Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Master ComponentsNSE:MASTER +2.68%69 Debt-to-EBITDA is 0.76 as of Mar. 2026, which is 1% above its 10-year median of 0.75. GuruFocus rates NSE:MASTER with a GF Score™ of 69/100 and a GF Value™ of ₹661.93 (Modestly Undervalued). The stock has 4 warning signs investors should review. Among 332 Packaging & Containers companies, Master Components ranks better than 67.47% on this metric.
Debt-to-EBITDA measures a company's ability to pay off its debt.
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt. According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
The historical rank and industry rank for Master Components's Debt-to-EBITDA or its related term are showing as below:
NSE:MASTER'
s Debt-to-EBITDA Range Over the Past 10 Years
Min: -0.03 Med: 0.75 Max: 1.53
Current: 1.53
During the past 7 years, the highest Debt-to-EBITDA Ratio of Master Components was 1.53. The lowest was -0.03. And the median was 0.75.
NSE:MASTER's Debt-to-EBITDA is ranked better than 67.47% of 332
companies
in the Packaging & Containers industry
Industry Median: 2.58
vs NSE:MASTER: 1.53
A high Debt-to-EBITDA ratio generally means that a company may spend more time to paying off its debt.
According to Joel Tillinghast's BIG MONEY THINKS SMALL: Biases, Blind Spots, and Smarter Investing, a ratio of Debt-to-EBITDA exceeding four is usually considered scary unless tangible assets cover the debt.
Master Components Debt-to-EBITDA Related Terms
Master Components Debt-to-EBITDA Historical Data
* Premium members only.
The historical data trend for Master Components's Debt-to-EBITDA can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
NSE:MASTER vs SW, PKG, IP: Debt-to-EBITDA Comparison
For the Packaging & Containers subindustry, Master Components's Debt-to-EBITDA, along with its competitors' market caps and Debt-to-EBITDA data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Master Components Debt-to-EBITDA vs Packaging & Containers Industry
For the Packaging & Containers industry and Consumer Cyclical sector, Master Components's Debt-to-EBITDA distribution charts can be found below:
* The bar in red indicates where Master Components's Debt-to-EBITDA falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual Debt-to-EBITDA, the EBITDA of the last fiscal year is used. In calculating the annualized quarterly data,
the EBITDA data used here is two times the quarterly (Mar. 2026) EBITDA data.
Master Components (NSE:MASTER) has a Debt-to-EBITDA of 0.76 as of Mar. 2026. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Master Components. This is near median its historical median of 0.75. According to the industry distribution chart, Master Components ranks #108 out of 332 companies in the Packaging & Containers industry, placing it in the top 32.5%.
Is Master Components' Debt-to-EBITDA too high?
Master Components' current Debt-to-EBITDA of 0.76 is near median its 10-year median of 0.75. The Packaging & Containers industry median Debt-to-EBITDA is 2.58. Master Components' value of 0.76 is 70.5% below this industry median. Based on the distribution chart, Master Components ranks #108 out of 332 companies in the Packaging & Containers industry, which is above the industry midpoint. Overall, Master Components has a GF Score™ of 69/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Master Components' Debt-to-EBITDA compare to SW and PKG?
According to the Packaging & Containers industry distribution chart, Master Components ranks #108 out of 332 companies for Debt-to-EBITDA. This puts Master Components in the upper half of its industry. The industry median Debt-to-EBITDA is 2.58. Master Components' value of 0.76 is 70.5% below this benchmark. While the company's 10-year median is 0.75 vs. the industry median of 2.58, Master Components has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Debt-to-EBITDA for a Packaging & Containers company?
The median Debt-to-EBITDA among Packaging & Containers companies is 2.58, based on 332 companies in the industry. Companies in the top quartile (top 25%) have a Debt-to-EBITDA significantly above this median, while those in the bottom quartile fall well below. However, Debt-to-EBITDA should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Master Components's current Debt-to-EBITDA of 0.76 is 70.5% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Debt-to-EBITDA mean?
A high Debt-to-EBITDA can signal that a stock is expensive relative to its fundamentals. Debt-to-EBITDA ratio represents the ratio of total debt to total earnings before interest, taxes, depreciation and amortization. View historical data on Master Components. For the Packaging & Containers industry, the median Debt-to-EBITDA is 2.58 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Master Components's current Debt-to-EBITDA is 0.76, which is near median its own 10-year median of 0.75. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Master Components stock overvalued right now?
Based on GuruFocus' analysis, Master Components (NSE:MASTER) is currently considered Modestly Undervalued. The stock's GF Value™ is ₹661.93, compared to a current price of ₹466.95 — trading 29.5% below its estimated fair value. The current Debt-to-EBITDA is 0.76, which is near median its 10-year median of 0.75 and 70.5% below the Packaging & Containers industry median of 2.58. Master Components' overall GF Score™ is 69/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Debt-to-EBITDA calculated?
Debt-to-EBITDA is calculated from a company's financial statements. For Master Components (NSE:MASTER), the current Debt-to-EBITDA is 0.76 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Master Components (NSE:MASTER) Overvalued in 2026?
Based on GuruFocus' analysis, Master Components stock appears to be undervalued.
The current stock price of ₹466.95 is trading 29.5% below its estimated GF Value™ of ₹661.93.
GuruFocus considers Master Components to be Modestly Undervalued.
Key valuation signals for NSE:MASTER:
Debt-to-EBITDA: 0.76 (near median its 10-year median of 0.75)
GF Value™: ₹661.93 vs. price of ₹466.95 (29.5% below fair value)
Industry Position: 70.5% below the Packaging & Containers median (#108 of 332)
No single metric tells the full story. See the NSE:MASTER stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Master Components Ltd is a company engaged in manufacturing plastic engineering components and subassemblies. The company's product is an industrial capital goods and it undergoes stringent quality tests to meet industry standards before delivering it to its clients. The company provides a list of services such as Thermoplastic Injection Moulding, Thermoset Injection Moulding, Thermoset transfer moulding, and Compression Moulding. The company's product categories include Electrical Components, Automotive Components, Electrical Components, Medical Components, Industrial Components.
69GF Score
Get the complete analysis for NSE:MASTER
Debt-to-EBITDA is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NSE:MASTER has been successfully added to your 
