Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Danieli & C. Officine Meccaniche SpAFRA:DAS -0.53%75 Shiller PE Ratio is 35.19 as of Aug. 28, 2026, which is 183% above its 10-year median of 12.45. GuruFocus rates FRA:DAS with a GF Score™ of 75/100 and a GF Value™ of €30.85 (Significantly Overvalued). The stock has 3 warning signs investors should review. Among 1,813 Industrial Products companies, Danieli & C. Officine Meccaniche SpA ranks worse than 55.49% on this metric.
FRA:DAS'
s Shiller PE Ratio Range Over the Past 10 Years
Min: 5.4 Med: 12.45 Max: 38.69
Current: 32.83
During the past 13 years, Danieli & C. Officine Meccaniche SpA's highest Shiller PE Ratio was 38.69. The lowest was 5.40. And the median was 12.45.
FRA:DAS's Shiller PE Ratio is ranked worse than 55.49% of 1813
companies
in the Industrial Products industry
Industry Median: 28.64
vs FRA:DAS: 32.83
E10 is a concept invented by Prof. Robert Shiller, who uses E10 for his Shiller PE Ratio calculation. E10 is the average of the inflation adjusted earnings of a company over the past 10 years.
Danieli & C. Officine Meccaniche SpA's adjusted earnings per share data of for the fiscal year that ended in Jun25 was €3.035. Add all the adjusted EPS for the past 10 years together and divide 10 will get our E10, which is €1.86 for the trailing ten years ended in Jun25.
Shiller PE for Stocks: The True Measure of Stock Valuation
Danieli & C. Officine Meccaniche SpA (FRA:DAS) Shiller PE Ratio Explanation
Compared with the regular PE Ratio, which works poorly for cyclical businesses, the Shiller PE Ratio smoothed out the fluctuations of profit margins during business cycles. Therefore it is more accurate in reflecting the valuation of the company.
If a company has consistent business performance, the Shiller PE Ratio should give similar results to regular PE Ratio.
Compared with the PS Ratio, the Shiller PE Ratio makes the comparison between different industries more meaningful.
Be Aware
Shiller PE Ratio assumes that over the long term, businesses and profitability revert to their means. If a company's business model does not work in the future compared with the past, Shiller PE Ratio and PS Ratio will give false valuations.
Danieli & C. Officine Meccaniche SpA Shiller PE Ratio Related Terms
Danieli & C. Officine Meccaniche SpA Shiller PE Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Danieli & C. Officine Meccaniche SpA Shiller PE Ratio Chart
FRA:DAS vs GEV, ETN, PH: Shiller PE Ratio Comparison
For the Specialty Industrial Machinery subindustry, Danieli & C. Officine Meccaniche SpA's Shiller PE Ratio, along with its competitors' market caps and Shiller PE Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Danieli & C. Officine Meccaniche SpA Shiller PE Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Danieli & C. Officine Meccaniche SpA's Shiller PE Ratio distribution charts can be found below:
* The bar in red indicates where Danieli & C. Officine Meccaniche SpA's Shiller PE Ratio falls into.
Danieli & C. Officine Meccaniche SpA Shiller PE Ratio Calculation
For Shiller PE Ratio, the earnings of the past 10 years are inflation-adjusted and averaged. The result is used for P/E calculation. Since it looks at the average over the last 10 years, the Shiller PE Ratio is also called PE10.
The Shiller PE Ratio was first used by professor Robert Shiller to measure the valuation of the overall market. The same calculation is applied here to individual companies.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Add all the adjusted EPS together and divide 10 will get our E10.
Please note that we use the CPI data of the country/region where the company is headquartered. If the CPI data for that country/region is not available, then we will use the CPI data of the United States as default.
Danieli & C. Officine Meccaniche SpA (FRA:DAS) has a Shiller PE Ratio of 35.19 as of Aug. 28, 2026. Shiller price-earnings ratio is the ratio of share price to a company's inflation-adjusted earnings over a 10-year period. View historical data on Danieli & C. Officine Meccaniche SpA and its competitors. This is 183% above median its historical median of 12.45. Over the past decade, Danieli & C. Officine Meccaniche SpA's Shiller PE Ratio has ranged from 5.40 to 38.69. According to the industry distribution chart, Danieli & C. Officine Meccaniche SpA ranks #1006 out of 1813 companies in the Industrial Products industry, placing it in the top 55.5%.
Is Danieli & C. Officine Meccaniche SpA's Shiller PE Ratio too high?
Danieli & C. Officine Meccaniche SpA's current Shiller PE Ratio of 35.19 is 183% above median its 10-year median of 12.45. Over the past 10 years, this metric has ranged from a low of 5.40 to a high of 38.69. The Industrial Products industry median Shiller PE Ratio is 28.64. Danieli & C. Officine Meccaniche SpA's value of 35.19 is 22.9% above this industry median. Based on the distribution chart, Danieli & C. Officine Meccaniche SpA ranks #1006 out of 1813 companies in the Industrial Products industry, which is below the industry midpoint. Overall, Danieli & C. Officine Meccaniche SpA has a GF Score™ of 75/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Danieli & C. Officine Meccaniche SpA's Shiller PE Ratio compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Danieli & C. Officine Meccaniche SpA ranks #1006 out of 1813 companies for Shiller PE Ratio. This places Danieli & C. Officine Meccaniche SpA in the lower half of its industry. The industry median Shiller PE Ratio is 28.64. Danieli & C. Officine Meccaniche SpA's value of 35.19 is 22.9% above this benchmark. Historically, Danieli & C. Officine Meccaniche SpA's own Shiller PE Ratio has ranged from 5.40 to 38.69 over the past decade. While the company's 10-year median is 12.45 vs. the industry median of 28.64, Danieli & C. Officine Meccaniche SpA has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Shiller PE Ratio for an Industrial Products company?
The median Shiller PE Ratio among Industrial Products companies is 28.64, based on 1,813 companies in the industry. Companies in the top quartile (top 25%) have a Shiller PE Ratio significantly above this median, while those in the bottom quartile fall well below. However, Shiller PE Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Danieli & C. Officine Meccaniche SpA's current Shiller PE Ratio of 35.19 is 22.9% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Shiller PE Ratio mean?
A high Shiller PE Ratio can signal that a stock is expensive relative to its fundamentals. Shiller price-earnings ratio is the ratio of share price to a company's inflation-adjusted earnings over a 10-year period. View historical data on Danieli & C. Officine Meccaniche SpA and its competitors. For the Industrial Products industry, the median Shiller PE Ratio is 28.64 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Danieli & C. Officine Meccaniche SpA's current Shiller PE Ratio is 35.19, which is 183% above median its own 10-year median of 12.45. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Danieli & C. Officine Meccaniche SpA stock overvalued right now?
Based on GuruFocus' analysis, Danieli & C. Officine Meccaniche SpA (FRA:DAS) is currently considered Significantly Overvalued. The stock's GF Value™ is €30.85, compared to a current price of €65.45 — trading 112.2% above its estimated fair value. The current Shiller PE Ratio is 35.19, which is 183% above median its 10-year median of 12.45 and 22.9% above the Industrial Products industry median of 28.64. Danieli & C. Officine Meccaniche SpA's overall GF Score™ is 75/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Shiller PE Ratio calculated?
Shiller PE Ratio is calculated from a company's financial statements. For Danieli & C. Officine Meccaniche SpA (FRA:DAS), the current Shiller PE Ratio is 35.19 as of Aug. 28, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Danieli & C. Officine Meccaniche SpA (FRA:DAS) Overvalued in 2026?
Based on GuruFocus' analysis, Danieli & C. Officine Meccaniche SpA stock appears to be overvalued.
The current stock price of €65.45 is trading 112.2% above its estimated GF Value™ of €30.85.
GuruFocus considers Danieli & C. Officine Meccaniche SpA to be Significantly Overvalued.
Key valuation signals for FRA:DAS:
Shiller PE Ratio: 35.19 (183% above median its 10-year median of 12.45)
GF Value™: €30.85 vs. price of €65.45 (112.2% above fair value)
Industry Position: 22.9% above the Industrial Products median (#1006 of 1813)
No single metric tells the full story. See the FRA:DAS stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Danieli & C. Officine Meccaniche SpA is an Italy-based company that is engaged in manufacturing and distribution of steel and other nonferrous metal products as well as plant building. The company operates through two segments, namely steelmaking and plant making. The Steelmaking segment manufactures ingots, forged bars, blooms, rolled bars, bar in coils and others. End customers primarily come from the mechanical, automotive, oil & gas, power generation and other sectors. The Plant Making segment designs and builds mines, pellet production plants, furnaces, rolling mills and other various plants and facilities. The company has a global presence, with Europe, Middle East and Far East being the three largest markets for the company.
75GF Score
Get the complete analysis for FRA:DAS
Shiller PE Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
FRA:DAS has been successfully added to your 
