Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Master ComponentsNSE:MASTER -2.22%69 EV-to-EBITDA is 25.82 as of Jul. 23, 2026, which is 61% above its 10-year median of 16.00. GuruFocus rates NSE:MASTER with a GF Score™ of 69/100 and a GF Value™ of ₹663.65 (Possible Value Trap). The stock has 5 warning signs investors should review. Among 346 Packaging & Containers companies, Master Components ranks worse than 86.13% on this metric.
EV-to-EBITDA is calculated as enterprise value divided by its EBITDA. As of today, Master Components's enterprise value is ₹1,838.5 Mil.
Master Components's EBITDA for the trailing twelve months (TTM) ended in Mar. 2026 was ₹71.2 Mil. Therefore, Master Components's EV-to-EBITDA for today is 25.82.
The historical rank and industry rank for Master Components's EV-to-EBITDA or its related term are showing as below:
NSE:MASTER'
s EV-to-EBITDA Range Over the Past 10 Years
Min: 9.7 Med: 16 Max: 29.09
Current: 25.82
During the past 7 years, the highest EV-to-EBITDA of Master Components was 29.09. The lowest was 9.70. And the median was 16.00.
NSE:MASTER's EV-to-EBITDA is ranked worse than 86.13% of 346
companies
in the Packaging & Containers industry
Industry Median: 8.835
vs NSE:MASTER: 25.82
EV-to-EBITDA is a valuation multiple used in finance and investment to measure the value of a company. This important multiple is often used in conjunction with, or as an alternative to, the PE Ratio to determine the fair market value of a company.
EV-to-EBITDA is a valuation multiple used in finance and investment to measure the value of a company. This important multiple is often used in conjunction with, or as an alternative to, the PE Ratio (TTM) to determine the fair market value of a company.
Master Components's PE Ratio (TTM) for today is calculated as:
Master Components's share price for today is ₹440.00.
For company reported semi-annually, GuruFocus uses latest annual data as the TTM data. Master Components's Earnings per Share (Diluted) for the trailing twelve months (TTM) ended in Mar. 2026 was ₹10.500.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Study has found that the companies with the lowest EV-to-EBITDA outperforms companies measured as cheap by other ratios such as PE Ratio (TTM).
The historical data trend for Master Components's EV-to-EBITDA can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
NSE:MASTER vs SW, PKG, IP: EV-to-EBITDA Comparison
For the Packaging & Containers subindustry, Master Components's EV-to-EBITDA, along with its competitors' market caps and EV-to-EBITDA data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Master Components EV-to-EBITDA vs Packaging & Containers Industry
For the Packaging & Containers industry and Consumer Cyclical sector, Master Components's EV-to-EBITDA distribution charts can be found below:
* The bar in red indicates where Master Components's EV-to-EBITDA falls into.
Master Components's current Enterprise Value is ₹1,838.5 Mil.
For company reported semi-annually, GuruFocus uses latest annual data as the TTM data. Master Components's EBITDA for the trailing twelve months (TTM) ended in Mar. 2026 was ₹71.2 Mil.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Master Components (NSE:MASTER) has a EV-to-EBITDA of 25.82 as of Jul. 23, 2026. EV to EBITDA ratio is the company's enterprise value divided by earnings before interest, taxes, depreciation and amortization. View historical data on Master Components. This is 61% above median its historical median of 16.00. Over the past decade, Master Components' EV-to-EBITDA has ranged from 9.70 to 29.09. According to the industry distribution chart, Master Components ranks #298 out of 346 companies in the Packaging & Containers industry, placing it in the top 86.1%.
Is Master Components' EV-to-EBITDA too high?
Master Components' current EV-to-EBITDA of 25.82 is 61% above median its 10-year median of 16.00. Over the past 10 years, this metric has ranged from a low of 9.70 to a high of 29.09. The Packaging & Containers industry median EV-to-EBITDA is 8.84. Master Components' value of 25.82 is 192.2% above this industry median. Based on the distribution chart, Master Components ranks #298 out of 346 companies in the Packaging & Containers industry, which is in the bottom quartile relative to peers. Overall, Master Components has a GF Score™ of 69/100 and is considered Possible Value Trap, reflecting its overall financial health beyond just this single metric.
How does Master Components' EV-to-EBITDA compare to SW and PKG?
According to the Packaging & Containers industry distribution chart, Master Components ranks #298 out of 346 companies for EV-to-EBITDA. This places Master Components in the lower half of its industry. The industry median EV-to-EBITDA is 8.84. Master Components' value of 25.82 is 192.2% above this benchmark. Historically, Master Components' own EV-to-EBITDA has ranged from 9.70 to 29.09 over the past decade. While the company's 10-year median is 16.00 vs. the industry median of 8.84, Master Components has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EV-to-EBITDA for a Packaging & Containers company?
The median EV-to-EBITDA among Packaging & Containers companies is 8.84, based on 346 companies in the industry. Companies in the top quartile (top 25%) have a EV-to-EBITDA significantly above this median, while those in the bottom quartile fall well below. However, EV-to-EBITDA should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Master Components's current EV-to-EBITDA of 25.82 is 192.2% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EV-to-EBITDA mean?
A high EV-to-EBITDA can signal that a stock is expensive relative to its fundamentals. EV to EBITDA ratio is the company's enterprise value divided by earnings before interest, taxes, depreciation and amortization. View historical data on Master Components. For the Packaging & Containers industry, the median EV-to-EBITDA is 8.84 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Master Components's current EV-to-EBITDA is 25.82, which is 61% above median its own 10-year median of 16.00. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Master Components stock overvalued right now?
Based on GuruFocus' analysis, Master Components (NSE:MASTER) is currently considered Possible Value Trap. The stock's GF Value™ is ₹663.65, compared to a current price of ₹440.00 — trading 33.7% below its estimated fair value. The current EV-to-EBITDA is 25.82, which is 61% above median its 10-year median of 16.00 and 192.2% above the Packaging & Containers industry median of 8.84. Master Components' overall GF Score™ is 69/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EV-to-EBITDA calculated?
EV-to-EBITDA is calculated from a company's financial statements. For Master Components (NSE:MASTER), the current EV-to-EBITDA is 25.82 as of Jul. 23, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Master Components (NSE:MASTER) Overvalued in 2026?
Based on GuruFocus' analysis, Master Components stock appears to be undervalued.
The current stock price of ₹440.00 is trading 33.7% below its estimated GF Value™ of ₹663.65.
GuruFocus considers Master Components to be Possible Value Trap.
Key valuation signals for NSE:MASTER:
EV-to-EBITDA: 25.82 (61% above median its 10-year median of 16.00)
GF Value™: ₹663.65 vs. price of ₹440.00 (33.7% below fair value)
Industry Position: 192.2% above the Packaging & Containers median (#298 of 346)
No single metric tells the full story. See the NSE:MASTER stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Master Components Ltd is a company engaged in manufacturing plastic engineering components and subassemblies. The company's product is an industrial capital goods and it undergoes stringent quality tests to meet industry standards before delivering it to its clients. The company provides a list of services such as Thermoplastic Injection Moulding, Thermoset Injection Moulding, Thermoset transfer moulding, and Compression Moulding. The company's product categories include Electrical Components, Automotive Components, Electrical Components, Medical Components, Industrial Components.
69GF Score
Get the complete analysis for NSE:MASTER
EV-to-EBITDA is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NSE:MASTER has been successfully added to your 
