Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
12-1 Month Momentum % is the total return of the stock from 12-month ago to 1-month ago. As of today (2026-08-04), Danieli & C. Officine Meccaniche SpA's 12-1 Month Momentum % is 85.27%.
FRA:DAS's 12-1 Month Momentum % is ranked better than 86.69% of 3012
companies
in the Industrial Products industry
Industry Median: 3.09
vs FRA:DAS: 85.27
Momentum investing is a trading strategy in which investors buy securities that are rising and sell before the prices start to go back down. The 12-1 Month Momentum % measures the total return to a stock over the past twelve months, but ignores the previous month.
The reason why the most recent month’s return dropped related to the short-term reversal effect associated with momentum. There is an academic finding that short-term momentum actually has a reversal effect, whereby the previous winners (measured over the past months) do poorly the next month, while the previous losers do well the next month. In order to eliminate the short-term reversal effect, the previous month return was not included in this calculation.
Danieli & C. Officine Meccaniche SpA 12-1 Month Momentum % Related Terms
FRA:DAS vs GEV, ETN, PH: 12-1 Month Momentum % Comparison
For the Specialty Industrial Machinery subindustry, Danieli & C. Officine Meccaniche SpA's 12-1 Month Momentum %, along with its competitors' market caps and 12-1 Month Momentum % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Danieli & C. Officine Meccaniche SpA 12-1 Month Momentum % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Danieli & C. Officine Meccaniche SpA's 12-1 Month Momentum % distribution charts can be found below:
* The bar in red indicates where Danieli & C. Officine Meccaniche SpA's 12-1 Month Momentum % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Danieli & C. Officine Meccaniche SpA (FRA:DAS) has a 12-1 Month Momentum % of 85.27% as of Aug. 04, 2026. 12-1 Month Momentum measures the total return of the stock from 12-month ago to 1-month ago. View historical data on Danieli & C. Officine Meccaniche SpA and its competitors. According to the industry distribution chart, Danieli & C. Officine Meccaniche SpA ranks #401 out of 3012 companies in the Industrial Products industry, placing it in the top 13.3%.
Is Danieli & C. Officine Meccaniche SpA's 12-1 Month Momentum % too high?
Danieli & C. Officine Meccaniche SpA's current 12-1 Month Momentum % is 85.27%. The Industrial Products industry median 12-1 Month Momentum % is 3.09. Danieli & C. Officine Meccaniche SpA's value of 85.27% is 2659.5% above this industry median. Based on the distribution chart, Danieli & C. Officine Meccaniche SpA ranks #401 out of 3012 companies in the Industrial Products industry, which is in the top quartile — a strong position relative to peers. Overall, Danieli & C. Officine Meccaniche SpA has a GF Score™ of 68/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Danieli & C. Officine Meccaniche SpA's 12-1 Month Momentum % compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Danieli & C. Officine Meccaniche SpA ranks #401 out of 3012 companies for 12-1 Month Momentum %. This places Danieli & C. Officine Meccaniche SpA in the top 13% of its industry — outperforming the majority of peers. The industry median 12-1 Month Momentum % is 3.09. Danieli & C. Officine Meccaniche SpA's value of 85.27% is 2659.5% above this benchmark. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good 12-1 Month Momentum % for an Industrial Products company?
The median 12-1 Month Momentum % among Industrial Products companies is 3.09, based on 3,012 companies in the industry. Companies in the top quartile (top 25%) have a 12-1 Month Momentum % significantly above this median, while those in the bottom quartile fall well below. However, 12-1 Month Momentum % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Danieli & C. Officine Meccaniche SpA's current 12-1 Month Momentum % of 85.27% is 2659.5% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high 12-1 Month Momentum % mean?
A high 12-1 Month Momentum % can signal that a stock is expensive relative to its fundamentals. 12-1 Month Momentum measures the total return of the stock from 12-month ago to 1-month ago. View historical data on Danieli & C. Officine Meccaniche SpA and its competitors. For the Industrial Products industry, the median 12-1 Month Momentum % is 3.09 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Danieli & C. Officine Meccaniche SpA's current 12-1 Month Momentum % is 85.27%. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Danieli & C. Officine Meccaniche SpA stock overvalued right now?
Based on GuruFocus' analysis, Danieli & C. Officine Meccaniche SpA (FRA:DAS) is currently considered Significantly Overvalued. The stock's GF Value™ is €29.32, compared to a current price of €65.20 — trading 122.4% above its estimated fair value. The current 12-1 Month Momentum % is 85.27% and 2659.5% above the Industrial Products industry median of 3.09. Danieli & C. Officine Meccaniche SpA's overall GF Score™ is 68/100 with 7 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is 12-1 Month Momentum % calculated?
12-1 Month Momentum % is calculated from a company's financial statements. For Danieli & C. Officine Meccaniche SpA (FRA:DAS), the current 12-1 Month Momentum % is 85.27% as of Aug. 04, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Danieli & C. Officine Meccaniche SpA (FRA:DAS) Overvalued in 2026?
Based on GuruFocus' analysis, Danieli & C. Officine Meccaniche SpA stock appears to be overvalued.
The current stock price of €65.20 is trading 122.4% above its estimated GF Value™ of €29.32.
GuruFocus considers Danieli & C. Officine Meccaniche SpA to be Significantly Overvalued.
Key valuation signals for FRA:DAS:
12-1 Month Momentum %: 85.27%
GF Value™: €29.32 vs. price of €65.20 (122.4% above fair value)
Industry Position: 2659.5% above the Industrial Products median (#401 of 3012)
No single metric tells the full story. See the FRA:DAS stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Danieli & C. Officine Meccaniche SpA is an Italy-based company that is engaged in manufacturing and distribution of steel and other nonferrous metal products as well as plant building. The company operates through two segments, namely steelmaking and plant making. The Steelmaking segment manufactures ingots, forged bars, blooms, rolled bars, bar in coils and others. End customers primarily come from the mechanical, automotive, oil & gas, power generation and other sectors. The Plant Making segment designs and builds mines, pellet production plants, furnaces, rolling mills and other various plants and facilities. The company has a global presence, with Europe, Middle East and Far East being the three largest markets for the company.
68GF Score
Get the complete analysis for FRA:DAS
12-1 Month Momentum % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
FRA:DAS has been successfully added to your 
