Aida EngineeringADERY -13.93%65 ROA % is 3.02% as of Mar. 2026, which is 16% below its 10-year median of 3.58. GuruFocus rates ADERY with a GF Score™ of 65/100 and a GF Value™ of $58.61 (Modestly Overvalued). The stock has 1 warning sign investors should review. Among 3,081 Industrial Products companies, Aida Engineering ranks better than 53.03% on this metric.
ROA % is calculated as Net Income divided by its average Total Assets over a certain period of time. Aida Engineering's annualizedNet Income for the quarter that ended in Mar. 2026 was $24.1 Mil.
Aida Engineering's average Total Assets over the quarter that ended in Mar. 2026 was $795.9 Mil. Therefore, Aida Engineering's annualized ROA % for the quarter that ended in Mar. 2026 was 3.02%.
The historical rank and industry rank for Aida Engineering's ROA % or its related term are showing as below:
ADERY'
s ROA % Range Over the Past 10 Years
Min: 0.81 Med: 3.58 Max: 4.93
Current: 3.48
During the past 13 years, Aida Engineering's highest ROA % was 4.93%. The lowest was 0.81%. And the median was 3.58%.
ADERY's ROA % is ranked better than 53.03% of 3081
companies
in the Industrial Products industry
Industry Median: 3.06
vs ADERY: 3.48
Aida Engineering (OTCPK:ADERY) ROA % Explanation
ROA % measures the rate of return on the total assets (shareholder equity plus liabilities). It measures a firm's efficiency at generating profits from shareholders' equity plus its liabilities. ROA % shows how well a company uses what it has to generate earnings. ROA %s can vary drastically across industries. Therefore, ROA % should not be used to compare companies in different industries. For retailers, a ROA % of higher than 5% is expected. For example, Wal-Mart (WMT) has a ROA % of about 8% as of 2012. For banks, ROA % is close to their interest spread. A banks ROA % is typically well under 2%.
Similar to ROE, ROA % is affected by profit margins and asset turnover. This can be seen from the Du Pont Formula:
Note:
The Net Income data used here is four times the quarterly (Mar. 2026) net income data. The Revenue data used here is four times the quarterly (Mar. 2026) revenue data.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Be Aware
Like ROE, ROA % is calculated with only 12 months data. Fluctuations in the company's earnings or business cycles can affect the ratio drastically. It is important to look at the ratio from a long term perspective. ROA % can be affected by events such as stock buyback or issuance, and by goodwill, a company's tax rate and its interest payment. ROA % may not reflect the true earning power of the assets. A more accurate measurement is ROC % (ROC).
Many analysts argue the higher return the better. Buffett states that really high ROA % may indicate vulnerability in the durability of the competitive advantage.
E.g. Raising $43b to take on KO is impossible, but $1.7b to take on Moody's is. Although Moody's ROA % and underlying economics is far superior to Coca Cola, the durability is far weaker because of lower entry cost.
Aida Engineering ROA % Related Terms
Aida Engineering ROA % Historical Data
* Premium members only.
The historical data trend for Aida Engineering's ROA % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Specialty Industrial Machinery subindustry, Aida Engineering's ROA %, along with its competitors' market caps and ROA % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Aida Engineering ROA % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Aida Engineering's ROA % distribution charts can be found below:
* The bar in red indicates where Aida Engineering's ROA % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual ROA %, the net income of the last fiscal year and the average total assets over the fiscal year are used. In calculating the quarterly data,
the Net Income data used here is four times the quarterly (Mar. 2026) net income data.
ROA % is displayed in the 30-year financial page.
Aida Engineering (ADERY) has a ROA % of 3.02% as of Mar. 2026. Return on assets is the ratio of current-period net income to average two-period total assets. View historical data on Aida Engineering and its competitors. This is 16% below median its historical median of 3.58. Over the past decade, Aida Engineering's ROA % has ranged from 0.81 to 4.93. According to the industry distribution chart, Aida Engineering ranks #1447 out of 3081 companies in the Industrial Products industry, placing it in the top 47%.
Is Aida Engineering's ROA % too high?
Aida Engineering's current ROA % of 3.02% is 16% below median its 10-year median of 3.58. Over the past 10 years, this metric has ranged from a low of 0.81 to a high of 4.93. The Industrial Products industry median ROA % is 3.06. Aida Engineering's value of 3.02% is 1.3% below this industry median. Based on the distribution chart, Aida Engineering ranks #1447 out of 3081 companies in the Industrial Products industry, which is above the industry midpoint. Overall, Aida Engineering has a GF Score™ of 65/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Aida Engineering's ROA % compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Aida Engineering ranks #1447 out of 3081 companies for ROA %. This puts Aida Engineering in the upper half of its industry. The industry median ROA % is 3.06. Aida Engineering's value of 3.02% is 1.3% below this benchmark. Historically, Aida Engineering's own ROA % has ranged from 0.81 to 4.93 over the past decade. While the company's 10-year median is 3.58 vs. the industry median of 3.06, Aida Engineering has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good ROA % for an Industrial Products company?
The median ROA % among Industrial Products companies is 3.06, based on 3,081 companies in the industry. Companies in the top quartile (top 25%) have a ROA % significantly above this median, while those in the bottom quartile fall well below. However, ROA % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Aida Engineering's current ROA % of 3.02% is 1.3% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high ROA % mean?
A high ROA % can signal that a stock is expensive relative to its fundamentals. Return on assets is the ratio of current-period net income to average two-period total assets. View historical data on Aida Engineering and its competitors. For the Industrial Products industry, the median ROA % is 3.06 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Aida Engineering's current ROA % is 3.02%, which is 16% below median its own 10-year median of 3.58. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Aida Engineering stock overvalued right now?
Based on GuruFocus' analysis, Aida Engineering (ADERY) is currently considered Modestly Overvalued. The stock's GF Value™ is $58.61, compared to a current price of $66.75 — trading 13.9% above its estimated fair value. The current ROA % is 3.02%, which is 16% below median its 10-year median of 3.58 and 1.3% below the Industrial Products industry median of 3.06. Aida Engineering's overall GF Score™ is 65/100 with 1 warning sign to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is ROA % calculated?
ROA % is calculated from a company's financial statements. For Aida Engineering (ADERY), the current ROA % is 3.02% as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Aida Engineering (ADERY) Overvalued in 2026?
Based on GuruFocus' analysis, Aida Engineering stock appears to be overvalued.
The current stock price of $66.75 is trading 13.9% above its estimated GF Value™ of $58.61.
GuruFocus considers Aida Engineering to be Modestly Overvalued.
Key valuation signals for ADERY:
ROA %: 3.02% (16% below median its 10-year median of 3.58)
GF Value™: $58.61 vs. price of $66.75 (13.9% above fair value)
Industry Position: 1.3% below the Industrial Products median (#1447 of 3081)
No single metric tells the full story. See the ADERY stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Aida Engineering Ltd is a Japan-based company that manufactures, sells, and services press machines and their ancillary facilities. The company's principal products comprise general-purpose servo presses, midsize and large servo presses, precision forming presses, general-purpose presses, midsize and large presses, high-speed automatic presses, cold forging presses, transfer feeders, coil feeders, and tooling dies. The company's services include overhaul, preventative maintenance, press inspections, machine relocation, and others. The company generates sales in Japan, Asia, the Americas, and Europe.
65GF Score
Get the complete analysis for ADERY
ROA % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ADERY has been successfully added to your 
