the Past 10 Years
Min: 0.37 Med: 0.51 Max: 0.72
Current: 0.5
During the past 13 years, the highest Debt-to-EBITDA Ratio of Aida Engineering was 0.72. The lowest was 0.37. And the median was 0.51.
ADERY's Debt-to-EBITDA is ranked better than 75.64% of 2332
companies
in the Industrial Products industry
Industry Median: 1.7
vs ADERY: 0.50
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt.
According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
Aida Engineering Debt-to-EBITDA Related Terms
Aida Engineering Debt-to-EBITDA Historical Data
* Premium members only.
The historical data trend for Aida Engineering's Debt-to-EBITDA can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Specialty Industrial Machinery subindustry, Aida Engineering's Debt-to-EBITDA, along with its competitors' market caps and Debt-to-EBITDA data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Aida Engineering Debt-to-EBITDA vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Aida Engineering's Debt-to-EBITDA distribution charts can be found below:
* The bar in red indicates where Aida Engineering's Debt-to-EBITDA falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual Debt-to-EBITDA, the EBITDA of the last fiscal year is used. In calculating the annualized quarterly data,
the EBITDA data used here is four times the quarterly (Mar. 2026) EBITDA data.
Aida Engineering (ADERY) has a Debt-to-EBITDA of 0.30 as of Mar. 2026. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Aida Engineering. This is 41% below median its historical median of 0.51. Over the past decade, Aida Engineering's Debt-to-EBITDA has ranged from 0.37 to 0.72. According to the industry distribution chart, Aida Engineering ranks #568 out of 2332 companies in the Industrial Products industry, placing it in the top 24.4%.
Is Aida Engineering's Debt-to-EBITDA too high?
Aida Engineering's current Debt-to-EBITDA of 0.30 is 41% below median its 10-year median of 0.51. Over the past 10 years, this metric has ranged from a low of 0.37 to a high of 0.72. The Industrial Products industry median Debt-to-EBITDA is 1.70. Aida Engineering's value of 0.30 is 82.4% below this industry median. Based on the distribution chart, Aida Engineering ranks #568 out of 2332 companies in the Industrial Products industry, which is in the top quartile — a strong position relative to peers. Overall, Aida Engineering has a GF Score™ of 80/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Aida Engineering's Debt-to-EBITDA compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Aida Engineering ranks #568 out of 2332 companies for Debt-to-EBITDA. This places Aida Engineering in the top 24% of its industry — outperforming the majority of peers. The industry median Debt-to-EBITDA is 1.70. Aida Engineering's value of 0.30 is 82.4% below this benchmark. Historically, Aida Engineering's own Debt-to-EBITDA has ranged from 0.37 to 0.72 over the past decade. While the company's 10-year median is 0.51 vs. the industry median of 1.70, Aida Engineering has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-EBITDA for an Industrial Products company?
The median Debt-to-EBITDA among Industrial Products companies is 1.70, based on 2,332 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-EBITDA significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-EBITDA should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Aida Engineering's current Debt-to-EBITDA of 0.30 is 82.4% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-EBITDA mean?
A high Debt-to-EBITDA can signal that a stock is expensive relative to its fundamentals. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Aida Engineering. For the Industrial Products industry, the median Debt-to-EBITDA is 1.70 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Aida Engineering's current Debt-to-EBITDA is 0.30, which is 41% below median its own 10-year median of 0.51. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Aida Engineering stock overvalued right now?
Based on GuruFocus' analysis, Aida Engineering (ADERY) is currently considered Modestly Overvalued. The stock's GF Value™ is $54.75, compared to a current price of $66.75 — trading 21.9% above its estimated fair value. The current Debt-to-EBITDA is 0.30, which is 41% below median its 10-year median of 0.51 and 82.4% below the Industrial Products industry median of 1.70. Aida Engineering's overall GF Score™ is 80/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-EBITDA calculated?
Debt-to-EBITDA is calculated from a company's financial statements. For Aida Engineering (ADERY), the current Debt-to-EBITDA is 0.30 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Aida Engineering (ADERY) Overvalued in 2026?
Based on GuruFocus' analysis, Aida Engineering stock appears to be overvalued.
The current stock price of $66.75 is trading 21.9% above its estimated GF Value™ of $54.75.
GuruFocus considers Aida Engineering to be Modestly Overvalued.
Key valuation signals for ADERY:
Debt-to-EBITDA: 0.30 (41% below median its 10-year median of 0.51)
GF Value™: $54.75 vs. price of $66.75 (21.9% above fair value)
Industry Position: 82.4% below the Industrial Products median (#568 of 2332)
No single metric tells the full story. See the ADERY stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Aida Engineering Ltd is a Japan-based company that manufactures, sells, and services press machines and their ancillary facilities. The company's principal products comprise general-purpose servo presses, midsize and large servo presses, precision forming presses, general-purpose presses, midsize and large presses, high-speed automatic presses, cold forging presses, transfer feeders, coil feeders, and tooling dies. The company's services include overhaul, preventative maintenance, press inspections, machine relocation, and others. The company generates sales in Japan, Asia, the Americas, and Europe.
80GF Score
Get the complete analysis for ADERY
Debt-to-EBITDA is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ADERY has been successfully added to your 
