Master ComponentsNSE:MASTER 62 Dividend Yield % is 0.22% as of Jun. 26, 2026, which is 47% above its 10-year median of 0.15. GuruFocus rates NSE:MASTER with a GF Score™ of 62/100 and a GF Value™ of ₹65,440.57 (Possible Value Trap). The stock has 2 warning signs investors should review. Among 249 Packaging & Containers companies, Master Components ranks worse than 97.19% on this metric.
As of today (2026-06-26), the Trailing Annual Dividend Yield of Master Components is 0.22%.
Good Sign:
Master Components Ltd stock Dividend Yield % is close to 1-year high.
The historical rank and industry rank for Master Components's Dividend Yield % or its related term are showing as below:
NSE:MASTER'
s Dividend Yield % Range Over the Past 10 Years
Min: 0.14 Med: 0.15 Max: 0.22
Current: 0.22
During the past 7 years, the highest Dividend Yield of Master Components was 0.22%. The lowest was 0.14%. And the median was 0.15%.
NSE:MASTER's Dividend Yield % is ranked worse than 97.19% of 249
companies
in the Packaging & Containers industry
Industry Median: 2.49
vs NSE:MASTER: 0.22
Over the long term, the return from dividends has been a significant contributor to the total returns produced by equity securities. Studies by Elroy Dimson, Paul Marsh, and Mike Staunton of Princeton University (2002) found that a market-oriented portfolio, which included reinvested dividends, would have generated nearly 85 times the wealth generated by the same portfolio relying solely on capital gains.
Dividends may also qualify a lower tax rate for investors.
In dividends investing, Payout Ratio and Dividend Growth Rate are the two most important variables for consideration. A lower payout ratio may indicate that the company has more room to increase its dividends.
Master Components Dividend Yield % Historical Data
* Premium members only.
The historical data trend for Master Components's Dividend Yield % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
NSE:MASTER vs SW, PKG, AMCR: Dividend Yield % Comparison
For the Packaging & Containers subindustry, Master Components's Dividend Yield %, along with its competitors' market caps and Dividend Yield % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Master Components Dividend Yield % vs Packaging & Containers Industry
For the Packaging & Containers industry and Consumer Cyclical sector, Master Components's Dividend Yield % distribution charts can be found below:
* The bar in red indicates where Master Components's Dividend Yield % falls into.
Dividend Yield measures how much a company pays out in dividends each year relative to its share price.
Master Components Recent Full-Year* Dividend History
Amount
Ex-date
Record Date
Pay Date
Type
Frequency
Forex Rate
INR 0.750000
2026-06-23
2026-06-23
0000-00-00
Cash Dividend
annually
INR:INR 1.000000
INR 0.500000
2025-07-28
2025-07-28
0000-00-00
Cash Dividend
annually
INR:INR 1.000000
* GuruFocus has an internal rule that if the most recent dividend payment frequency is at least 4 times a year, then the full year will be calculated according to the frequency of payment or the one-year time frame, whichever is stricter.
* GuruFocus converts dividend currency to local traded share price currency in order to calculate dividend yield. Please refer to the last column "Forex Rate" in the above table.
Master Components's Trailing Annual Dividend Yield (%) for Today is calculated as
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Master Components (NSE:MASTER) has a Dividend Yield % of 0.22% as of Jun. 26, 2026. Dividend yield is the ratio of company dividends to the share price. View historical data on Master Components and its competitors. This is 47% above median its historical median of 0.15. Over the past decade, Master Components' Dividend Yield % has ranged from 0.14 to 0.22. According to the industry distribution chart, Master Components ranks #242 out of 249 companies in the Packaging & Containers industry, placing it in the top 97.2%.
Is Master Components' Dividend Yield % too high?
Master Components' current Dividend Yield % of 0.22% is 47% above median its 10-year median of 0.15. Over the past 10 years, this metric has ranged from a low of 0.14 to a high of 0.22. The Packaging & Containers industry median Dividend Yield % is 2.49. Master Components' value of 0.22% is 91.2% below this industry median. Based on the distribution chart, Master Components ranks #242 out of 249 companies in the Packaging & Containers industry, which is in the bottom quartile relative to peers. Overall, Master Components has a GF Score™ of 62/100 and is considered Possible Value Trap, reflecting its overall financial health beyond just this single metric.
How does Master Components' Dividend Yield % compare to SW and PKG?
According to the Packaging & Containers industry distribution chart, Master Components ranks #242 out of 249 companies for Dividend Yield %. This places Master Components in the lower half of its industry. The industry median Dividend Yield % is 2.49. Master Components' value of 0.22% is 91.2% below this benchmark. Historically, Master Components' own Dividend Yield % has ranged from 0.14 to 0.22 over the past decade. While the company's 10-year median is 0.15 vs. the industry median of 2.49, Master Components has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Dividend Yield % for a Packaging & Containers company?
The median Dividend Yield % among Packaging & Containers companies is 2.49, based on 249 companies in the industry. Companies in the top quartile (top 25%) have a Dividend Yield % significantly above this median, while those in the bottom quartile fall well below. However, Dividend Yield % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Master Components's current Dividend Yield % of 0.22% is 91.2% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Dividend Yield % mean?
A high Dividend Yield % can signal that a stock is expensive relative to its fundamentals. Dividend yield is the ratio of company dividends to the share price. View historical data on Master Components and its competitors. For the Packaging & Containers industry, the median Dividend Yield % is 2.49 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Master Components's current Dividend Yield % is 0.22%, which is 47% above median its own 10-year median of 0.15. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Master Components stock overvalued right now?
Based on GuruFocus' analysis, Master Components (NSE:MASTER) is currently considered Possible Value Trap. The stock's GF Value™ is ₹65,440.57, compared to a current price of ₹346.05 — trading 99.5% below its estimated fair value. The current Dividend Yield % is 0.22%, which is 47% above median its 10-year median of 0.15 and 91.2% below the Packaging & Containers industry median of 2.49. Master Components' overall GF Score™ is 62/100 with 2 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Dividend Yield % calculated?
Dividend Yield % is calculated from a company's financial statements. For Master Components (NSE:MASTER), the current Dividend Yield % is 0.22% as of Jun. 26, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Master Components (NSE:MASTER) Overvalued in 2026?
Based on GuruFocus' analysis, Master Components stock appears to be undervalued.
The current stock price of ₹346.05 is trading 99.5% below its estimated GF Value™ of ₹65,440.57.
GuruFocus considers Master Components to be Possible Value Trap.
Key valuation signals for NSE:MASTER:
Dividend Yield %: 0.22% (47% above median its 10-year median of 0.15)
GF Value™: ₹65,440.57 vs. price of ₹346.05 (99.5% below fair value)
Industry Position: 91.2% below the Packaging & Containers median (#242 of 249)
No single metric tells the full story. See the NSE:MASTER stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Master Components Ltd is a company engaged in manufacturing plastic engineering components and subassemblies. The company's product is an industrial capital goods and it undergoes stringent quality tests to meet industry standards before delivering it to its clients. The company provides a list of services such as Thermoplastic Injection Moulding, Thermoset Injection Moulding, Thermoset transfer moulding, and Compression Moulding. The company's product categories include Electrical Components, Automotive Components, Electrical Components, Medical Components, Industrial Components.
62GF Score
Get the complete analysis for NSE:MASTER
Dividend Yield % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NSE:MASTER has been successfully added to your 