Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Master ComponentsNSE:MASTER -2.22%69 Debt-to-Equity is 0.30 as of Mar. 2026, which is 76% above its 10-year median of 0.17. GuruFocus rates NSE:MASTER with a GF Score™ of 69/100 and a GF Value™ of ₹663.65 (Possible Value Trap). The stock has 5 warning signs investors should review. Among 362 Packaging & Containers companies, Master Components ranks better than 60.5% on this metric.
A high debt to equity ratio generally means that a company has been aggressive in financing its growth with debt. This can result in volatile earnings as a result of the additional interest expense.
The historical rank and industry rank for Master Components's Debt-to-Equity or its related term are showing as below:
NSE:MASTER'
s Debt-to-Equity Range Over the Past 10 Years
Min: -0.01 Med: 0.17 Max: 0.46
Current: 0.3
During the past 7 years, the highest Debt-to-Equity Ratio of Master Components was 0.46. The lowest was -0.01. And the median was 0.17.
NSE:MASTER's Debt-to-Equity is ranked better than 60.5% of 362
companies
in the Packaging & Containers industry
Industry Median: 0.43
vs NSE:MASTER: 0.30
Because a company can increase its ROE % by having more financial leverage, it is important to watch the leverage ratio when investing in high ROE % companies.
Master Components Debt-to-Equity Related Terms
Master Components Debt-to-Equity Historical Data
* Premium members only.
The historical data trend for Master Components's Debt-to-Equity can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
NSE:MASTER vs SW, PKG, IP: Debt-to-Equity Comparison
For the Packaging & Containers subindustry, Master Components's Debt-to-Equity, along with its competitors' market caps and Debt-to-Equity data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Master Components Debt-to-Equity vs Packaging & Containers Industry
For the Packaging & Containers industry and Consumer Cyclical sector, Master Components's Debt-to-Equity distribution charts can be found below:
* The bar in red indicates where Master Components's Debt-to-Equity falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Master Components (NSE:MASTER) has a Debt-to-Equity of 0.30 as of Mar. 2026. Debt-to-Equity ratio represents the ratio of total debt to total company equity. View historical data on Master Components and its competitors. This is 76% above median its historical median of 0.17. According to the industry distribution chart, Master Components ranks #143 out of 362 companies in the Packaging & Containers industry, placing it in the top 39.5%.
Is Master Components' Debt-to-Equity too high?
Master Components' current Debt-to-Equity of 0.30 is 76% above median its 10-year median of 0.17. The Packaging & Containers industry median Debt-to-Equity is 0.43. Master Components' value of 0.30 is 30.2% below this industry median. Based on the distribution chart, Master Components ranks #143 out of 362 companies in the Packaging & Containers industry, which is above the industry midpoint. Overall, Master Components has a GF Score™ of 69/100 and is considered Possible Value Trap, reflecting its overall financial health beyond just this single metric.
How does Master Components' Debt-to-Equity compare to SW and PKG?
According to the Packaging & Containers industry distribution chart, Master Components ranks #143 out of 362 companies for Debt-to-Equity. This puts Master Components in the upper half of its industry. The industry median Debt-to-Equity is 0.43. Master Components' value of 0.30 is 30.2% below this benchmark. While the company's 10-year median is 0.17 vs. the industry median of 0.43, Master Components has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-Equity for a Packaging & Containers company?
The median Debt-to-Equity among Packaging & Containers companies is 0.43, based on 362 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-Equity significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-Equity should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Master Components's current Debt-to-Equity of 0.30 is 30.2% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-Equity mean?
A high Debt-to-Equity can signal that a stock is expensive relative to its fundamentals. Debt-to-Equity ratio represents the ratio of total debt to total company equity. View historical data on Master Components and its competitors. For the Packaging & Containers industry, the median Debt-to-Equity is 0.43 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Master Components's current Debt-to-Equity is 0.30, which is 76% above median its own 10-year median of 0.17. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Master Components stock overvalued right now?
Based on GuruFocus' analysis, Master Components (NSE:MASTER) is currently considered Possible Value Trap. The stock's GF Value™ is ₹663.65, compared to a current price of ₹440.00 — trading 33.7% below its estimated fair value. The current Debt-to-Equity is 0.30, which is 76% above median its 10-year median of 0.17 and 30.2% below the Packaging & Containers industry median of 0.43. Master Components' overall GF Score™ is 69/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-Equity calculated?
Debt-to-Equity is calculated from a company's financial statements. For Master Components (NSE:MASTER), the current Debt-to-Equity is 0.30 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Master Components (NSE:MASTER) Overvalued in 2026?
Based on GuruFocus' analysis, Master Components stock appears to be undervalued.
The current stock price of ₹440.00 is trading 33.7% below its estimated GF Value™ of ₹663.65.
GuruFocus considers Master Components to be Possible Value Trap.
Key valuation signals for NSE:MASTER:
Debt-to-Equity: 0.30 (76% above median its 10-year median of 0.17)
GF Value™: ₹663.65 vs. price of ₹440.00 (33.7% below fair value)
Industry Position: 30.2% below the Packaging & Containers median (#143 of 362)
No single metric tells the full story. See the NSE:MASTER stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Master Components Ltd is a company engaged in manufacturing plastic engineering components and subassemblies. The company's product is an industrial capital goods and it undergoes stringent quality tests to meet industry standards before delivering it to its clients. The company provides a list of services such as Thermoplastic Injection Moulding, Thermoset Injection Moulding, Thermoset transfer moulding, and Compression Moulding. The company's product categories include Electrical Components, Automotive Components, Electrical Components, Medical Components, Industrial Components.
69GF Score
Get the complete analysis for NSE:MASTER
Debt-to-Equity is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NSE:MASTER has been successfully added to your 
