Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
During the past 12 months, Danieli & C. Officine Meccaniche SpA's average EPS without NRI Growth Rate was -10.40% per year.
During the past 3 years, the average EPS without NRI Growth Rate was -2.50% per year.
During the past 5 years, the average EPS without NRI Growth Rate was 23.10% per year.
During the past 10 years, the average EPS without NRI Growth Rate was 10.80% per year.
Please click Growth Rate Calculation Example (GuruFocus) to see how GuruFocus calculates Wal-Mart Stores Inc (WMT)'s revenue growth rate. You can apply the same method to get the average EPS without NRI growth rate.
During the past 13 years, the highest 3-Year average EPS without NRI Growth Rate of Danieli & C. Officine Meccaniche SpA was 63.10% per year. The lowest was -24.50% per year. And the median was 10.75% per year.
Danieli & C. Officine Meccaniche SpA (FRA:DAS) 3-Year EPS without NRI Growth Rate Explanation
EPS without NRI is the amount of earnings without non-recurring items per outstanding share of the company's stock.
Earnings Per Share (EPS) is the single most important variable used by Wall Street in determining the earnings power of a company. But investors need to be aware that Earnings per Share can be easily manipulated by adjusting depreciation and amortization rate or non-recurring items. That's why GuruFocus lists Earnings per share without Non-Recurring Items, which better reflects the company's underlying performance.
Danieli & C. Officine Meccaniche SpA 3-Year EPS without NRI Growth Rate Related Terms
FRA:DAS vs GEV, ETN, PH: 3-Year EPS without NRI Growth Rate Comparison
For the Specialty Industrial Machinery subindustry, Danieli & C. Officine Meccaniche SpA's 3-Year EPS without NRI Growth Rate, along with its competitors' market caps and 3-Year EPS without NRI Growth Rate data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Danieli & C. Officine Meccaniche SpA 3-Year EPS without NRI Growth Rate vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Danieli & C. Officine Meccaniche SpA's 3-Year EPS without NRI Growth Rate distribution charts can be found below:
* The bar in red indicates where Danieli & C. Officine Meccaniche SpA's 3-Year EPS without NRI Growth Rate falls into.
Danieli & C. Officine Meccaniche SpA 3-Year EPS without NRI Growth Rate Calculation
This is the 3-year average growth rate of EPS without NRI. The growth rate is calculated using exponential compounding based on the latest four year annual data.
Please click Growth Rate Calculation Example (GuruFocus) to see how GuruFocus calculates Wal-Mart Stores Inc (WMT)'s revenue growth rate. You can apply the same method to get the average EPS without NRI growth rate.
What does a 3-Year EPS without NRI Growth Rate of -2.50% mean?
Danieli & C. Officine Meccaniche SpA (FRA:DAS) has a 3-Year EPS without NRI Growth Rate of -2.50% as of Dec. 2025. 3-Year EPS without NRI Growth Rate is the 3-year average growth rate of EPS without NRI. View historical data for Danieli & C. Officine Meccaniche SpA and its competitors. According to the industry distribution chart, Danieli & C. Officine Meccaniche SpA ranks #1408 out of 2426 companies in the Industrial Products industry, placing it in the top 58%.
Is Danieli & C. Officine Meccaniche SpA's 3-Year EPS without NRI Growth Rate too high?
Danieli & C. Officine Meccaniche SpA's current 3-Year EPS without NRI Growth Rate is -2.50%. Based on the distribution chart, Danieli & C. Officine Meccaniche SpA ranks #1408 out of 2426 companies in the Industrial Products industry, which is below the industry midpoint. Overall, Danieli & C. Officine Meccaniche SpA has a GF Score™ of 75/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Danieli & C. Officine Meccaniche SpA's 3-Year EPS without NRI Growth Rate compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Danieli & C. Officine Meccaniche SpA ranks #1408 out of 2426 companies for 3-Year EPS without NRI Growth Rate. This places Danieli & C. Officine Meccaniche SpA in the lower half of its industry. The industry median 3-Year EPS without NRI Growth Rate is 3.70. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good 3-Year EPS without NRI Growth Rate for an Industrial Products company?
The median 3-Year EPS without NRI Growth Rate among Industrial Products companies is 3.70, based on 2,426 companies in the industry. Companies in the top quartile (top 25%) have a 3-Year EPS without NRI Growth Rate significantly above this median, while those in the bottom quartile fall well below. However, 3-Year EPS without NRI Growth Rate should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high 3-Year EPS without NRI Growth Rate mean?
A high 3-Year EPS without NRI Growth Rate can signal that a stock is expensive relative to its fundamentals. 3-Year EPS without NRI Growth Rate is the 3-year average growth rate of EPS without NRI. View historical data for Danieli & C. Officine Meccaniche SpA and its competitors. For the Industrial Products industry, the median 3-Year EPS without NRI Growth Rate is 3.70 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Danieli & C. Officine Meccaniche SpA's current 3-Year EPS without NRI Growth Rate is -2.50%. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Danieli & C. Officine Meccaniche SpA stock overvalued right now?
Based on GuruFocus' analysis, Danieli & C. Officine Meccaniche SpA (FRA:DAS) is currently considered Significantly Overvalued. The stock's GF Value™ is €30.87, compared to a current price of €66.55 — trading 115.6% above its estimated fair value. The current 3-Year EPS without NRI Growth Rate is -2.50%. Danieli & C. Officine Meccaniche SpA's overall GF Score™ is 75/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is 3-Year EPS without NRI Growth Rate calculated?
3-Year EPS without NRI Growth Rate is calculated from a company's financial statements. For Danieli & C. Officine Meccaniche SpA (FRA:DAS), the current 3-Year EPS without NRI Growth Rate is -2.50% as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Danieli & C. Officine Meccaniche SpA (FRA:DAS) Overvalued in 2026?
Based on GuruFocus' analysis, Danieli & C. Officine Meccaniche SpA stock appears to be overvalued.
The current stock price of €66.55 is trading 115.6% above its estimated GF Value™ of €30.87.
GuruFocus considers Danieli & C. Officine Meccaniche SpA to be Significantly Overvalued.
Key valuation signals for FRA:DAS:
3-Year EPS without NRI Growth Rate: -2.50%
GF Value™: €30.87 vs. price of €66.55 (115.6% above fair value)
No single metric tells the full story. See the FRA:DAS stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Danieli & C. Officine Meccaniche SpA is an Italy-based company that is engaged in manufacturing and distribution of steel and other nonferrous metal products as well as plant building. The company operates through two segments, namely steelmaking and plant making. The Steelmaking segment manufactures ingots, forged bars, blooms, rolled bars, bar in coils and others. End customers primarily come from the mechanical, automotive, oil & gas, power generation and other sectors. The Plant Making segment designs and builds mines, pellet production plants, furnaces, rolling mills and other various plants and facilities. The company has a global presence, with Europe, Middle East and Far East being the three largest markets for the company.
75GF Score
Get the complete analysis for FRA:DAS
3-Year EPS without NRI Growth Rate is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
FRA:DAS has been successfully added to your 
