Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Danieli & C. Officine Meccaniche SpAFRA:DAS +0.69%68 3-Year EBITDA Growth Rate is 4.60% as of Dec. 2025, which is 30% below its 10-year median of 6.55. GuruFocus rates FRA:DAS with a GF Score™ of 68/100 and a GF Value™ of €29.32 (Significantly Overvalued). The stock has 7 warning signs investors should review. Among 2,598 Industrial Products companies, Danieli & C. Officine Meccaniche SpA ranks better than 50.62% on this metric.
During the past 12 months, Danieli & C. Officine Meccaniche SpA's average EBITDA Per Share Growth Rate was -6.70% per year.
During the past 3 years, the average EBITDA Per Share Growth Rate was 4.60% per year.
During the past 5 years, the average EBITDA Per Share Growth Rate was 20.00% per year.
During the past 10 years, the average EBITDA Per Share Growth Rate was 8.40% per year.
Please click Growth Rate Calculation Example (GuruFocus) to see how GuruFocus calculates Wal-Mart Stores Inc (WMT)'s revenue growth rate. You can apply the same method to get the average EBITDA per share growth rate.
During the past 13 years, the highest 3-Year average EBITDA Per Share Growth Rate of Danieli & C. Officine Meccaniche SpA was 29.50% per year. The lowest was -19.10% per year. And the median was 6.55% per year.
EBITDA per Share is the amount of Earnings Before Interest, Taxes, Depreciation, and Amortization (EBITDA) per outstanding share of the company's stock.
Earnings Before Interest, Taxes, Depreciation, and Amortization (EBITDA) is what the company earns before it expenses interest, taxes, depreciation and amortization.
Danieli & C. Officine Meccaniche SpA 3-Year EBITDA Growth Rate Related Terms
FRA:DAS vs GEV, ETN, PH: 3-Year EBITDA Growth Rate Comparison
For the Specialty Industrial Machinery subindustry, Danieli & C. Officine Meccaniche SpA's 3-Year EBITDA Growth Rate, along with its competitors' market caps and 3-Year EBITDA Growth Rate data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Danieli & C. Officine Meccaniche SpA 3-Year EBITDA Growth Rate vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Danieli & C. Officine Meccaniche SpA's 3-Year EBITDA Growth Rate distribution charts can be found below:
* The bar in red indicates where Danieli & C. Officine Meccaniche SpA's 3-Year EBITDA Growth Rate falls into.
This is the 3-year average growth rate of EBITDA per Share. The growth rate is calculated using exponential compounding based on the latest four year annual data.
Please click Growth Rate Calculation Example (GuruFocus) to see how GuruFocus calculates Wal-Mart Stores Inc (WMT)'s revenue growth rate. You can apply the same method to get the average EBITDA per share growth rate.
What does a 3-Year EBITDA Growth Rate of 4.60% mean?
Danieli & C. Officine Meccaniche SpA (FRA:DAS) has a 3-Year EBITDA Growth Rate of 4.60% as of Dec. 2025. 3-Year EBITDA Growth Rate is the 3-year average growth rate of EBITDA per share. View historical data for Danieli & C. Officine Meccaniche SpA and its competitors. This is 30% below median its historical median of 6.55. According to the industry distribution chart, Danieli & C. Officine Meccaniche SpA ranks #1283 out of 2598 companies in the Industrial Products industry, placing it in the top 49.4%.
Is Danieli & C. Officine Meccaniche SpA's 3-Year EBITDA Growth Rate too high?
Danieli & C. Officine Meccaniche SpA's current 3-Year EBITDA Growth Rate of 4.60% is 30% below median its 10-year median of 6.55. The Industrial Products industry median 3-Year EBITDA Growth Rate is 4.35. Danieli & C. Officine Meccaniche SpA's value of 4.60% is 5.7% above this industry median. Based on the distribution chart, Danieli & C. Officine Meccaniche SpA ranks #1283 out of 2598 companies in the Industrial Products industry, which is above the industry midpoint. Overall, Danieli & C. Officine Meccaniche SpA has a GF Score™ of 68/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Danieli & C. Officine Meccaniche SpA's 3-Year EBITDA Growth Rate compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Danieli & C. Officine Meccaniche SpA ranks #1283 out of 2598 companies for 3-Year EBITDA Growth Rate. This puts Danieli & C. Officine Meccaniche SpA in the upper half of its industry. The industry median 3-Year EBITDA Growth Rate is 4.35. Danieli & C. Officine Meccaniche SpA's value of 4.60% is 5.7% above this benchmark. While the company's 10-year median is 6.55 vs. the industry median of 4.35, Danieli & C. Officine Meccaniche SpA has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good 3-Year EBITDA Growth Rate for an Industrial Products company?
The median 3-Year EBITDA Growth Rate among Industrial Products companies is 4.35, based on 2,598 companies in the industry. Companies in the top quartile (top 25%) have a 3-Year EBITDA Growth Rate significantly above this median, while those in the bottom quartile fall well below. However, 3-Year EBITDA Growth Rate should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Danieli & C. Officine Meccaniche SpA's current 3-Year EBITDA Growth Rate of 4.60% is 5.7% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high 3-Year EBITDA Growth Rate mean?
A high 3-Year EBITDA Growth Rate can signal that a stock is expensive relative to its fundamentals. 3-Year EBITDA Growth Rate is the 3-year average growth rate of EBITDA per share. View historical data for Danieli & C. Officine Meccaniche SpA and its competitors. For the Industrial Products industry, the median 3-Year EBITDA Growth Rate is 4.35 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Danieli & C. Officine Meccaniche SpA's current 3-Year EBITDA Growth Rate is 4.60%, which is 30% below median its own 10-year median of 6.55. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Danieli & C. Officine Meccaniche SpA stock overvalued right now?
Based on GuruFocus' analysis, Danieli & C. Officine Meccaniche SpA (FRA:DAS) is currently considered Significantly Overvalued. The stock's GF Value™ is €29.32, compared to a current price of €65.20 — trading 122.4% above its estimated fair value. The current 3-Year EBITDA Growth Rate is 4.60%, which is 30% below median its 10-year median of 6.55 and 5.7% above the Industrial Products industry median of 4.35. Danieli & C. Officine Meccaniche SpA's overall GF Score™ is 68/100 with 7 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is 3-Year EBITDA Growth Rate calculated?
3-Year EBITDA Growth Rate is calculated from a company's financial statements. For Danieli & C. Officine Meccaniche SpA (FRA:DAS), the current 3-Year EBITDA Growth Rate is 4.60% as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Danieli & C. Officine Meccaniche SpA (FRA:DAS) Overvalued in 2026?
Based on GuruFocus' analysis, Danieli & C. Officine Meccaniche SpA stock appears to be overvalued.
The current stock price of €65.20 is trading 122.4% above its estimated GF Value™ of €29.32.
GuruFocus considers Danieli & C. Officine Meccaniche SpA to be Significantly Overvalued.
Key valuation signals for FRA:DAS:
3-Year EBITDA Growth Rate: 4.60% (30% below median its 10-year median of 6.55)
GF Value™: €29.32 vs. price of €65.20 (122.4% above fair value)
Industry Position: 5.7% above the Industrial Products median (#1283 of 2598)
No single metric tells the full story. See the FRA:DAS stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Danieli & C. Officine Meccaniche SpA is an Italy-based company that is engaged in manufacturing and distribution of steel and other nonferrous metal products as well as plant building. The company operates through two segments, namely steelmaking and plant making. The Steelmaking segment manufactures ingots, forged bars, blooms, rolled bars, bar in coils and others. End customers primarily come from the mechanical, automotive, oil & gas, power generation and other sectors. The Plant Making segment designs and builds mines, pellet production plants, furnaces, rolling mills and other various plants and facilities. The company has a global presence, with Europe, Middle East and Far East being the three largest markets for the company.
68GF Score
Get the complete analysis for FRA:DAS
3-Year EBITDA Growth Rate is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
FRA:DAS has been successfully added to your 
