Aida EngineeringADERY -13.93%65 PEG Ratio is 0.73 as of Jun. 27, 2026, which is 9% above its 10-year median of 0.67. GuruFocus rates ADERY with a GF Score™ of 65/100 and a GF Value™ of $58.07 (Modestly Overvalued). The stock has 1 warning sign investors should review. Among 1,286 Industrial Products companies, Aida Engineering ranks better than 75.58% on this metric.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Aida Engineering's PEG Ratio or its related term are showing as below:
ADERY'
s PEG Ratio Range Over the Past 10 Years
Min: 0.25 Med: 0.67 Max: 12.9
Current: 0.85
During the past 13 years, Aida Engineering's highest PEG Ratio was 12.90. The lowest was 0.25. And the median was 0.67.
ADERY's PEG Ratio is ranked better than 75.58% of 1286
companies
in the Industrial Products industry
Industry Median: 1.87
vs ADERY: 0.85
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Aida Engineering (OTCPK:ADERY) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Aida Engineering PEG Ratio Related Terms
Aida Engineering PEG Ratio Historical Data
* Premium members only.
The historical data trend for Aida Engineering's PEG Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Specialty Industrial Machinery subindustry, Aida Engineering's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Aida Engineering PEG Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Aida Engineering's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Aida Engineering's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Aida Engineering (ADERY) has a PEG Ratio of 0.73 as of Jun. 27, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Aida Engineering and its competitors. This is near median its historical median of 0.67. Over the past decade, Aida Engineering's PEG Ratio has ranged from 0.25 to 12.90. According to the industry distribution chart, Aida Engineering ranks #314 out of 1286 companies in the Industrial Products industry, placing it in the top 24.4%.
Is Aida Engineering's PEG Ratio too high?
Aida Engineering's current PEG Ratio of 0.73 is near median its 10-year median of 0.67. Over the past 10 years, this metric has ranged from a low of 0.25 to a high of 12.90. The Industrial Products industry median PEG Ratio is 1.87. Aida Engineering's value of 0.73 is 61% below this industry median. Based on the distribution chart, Aida Engineering ranks #314 out of 1286 companies in the Industrial Products industry, which is in the top quartile — a strong position relative to peers. Overall, Aida Engineering has a GF Score™ of 65/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Aida Engineering's PEG Ratio compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Aida Engineering ranks #314 out of 1286 companies for PEG Ratio. This places Aida Engineering in the top 24% of its industry — outperforming the majority of peers. The industry median PEG Ratio is 1.87. Aida Engineering's value of 0.73 is 61% below this benchmark. Historically, Aida Engineering's own PEG Ratio has ranged from 0.25 to 12.90 over the past decade. While the company's 10-year median is 0.67 vs. the industry median of 1.87, Aida Engineering has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for an Industrial Products company?
The median PEG Ratio among Industrial Products companies is 1.87, based on 1,286 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Aida Engineering's current PEG Ratio of 0.73 is 61% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Aida Engineering and its competitors. For the Industrial Products industry, the median PEG Ratio is 1.87 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Aida Engineering's current PEG Ratio is 0.73, which is near median its own 10-year median of 0.67. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Aida Engineering stock overvalued right now?
Based on GuruFocus' analysis, Aida Engineering (ADERY) is currently considered Modestly Overvalued. The stock's GF Value™ is $58.07, compared to a current price of $66.75 — trading 14.9% above its estimated fair value. The current PEG Ratio is 0.73, which is near median its 10-year median of 0.67 and 61% below the Industrial Products industry median of 1.87. Aida Engineering's overall GF Score™ is 65/100 with 1 warning sign to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Aida Engineering (ADERY), the current PEG Ratio is 0.73 as of Jun. 27, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Aida Engineering (ADERY) Overvalued in 2026?
Based on GuruFocus' analysis, Aida Engineering stock appears to be overvalued.
The current stock price of $66.75 is trading 14.9% above its estimated GF Value™ of $58.07.
GuruFocus considers Aida Engineering to be Modestly Overvalued.
Key valuation signals for ADERY:
PEG Ratio: 0.73 (near median its 10-year median of 0.67)
GF Value™: $58.07 vs. price of $66.75 (14.9% above fair value)
Industry Position: 61% below the Industrial Products median (#314 of 1286)
No single metric tells the full story. See the ADERY stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Aida Engineering Ltd is a Japan-based company that manufactures, sells, and services press machines and their ancillary facilities. The company's principal products comprise general-purpose servo presses, midsize and large servo presses, precision forming presses, general-purpose presses, midsize and large presses, high-speed automatic presses, cold forging presses, transfer feeders, coil feeders, and tooling dies. The company's services include overhaul, preventative maintenance, press inspections, machine relocation, and others. The company generates sales in Japan, Asia, the Americas, and Europe.
65GF Score
Get the complete analysis for ADERY
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ADERY has been successfully added to your 
